Honeywell YRTH8560D1009/U Käyttöohje

Honeywell Termostaatti YRTH8560D1009/U

Lue alta 📖 käyttöohje suomeksi merkille Honeywell YRTH8560D1009/U (20 sivua) kategoriassa Termostaatti. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/20
RTH8500 Series
Programmable Thermostat
Quick Installation Guide
PM
Menu nMode Fa
Fan
Aut o
Mode
Heat
Wake Away Home Sleep
Following Schedule
Tools you will need Tools you may need
Wire stripper
Needle-nose pliers Drill and
drill bit (7/32 in)
Included in your box
Small flat head scr
ewdriver
Phillips scr
ewdriver
Pencil
Level
Screws and
anchors
UWP™
Mounting
System
(UWP)
RTH8500
Thermostat
Quick Install
Guide
Read and save these
instructions.
For help please visit
honeywellhome.com
Find rebates: HoneywellHome.com/Rebates
2
Quick Installation Guide
Removing your old thermostat
2 Check that your system is off.
Change the temperature on your
old thermostat. If you don’t hear the
system turn on within 5 minutes, the
power is off.
Note: If you have a digital
thermostat that has a blank display,
skip this step
1 Turn power OFF.
To protect yourself and your
equipment, Turn off the power at the
breaker box or switch that controls
your heating/cooling system.
3 Remove the old thermostat’s
faceplate.
On most thermostats, you can take
off the faceplate by grasping and
gently pulling. Some thermostats
may have screws, buttons, or clasps.
Do not remove any wires from your
thermostat at this time!
75
OFF
OFF
ON
Breaker box
Switch
4 Make sure there are no 120/240V
wires.
Do you have thick black wires with
wire nuts?
Is your thermostat 120V or higher?
If you answered yes to either of
these questions, you have a line
voltage system and the thermostat
will not work.
If you are unsure visit:
honeywellhome.com/support
Wire nut
Thick black wire
3
RTH8500 Series
5 Take a picture of how your wiring
looks right now.
Be sure to include the letters
next to the terminals where the
wires are inserted. This will be a
helpful reference when wiring your
thermostat.
Tip: If the color of your wires has
faded or if 2 terminals have the
same wire color, use the wire labels
provided in the package to label
each wire.
6 Record if you have wires in the following terminals.
Do not include jumpers as a part of your count. The thermostat does not
need jumpers.
Terminal Wire Color
R
Rh
Rc
7 Write down the color of the wires.
Check mark the wires that are connected to terminals. Next to the check mark,
write down the color of the wire. Do not include jumpers as a part of your
count.
Check all that apply (Not all will apply):
Terminal Wire Color
Y
Y2
G
C
Terminal Wire Color
A or L/A
O/B
W2 or AUX
E
W
K
The RTH8500 thermostat does not support S or U terminals.
If there are wires in terminals that are not listed, you will need additional
wiring support. honeywellhome.com/support Visit to find out if the thermostat
will work for you.

Tuotetiedot

Merkki: Honeywell
Kategoria: Termostaatti
Malli: YRTH8560D1009/U

Tarvitsetko apua?

Jos tarvitset apua merkille Honeywell YRTH8560D1009/U esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Termostaatti Honeywell Käyttöohjeet

Termostaatti Käyttöohjeet

Viimeisimmät Termostaatti Käyttöohjeet