Infinity Kappa 1.1cs Käyttöohje
Infinity
Auton kaiutin
Kappa 1.1cs
Lue alta 📖 käyttöohje suomeksi merkille Infinity Kappa 1.1cs (4 sivua) kategoriassa Auton kaiutin. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/4
Thank you for purchasing an Infinity Kappa Series 3-Way
Component System. We’ve organized this manual to make your installation
as simple and trouble-free as possible. Please read it thoroughly before
proceeding. Remember to keep your sales receipt with this manual in a
safe place so both are available for future reference.
®
K
A P PA
S
ERIES
653.1cs, 1.1cs
I N S T R U C T I O N S
- 2 -
IMPORTANT: Installation of automotive stereo
components can require extensive experience
with a variety of mechanical and electrical proce-
dures. Although these instructions explain how to
install a Kappa Series 3-Way Component System
in a general sense, they do not show the exact
installation methods for your particular vehicle. If
you do not feel you have the experience, do not
attempt the installation yourself, but instead ask
your Authorized Infinity Car Audio Dealer about
professional installation options.
WARNING: Playing loud music in an automotive
environment can permanently damage your
hearing, as well as hinder your ability to hear
traffic. The maximum volume levels achievable
with Infinity speakers, combined with high
power amplification, may exceed safe levels for
extended listening. We recommend using low
volume levels when driving. Infinity accepts
no liability for hearing loss, bodily injury or
property damage as a result of use or misuse of
this product.
S PPEAKER LACEMENT
Kappa speakers are designed to be easily
installed in stock speaker locations. While mount-
ing your speakers in the original factory locations
will, in most cases, provide excellent sonic
results, the best sounding installations are a
result of adherence to a few basic rules:
• For the most spacious stereo image, place the
left and right speakers as far apart as possible.
• For enhanced center image, place the left and
right speakers so they are equidistant from the
listening position. If possible, try to place them
as far forward as possible.
• For best treble response aim the tweeters
toward the listening position, and be sure there
are no obstructions between the tweeters and
the listener.
INSTALLATION ARNINGS AND IPSW T
• Always wear protective eyewear when using
any tools.
• Turn off all audio systems and other electrical
devices before you start. Disconnect the (–)
negative lead from your vehicle’s battery.
• Keep components in their package until final
installation. When moving a speaker, always
rest it with the cone or dome facing up. Never
use force to install any speaker.
• Check clearances on both sides of a planned
mounting surface before drilling any holes or
installing any screws. Remember that the
screws can extend behind the surface.
• At the installation sites, locate and make a note
of all fuel lines, hydraulic brake lines, vacuum
lines and electrical wiring. Use extreme caution
when cutting or drilling in and around these
areas.
CAUTION: In some cars, fuel tanks may be
located directly beneath the rear deck. Check
for adequate speaker basket clearance before
considering this location!
• Before drilling or cutting holes, use a utility
knife to remove unwanted fabric or vinyl, to
keep material from snagging in a drill bit or
saw.
• For door installations, check the clearance with
the windows throughout the range of the win-
dow’s travel, and verify that a mounted speaker
will not interfere with the window crank or
power window mechanism.
• If mounting components elsewhere, check for
clearance around rear deck torsion bars, glove
box or other structural elements.
• Do not mount components where they will get
wet.
– + MID
REFERENCE STANDARD AUTOMOTIVE
Component System Crossover Network
TO LEFT
MIDRANGE
TO LEFT
TWEETER
TO RIGHT
TWEETER
TO RIGHT
MIDRANGE
+ +++
LO HI– – LO HIMID HI LOMID HI LO
––
TO RIGHT
WOOFER
+
HI LO –
TO LEFT
WOOFER
+
HILO–
FROM LEFT AMPLIFIERSFROM RIGHT AMPLIFIERS
+ –
WOOFER
+ –
MIDRANGE
+ –
EMIT TWEETER
+ – + – + –
EMIT TWEETERMIDRANGEWOOFER
–
+
HI
To RIGHT
Woofer
–
HI +
To LEFT
4" Midrange
– + HI –
To RIGHT
4" Midrange
To LEFT
Tweeter
–
To RIGHT
Tweeter
+ HI
+ MID
– ++ –
+
–
+
–
To LEFT
Woofer
GRN/WHT GRNGRN
LEFT
RIGHT
GRN/BLK
RED BLK BLK RED
BLU
BLU/BLK
BLU
BLU/WHT
GRY/
BLK
GRY
GRY/
WHT
GRYRED
RED/
BLK
RED
RED/
WHT
Connect Pigtail
Jumpers As Shown
Amplifier
W CIRE ODES
Single Stereo Amplifier
Figure 1. This appli-
cation shows
connections for a
Kappa1cs system
and one stereo
amplifier.
