Intellinet 509220 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Intellinet 509220 (16 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/16
product warranty
or go to: register.intellinet-network.com/r/509220
Outdoor PoE-Powered 5-Port
2
This guide presents the basic steps to set up and operate this device.
Outdoor PoE-Powered 5-Port Gigabit Switch with PoE Passthrough / 4-Port PoE+ Extender
features one 10/100/1000Mbps PoE-In port and four 10/100/1000Mbps PoE-Out ports.
Rainproof ABS plastic shell for pole installation. Ideal for wireless and surveillance applications.
For the user manual and specifications, visit . intellinet-network.com
Register your product at register.intellinet-network.com/r/509220 or scan the QR code on the cover.
Placement
Prior to use, it is recommended that the switch be placed/positioned:
on a surface that can support the weight of the switch (and
any other items that need to be considered);
with a minimum of 25 mm (approx. 1”) of clearance on
the top and sides for adequate ventilation;
away from sources of electrical noise: radios, transmitters, broadband amplifiers, etc.;
within 100 m (approx. 328’) of network devices (RJ45) it’s to be connected to.
The back side has mounting brackets, which can be used for wall- and pole-mounting
LED
LED Status Operation
PWR On Power is supplied to the switch
Off No power is supplied to the switch
LINK/ACT
On A network link is established
Flashing Data packets are being sent or received
Off A network link is not established
PoE Out (1-4) On Port is supplying power to a connected PoE device.
Off Port is not supplying power to a connected PoE device.
PoE In (5) On Power is supplied to the switch
Off No power is supplied to the switch
English
Instructions
PoE
PoE IN
OUT
PWR
LINK
/ACT
4
5
3
2
1
3English
Connections
Open the bottom cover to connect the ports.
Once connected, secure the cover to guarantee
IP65 waterproof and dustproof protection.
All ports on the switch support Auto-MDI/MDI-X functionality,
so you can use straight or crossover UTP/STP cables to connect
the RJ45 ports to PCs, routers, hubs, other switches, etc.
Cat5e/6/6a/8.x UTP/STP cables provide optimal performance; if a status LED doesnt indicate
a link or activity, check the corresponding device for proper setup and operation.
PSE (power sourcing equipment) ports (1-4) — compliant with IEEE 802.3af/at —
that you can connect to PoE devices such as VoIP phones and network cameras. Any
Ethernet-compatible non-PoE device can also be connected to these 4 ports.
PD (powered device) port (5). When connected to a IEEE 802.3bt/at/af-
compliant PoE injector, midspan or PoE switch, this switch will draw power
from that device; the included power adapter does not need to be used.
This port can also be connected to any standard Ethernet port.
Power
If using this switch as a passthrough power source for PoE devices on Ports 1, 2,3 and
4, the PD port (5) on this switch can receive up to 90 watts of power from a connected
PoE injector or PoE switch less if the connected PoE device isn’t capable of sending
that much power on one port. This switch (509220) will use 5 watts to power itself.
Chassis Ground Column
Located on the connection panel of the switch a grounding terminal connector is used to provide
proper grounding for your switch. It should be wired to an object that provides earth ground.
Instructions
5
134
2

Tuotetiedot

Merkki: Intellinet
Kategoria: Ei luokiteltu
Malli: 509220

Tarvitsetko apua?

Jos tarvitset apua merkille Intellinet 509220 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Intellinet Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet