Impact EX-100A Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Impact EX-100A (20 sivua) kategoriassa Lamppu. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/20
EX-100A Monolight
INSTRUCTIONS
impactTM
Thank you for your purchase of the Impact EX-100A Monolight. The
EX-100A Monolight is economical and lightweight, yet durable enough to
give you many years of trouble-free service and enjoyment. Please read
these operating instructions and safet y precautions carefully before
operating this equipment.
Features
• Three-stop range – full power to 1/8 power, steplessly
• Built-in optical slave
• Modeling lamp can be set to proportional or full power
• Accepts Elinchrom-st yle reectors and head accessories
(8-inch grid reector included)
• Tactile, “grippy” feel that resists slipping, scratches, and shock damage
• Commonly available 1/8˝ mini-plug sync input
• Low 4.3V trigger voltage – safe for any camera’s circuitr y
Power Requirements
This light comes in two models; one is designed for use with 110/120V AC power in the US
and the other for 220V AC power in Europe. Neither model can be used outside of its
native power region. Both are supplied with a three-prong, grounded plug. Do not
attempt to defeat this safety feature. If necessary, use only grounded extension cords
rated for six amps or greater.
Warning
There are no user-serviceable parts inside the unit. Only qualied service engineers
should access the inside of the case (Danger – high-voltage parts inside). Avoid damage
to both the ashtube and modeling lamp. If the modeling lamp or ashtube become
cracked or damaged in any way, they should be replaced immediately. Do not use your
ash unit in an environment where moisture or ammable vapor is likely to come in
contact with the unit. Turn the power off and unplug the power cord when the unit is not
in use. Always remove the modeling lamp and replace the protective cap when
transporting the unit . Avoid strong light falling onto the slave cell as it will prevent
efcient operation. If the unit blows a fuse, a replacement fuse can be inserted in the
pull-out compartment on the back of the unit. To ensure long life of the ash capacitors,
the ash unit should be powered up and red several times at least every two months.
All images in this manual are for illustrative purposes only. Your unit may differ slightly from the one pictured.
Mount on a stand
(1) Select a stand or support
system of suitable weight
and dimensions to ensure
stable operation of the unit .
Install Reector &
Modeling Lamp
(2) Remove the protective
cap by pressing in and
turning it counter-
clockwise. Pull the cap off
and set aside.
(3) Install the modeling
lamp by screwing it into the
threaded socket.
CAUTION: Do not touch the lamp with your bare hands. Oil residue from your ngers can
cause the surface of the lamp to heat unevenly and explode. Use white cotton gloves or a
clean cloth.
(4) Install the reector where the protective cap was before. Align the two notches on
the reector with the white guidelines on the ash unit , press the reector in and rotate
clockwise until it locks in place. Rotate the outer ring to secure the reector.
Note: Take care when tting or removing reectors or softboxes to not damage the
ashtube assembly. The ashtube is very delicate. Always switch off the unit and
disconnect the power before tting or changing lamps, ashtubes, reectors, or softboxes.
Preparing Your Monolight for Use
1
3 4
2
Tuotetiedot
| Merkki: | Impact |
| Kategoria: | Lamppu |
| Malli: | EX-100A |
Tarvitsetko apua?
Jos tarvitset apua merkille Impact EX-100A esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Lamppu Impact Käyttöohjeet
21 Tammikuuta 2025
21 Tammikuuta 2025
21 Tammikuuta 2025
21 Tammikuuta 2025
21 Tammikuuta 2025
21 Tammikuuta 2025
21 Tammikuuta 2025
21 Tammikuuta 2025
21 Tammikuuta 2025
21 Tammikuuta 2025
Lamppu Käyttöohjeet
- Lamppu Ledlenser
- Lamppu AFX
- Lamppu Hama
- Lamppu Neewer
- Lamppu Hazet
- Lamppu Philips
- Lamppu Topeak
- Lamppu Schwaiger
- Lamppu Godox
- Lamppu IKEA
- Lamppu Samsung
- Lamppu Sony
- Lamppu Xiaomi
- Lamppu Trust
- Lamppu Integral LED
- Lamppu Lutec
- Lamppu Golden Lighting
- Lamppu ET2
- Lamppu Quoizel
- Lamppu Crystorama
- Lamppu Brennenstuhl
- Lamppu Aputure
- Lamppu NEO Tools
- Lamppu Westinghouse
- Lamppu Schneider
- Lamppu Dainolite
- Lamppu EMOS
- Lamppu Nanlite
- Lamppu Cameo
- Lamppu BeamZ
- Lamppu Livoo
- Lamppu Steinel
- Lamppu Flex
- Lamppu Maxim
- Lamppu Nordlux
- Lamppu Brandson
- Lamppu NUVO
- Lamppu Maginon
- Lamppu Sonneman
- Lamppu Elgato
- Lamppu Ansmann
- Lamppu Makita
- Lamppu Intermatic
- Lamppu V-Tac
- Lamppu JBL
- Lamppu Nedis
- Lamppu Elation
- Lamppu Fredrick Ramond
- Lamppu Chauvet
- Lamppu Karma
- Lamppu Ridem
- Lamppu Dedra
- Lamppu Black Diamond
- Lamppu Powerplus
- Lamppu BenQ
- Lamppu Hansa
- Lamppu Livarno Lux
- Lamppu Eurolite
- Lamppu Casalux
- Lamppu Beghelli
- Lamppu American DJ
- Lamppu Profoto
- Lamppu Claypaky
- Lamppu Petzl
- Lamppu Gravity
- Lamppu Ikan
- Lamppu AVM
- Lamppu Olight
- Lamppu Honeywell
- Lamppu Theben
- Lamppu Vimar
- Lamppu Genaray
- Lamppu Physa
- Lamppu Altman
- Lamppu Setti+
- Lamppu Kanlux
- Lamppu Xline
- Lamppu ARRI
- Lamppu Osram
- Lamppu Savio
- Lamppu Bresser
- Lamppu Currey & Company
- Lamppu Deko-Light
- Lamppu Cateye
- Lamppu Zhiyun
- Lamppu Angler
- Lamppu ColorKey
- Lamppu Livex Lighting
- Lamppu Hinkley Lighting
- Lamppu Ranex
- Lamppu COLBOR
- Lamppu Norwell
- Lamppu Bolt
- Lamppu Lucide
- Lamppu Nicols
- Lamppu HQ Power
- Lamppu Heitronic
- Lamppu Dorr
- Lamppu Apa
- Lamppu Pixel
- Lamppu Silva
- Lamppu Allegri
- Lamppu Perfect Christmans
- Lamppu XCell
- Lamppu Jinbei
- Lamppu Exagerate
- Lamppu Craftmade
- Lamppu Unilux
- Lamppu Trio Lighting
- Lamppu Louis Poulsen
- Lamppu SLV
- Lamppu Rotolight
- Lamppu Falcon Eyes
- Lamppu Yeelight
- Lamppu Lowel
- Lamppu Schonbek
- Lamppu Hoffman
Viimeisimmät Lamppu Käyttöohjeet
8 Huhtikuuta 2025
8 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
4 Huhtikuuta 2025
4 Huhtikuuta 2025
4 Huhtikuuta 2025
4 Huhtikuuta 2025
4 Huhtikuuta 2025