Luxman PD-171A Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Luxman PD-171A (28 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/28
Owne sr`
Manual
BELT DRIVE ANALOG PLAYER
PD-171A
Contents
Precautions 1 ·············································································································
Features of This Unit 2 ································································································
Before Use 4 ··············································································································
Names and Functions 6 ······························································································
How to Assemble 10 ··································································································
Connections 14 ··········································································································
Operations 16 ·············································································································
How to Replace Tone Arm 17 ·····················································································
Block Diagram 19 ·······································································································
Specifications 20 ········································································································
Before Asking for Repair 21 ························································································
BELT DRIVE ANALOG PLAYER PD-171A
1
Precautions
Installation place
Install this unit in a horizontal and stable place where the
unit is less subject to external vibration.
Do not install this unit near a television or color monitor.
Keep this unit away from such devices as cassette decks
that are subject to magnetism.
Do not move this unit during playback.
Moving this unit during playback may cause the needle jump,
and damage the needle and the record thereby.
When moving this unit
To move this unit, be sure to turn off the power after stopping
the turntable and removing the record. Next, unplug the pow-
er and phono cables, remove the turntable and the turntable
sheet, and move this unit.
Avoid the following locations for installation.
Locations exposed to direct sunlight
Places subject to humidity and with less ventilation
Places where are extremely hot or cold
Places subject to vibration
Places subject to dust
Places subject to oil, steam, and heat (such as kitchens)
Do not put articles.
Do not put any articles on this unit.
To avoid heat emission
Do not place this unit on such device as an amplifier that may
emit heat. If the unit is installed on a rack, install the unit as
distantly as possible from where the amplifier is installed so
as to avoid heat emission from the amplifier and other audio
devices.
Dew condensation
Be aware that condensation may occur when this unit is
moved from a cold place to a warm place especially in win-
ter or when the temperature of the room where this unit is
installed is quickly raised with a heater or the like. It depends
on the condensation state, however, this unit can be used
after water droplets disappear by turning on the power and
leaving the unit as it is for 1 to 2 hours to keep the unit at room
temperature.
Even in summer, dew condensation can occur if this unit is
directly exposed to cool air from an air conditioner. In such
a case, it is recommended to change the installation place.
Lubrication
Do not lubricate this unit yourself because special oil is used
for the spindle.
Cleaning
Usually, wipe the unit with a dry soft cloth.
When the dirt is hard to remove, dip soft cloth in detergent
diluted 5 or 6 times with water, wring it well, and remove
contaminants. Then, remove the moisture with dry cloth.
Be aware that acrylic portions such as dust cover may be
damaged if the portions are rubbed hard.
Be aware that printed or painted portions may be damaged
if the portions come into contact with alcohol, thinner, ben-
zine, insecticide, or the like. In addition, do not let this unit
contact a rubber or plastic form for a long time. That may
damage the cabinet surface of the unit.
When using a chemical cloth for cleaning, read the caution
provided with the chemical cloth product.
Be sure to unplug the power cable from the outlet before
cleaning.
Repair and adjustment
When repairs and adjustments are needed, please ask the
dealer where you bought the unit.

Tuotetiedot

Merkki: Luxman
Kategoria: Ei luokiteltu
Malli: PD-171A

Tarvitsetko apua?

Jos tarvitset apua merkille Luxman PD-171A esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Luxman Käyttöohjeet

Luxman

Luxman CL-1000 Käyttöohje

3 Tammikuuta 2025
Luxman

Luxman CL-38uSE Käyttöohje

3 Tammikuuta 2025
Luxman

Luxman MQ-88uSE Käyttöohje

3 Tammikuuta 2025
Luxman

Luxman MQ-300 Käyttöohje

3 Tammikuuta 2025
Luxman

Luxman SQ-38u Käyttöohje

3 Tammikuuta 2025
Luxman

Luxman LMC-5 Käyttöohje

31 Joulukuuta 2025
Luxman

Luxman PD-171AL Käyttöohje

31 Joulukuuta 2025
Luxman

Luxman D-N100 Käyttöohje

31 Joulukuuta 2025
Luxman

Luxman SQ-N100 Käyttöohje

31 Joulukuuta 2025
Luxman

Luxman PD-191A Käyttöohje

31 Joulukuuta 2025

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet