Husqvarna-Viking Huskystar 207 Käyttöohje
Husqvarna-Viking
Ompelukone
Huskystar 207
Lue alta 📖 käyttöohje suomeksi merkille Husqvarna-Viking Huskystar 207 (40 sivua) kategoriassa Ompelukone. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/40
207/215
User’s Guide
Type B
This houshold sewing machine is designed to comply with IEC/EN 60335-2-28 and UL1594
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety precautions should always be followed,
including the following:
Read all instructions before using this household sewing machine.
DANGER - To reduce the risk of electric shock:
• A sewing machine should never be left unattended when plugged in. Always
unplug this sewing machine from the electric outlet immediately after using and
before cleaning.
• Always unplug before relamping. Replace bulb with same type rated 15 Watt.
WARNING - To reduce the risk of burns, fi re, electric
shock, or injury to persons:
• This sewing machine is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning use
of the sewing machine by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the sewing
machine.
• Use this sewing machine only for its intended use as described in this manual. Use
only attachments recommended by the manufacturer as contained in this manual.
• Never operate this sewing machine if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or dropped into water.
Return the sewing machine to the nearest authorized dealer or service center for
examination, repair, electrical or mechanical adjustment.
• Never operate the sewing machine with any air openings blocked. Keep ventilation
openings of the sewing machine and foot controller free from the accumulation of
lint, dust, and loose cloth.
• Keep fi ngers away from all moving parts. Special care is required around the sewing
machine needle.
• Always use the proper needle plate. The wrong plate can cause the needle to break.
• Do not use bent needles.
• Do not pull or push fabric while stitching. It may defl ect the needle causing it to
break.
• Switch the sewing machine off (“0”) when making any adjustment in the needle
area, such as threading needle, changing needle, threading bobbin, or changing
presser foot, etc.
• Always unplug sewing machine from the electrical outlet when removing covers,
lubricating, or when making any other user servicing adjustments mentioned in the
instruction manual.
• Never drop or insert any object into any opening.
• Do not use outdoors.
• Do not operate where aerosol (spray) products are being used or where oxygen is
being administrated.
• To disconnect, turn all controls to the off (“0”) position, then remove plug from
outlet.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
SAVE THESE INSTRUCTIONS
For the USA and Canada
This sewing machine has a polarized plug (one blade wider than the other). To reduce
the risk of electric shock, this plug is intended to fi t in a polarized outlet only one way.
If the plug does not fi t fully in the outlet, reverse the plug. If it still does not fi t, contact
a qualifi ed electrician to install the proper outlet. Do not modify the plug in any way.
1
SECTION 1
ESSENTIAL PARTS
Names of Parts 2
SECTION 2
GETTING READY TO SEW
Extension Table 3
Standard Accessories and
Storage Place 4
Connecting the Machine to the
Power Supply 5
Foot Control 5
Sewing Light 6
To Attach and Remove the
Presser Foot 6
Changing Needles 7
Thread and Needle Chart 7
Setting Spool Pins 8
Removing or Inserting the
Bobbin Case 8
Winding the Bobbin 9
Threading Bobbin Case 10
Threading the Machine 11
Bringing Up Bobbin Thread 12
Balancing Needle Thread
Tension 13
Pattern Selector Dial 14
Stitch Length Dial 15
Stitch Width Dial 15
Reverse Stitch Button 16
Dropping the Feed Teeth 16
Presser Foot Pressure Dial 16
SECTION 3
BASIC SEWING
Straight Stitch Sewing 17
To Change Sewing Direction 18
Using the Seam Guides on
the Needle Plate 19
Turning Square Corners 19
Zigzag Stitching 20
SECTION 4
UTILITY STITCHING
Overcasting 21
Multiple Zigzag 21
Overcast Stitch (Model 215) 22
Reinforced Straight Stitch ( Mod el 215)
22
Sewing Buttons 23
Buttonhole 24-25
Corded Buttonhole 26
Zipper Sewing 27
Blind Stitch Hemming 28
SECTION 5
DECORATIVE STITCHING
Shell Tuck 29
Stretch Stitch Patterns (Model 215) 29
Smocking (Model 215) 30
Elastic Casing Stitching (Model 215) 30
Applique 31
Fagoting (Model 215) 31
SECTION 6
CARE OF YOUR MACHINE
Dismantling and Assembling the
Hook Assembly Area 32
Cleaning the Feed Teeth 33
Oiling the Machine 34
Troubleshooting 35-36
TABLE OF CONTENTS
Tuotetiedot
| Merkki: | Husqvarna-Viking |
| Kategoria: | Ompelukone |
| Malli: | Huskystar 207 |
Tarvitsetko apua?
Jos tarvitset apua merkille Husqvarna-Viking Huskystar 207 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Ompelukone Husqvarna-Viking Käyttöohjeet
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
Ompelukone Käyttöohjeet
Viimeisimmät Ompelukone Käyttöohjeet
23 Lokakuuta 2024
19 Lokakuuta 2024
19 Lokakuuta 2024
18 Lokakuuta 2024
15 Lokakuuta 2024