Arecont Vision MegaDome AV5155 Käyttöohje

Arecont Vision Turvakamera MegaDome AV5155

Lue alta 📖 käyttöohje suomeksi merkille Arecont Vision MegaDome AV5155 (17 sivua) kategoriassa Turvakamera. Tämä opas oli hyödyllinen 6 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/17
Arecont Vision MegaDomeTM Installation Manual
0 | P a g e
Arecont Vision MegaDomeTM Installation Manual
1 | P a g e
MegaDome™ Installation Manual
A. Arecont Vision MegaDomeTM
Inside the box:
B. Mounting template
C. Magnetic core
D. Pack of four (4) wood screws and four (4)
dry wall anchors
E. One double sided hex key
F. One single sided hex key
G. Security L- key
H. Power cable
#1 Phillips head screw driver
Not included but needed:
#2 Phillips head screw driver
Image 1
Mounting the Camera:
1. Remove camera and hardware from the
box.
2. Using the Mounting template, prepare the
mounting provisions for camera
installation. NOTE: the 19.5mm diameter
hole on the Mounting template is where
the Ethernet cable will be exiting the
MegaDomeTM, align accordingly. If using
the side conduit hole, please see step 9
below.
3. Using Security L key, loosen the four (4) -
screws securing the dome cover (Image
2). Remove vandal resistant dome
cover. NOTE: Do not remove screws
from the dome cover.
2 Image
H G F E C
A D B
Arecont Vision MegaDomeTM Installation Manual
2 | P a g e
4. Run Ethernet cable through hole the on the
bottom of the camera (Image 3) and plug it
into the RJ45 port. NOTE: If the camera will
be powered via PoE, please skip to step 6.
5. If the camera is powered by an outside power
supply, run the supplied power cable through
the hole and connect it to its respective
connector inside the camera (Image 3).
NOTE: Make sure that your installation of
wires complies with Electrical Code of the
local government where the camera is
installed and no bare wires are exposed.
6. Align the holes in the camera with the
prepared holes on the mounting surface.
Attach the camera to the mounting surface
with the wood optional screws or any
hardware suitable for the mounting surface.
7. Install the included magnetic core onto the
Ethernet cable as shown in Image 4. NOTE:
Ensure both tabs are tightly secured.
Image 3
Image 4
HOLE
POWER
RJ- 45

Tuotetiedot

Merkki: Arecont Vision
Kategoria: Turvakamera
Malli: MegaDome AV5155

Tarvitsetko apua?

Jos tarvitset apua merkille Arecont Vision MegaDome AV5155 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Turvakamera Arecont Vision Käyttöohjeet

Turvakamera Käyttöohjeet

Viimeisimmät Turvakamera Käyttöohjeet

Lorex

Lorex E893AB-E Käyttöohje

2 Huhtikuuta 2025
Yale

Yale YRD430 Käyttöohje

30 Maaliskuuta 2025
BirdDog

BirdDog X1 Käyttöohje

30 Maaliskuuta 2025
BirdDog

BirdDog X1 Ultra Käyttöohje

30 Maaliskuuta 2025
Hanwha

Hanwha QNE-C9013RL Käyttöohje

30 Maaliskuuta 2025
HiLook

HiLook THC-T150-M Käyttöohje

27 Maaliskuuta 2025
Reolink

Reolink W320 Käyttöohje

27 Maaliskuuta 2025