Miiego CHARGE&PLAY MINI Käyttöohje

Miiego Kuulokkeet CHARGE&PLAY MINI

Lue alta 📖 käyttöohje suomeksi merkille Miiego CHARGE&PLAY MINI (20 sivua) kategoriassa Kuulokkeet. Tämä opas oli hyödyllinen 5 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/20
Quick Start Guide
DK
NOR
ENG 1 - 2
3 - 4
5 - 6
SE 7 - 8
FR
NL
9 - 10
11 - 12
EST 13- 14
DE 15- 17
CHARGE&PLAY MINI
WIRELESS SPEAKER & CHARGER
ENG
SPECIFICATIONS
CARE, MAINTENANCE, SAFETY
1
This device contains a lithium accumulator.
Improper use can cause erheating and fire. ov
Any modification of the product may have consequences for
safety, warranty and proper functioning. Keep out of reach for
children and animals. Product storage and working
temperature: from -10 celsius degrees to +40. Do not expose
the product to direct sunlight, heat or naked flames as it may
cause damage or explosion. Do not use the product if a part is
damaged or defective. Replace a damaged or defective device
immediately. Disconnect the product from the electrical outlet
and other equipment if problems occur. Do not charge when
the product is wet. Do not leave a battery on prolonged charge
when not in use. Do not dismantle, open or shred batteries. Do
not drop the product and avoid bumping. This product may
only be serviced by a qualified technician for maintenance to
reduce the risk of electric shock etc. Product is for indoor use
only and is not a toy. Do not use in severely hot, humid or
corrosive environments. Keep away from magnetic stripe and
chip cards (ID, bank cards etc.). To avoid potential interference,
please keep a distance of 20 cm or more from implantable
medical devices at all times (Pacemakers, cochlear implants,
etc.).
Rechargeable 300 mAh lithium battery. Full charging time:
around 1.5-2.5 hours. Charging input power: 5V DC/2A.
Audio output: 3W. Impedance: 4 .Ω
Wireless Charging
Speaker
Wireless Speaker On/Off
AUX Line in
Charging port
BACKSIDE
ENG
2
Pairing your CHARGE&PLAY MINI wireless speaker
1: Make sure the speaker is charged and turned ON.
2: Activate BT on your phone or other device and search for
new device and select: .CHARGE&PLAY MINI
Please note it may take up to 10 seconds for the speaker to
show up and appear on your list.
The speaker will remember your phone/device and
automatically reconnect the next time you turn it on.
Charging the CHARGE&PLAY MINI
Use a 5V/1A/2A USB adapter for charging.
During charging the red right is on. When fully charged the
red light is off.
Next time charging
When you hear a warning tone every 180 seconds, the
battery status is low and needs charging.
How to use the wireless charging function
The wireless charging function will only work, when it is
connected to power via the included USB-charging cable
(it will not work in battery mode without cable). Please also
note that the wireless charging function will still be working
even when the speaker is OFF.
1. Connect the CHARGE&PLAY MINI to power via the included
charging cable.
2. Place your Qi-enabled phone or device on top of the
CHARGE&PLAY MINI.Please note that removing your
phone’s case/cover may be necessary to ensure
proper wireless charging connection.
3. The small white LED indicator light
inside the speaker will illuminate
constantly when the phone/external
device is charged properly.
4. Remove your phone or device when
it is fully charged.

Tuotetiedot

Merkki: Miiego
Kategoria: Kuulokkeet
Malli: CHARGE&PLAY MINI

Tarvitsetko apua?

Jos tarvitset apua merkille Miiego CHARGE&PLAY MINI esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Kuulokkeet Miiego Käyttöohjeet

Kuulokkeet Käyttöohjeet

Viimeisimmät Kuulokkeet Käyttöohjeet