- 3 -
– + MID
REFERENCE STANDARD AUTOMOTIVE
Component System Crossover Network
TO LEFT
MIDRANGE
TO LEFT
TWEETER
TO RIGHT
TWEETER
TO RIGHT
MIDRANGE
+ +++
LO HI– – LO HIMID HI LOMID HI LO– –
TO RIGHT
WOOFER
+
HI LO –
TO LEFT
WOOFER
+
HILO–
FROM LEFT AMPLIFIERSFROM RIGHT AMPLIFIERS
+ –
WOOFER
+ –
MIDR ANGE
+ –
EMIT TWEETER
+ – + – + –
EMIT TWEETERMIDR ANGEWOOFER
–
+
HI
To RIGHT
Woofer
–
HI +
To LEFT
4" Midrange
– + HI –
To RIGHT
4" Midrange
To LEFT
Tweeter
–
To RIGHT
Tweeter
+ HI
+ MID
+–
+–
+
–
+
–
LEFT
RIGHT
+
LEFT
RIGHT
To Woofer Amplifier
RIGHT
To Midrange Amplifier
RIGHT
BLU BLU
BLU/WHT
GRY/
BLK
GRY
GRY/
WHT
GRYRED
RED/
BLK
RED
RED/
WHT
Remove Pigtail
–
+
–
+
LEFT
RIGHT
–
+
–
GRN GRN/BLK
GRN/WHT GRN
Amplifier
(Tweeters)
❷
❶
❷
❶
To LEFT
Woofer
BLU/BLK
Amplifier
(Woofers)
Amplifier
(Midrange)
Figure 3. This application shows
connections for a Kappa1cs sys-
tem and three stereo amplifiers.
T IWEETER NSTALLATION
Figure 5. Installing a Kappa 1.1cs/653.1cs midrange driver
in a door panel.
Figure 6. After installing the surface-mount plate, slide the
Kappa1.1cs EMIT-N™ tweeter down on the plate to lock in
place.
RED RED
BLK BLK
– + MID
REFERENCE STANDARD AUTOMOTIVE
Component System Crossover Network
TO LEFT
MIDRANGE
TO LEFT
TWEETER
TO RIGHT
TWEETER
TO RIGHT
MIDRANGE
+ +++
LO HI– – LO HIMID HI LOMID HI LO– –
TO RIGHT
WOOFER
+
HI LO –
TO LEFT
WOOFER
+
HILO–
FROM LEFT AMPLIFIERSFROM RIGHT AMPLIFIERS
+ –
WOOFER
+ –
MIDR ANGE
+ –
EMIT TWEETER
+ – + – + –
EMIT TWEETERMIDR ANGEWOOFER
–
+
HI
To RIGHT
Woofer
–
HI +
To LEFT
4" Midrange
– + HI –
To RIGHT
4" Midrange
To LEFT
Tweeter
–
To RIGHT
Tweeter
+ HI
+ MID
– +
– +
+ –
+ –
+
–
+
–
To LEFT
Woofer
LEFT
RIGHT
+
LEFT
RIGHT
To Woofer Amplifier
RIGHT
BLU
BLU/BLK
BLU
BLU/WHT
GRY/
BLK
GRY
GRY/
WHT
GRYRED
RED/
BLK
RED
RED/
WHT
Connect Pigtail
Jumpers As Shown
–
+
–
Amplifier
(Tweeter & Mids)
GRN GRN/BLK
GRN/WHT GRN
Amplifier
(Woofers)
❶
❶
M IIDRANGE NSTALLATION
Figure 7. After sliding down the flush-mount clip onto the
back of the Kappa1.1cs EMIT-N tweeter, use the supplied
hardware to fasten the cup to the panel.
sacle = 70%
Bi-Amp
Tri-Amp
W IOOFER NSTALLATION
Figure 4. Installing a Kappa1.1cs/653.1cs woofer
above a deck or (with the enclosed spacer) below
a deck.
NOTE: Use the mounting clips as nuts to secure
the below-deck installation.
Figure 2. This application shows
connections for a Kappa1cs sys-
tem and two stereo amplifiers.
Tuotetiedot
| Merkki: | Infinity |
| Kategoria: | Auton kaiutin |
| Malli: | Kappa 1.1cs |
Tarvitsetko apua?
Jos tarvitset apua merkille Infinity Kappa 1.1cs esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Auton kaiutin Infinity Käyttöohjeet
15 Joulukuuta 2024
15 Joulukuuta 2024
15 Joulukuuta 2024
15 Joulukuuta 2024
15 Joulukuuta 2024
15 Joulukuuta 2024
15 Joulukuuta 2024
15 Joulukuuta 2024
15 Joulukuuta 2024
15 Joulukuuta 2024
Auton kaiutin Käyttöohjeet
- Auton kaiutin Pioneer
- Auton kaiutin Kicker
- Auton kaiutin Blaupunkt
- Auton kaiutin Boss
- Auton kaiutin Focal
- Auton kaiutin Mtx Audio
Viimeisimmät Auton kaiutin Käyttöohjeet
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
26 Lokakuuta 2024