Netgear GS728TXPv3 Käyttöohje

Netgear Ei luokiteltu GS728TXPv3

Lue alta 📖 käyttöohje suomeksi merkille Netgear GS728TXPv3 (12 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/12
M4500 Intelligent Fully Managed Switches
Model M4500-32C
Model M4500-48XF8C
September 2019
202-12040-02
NETGEAR, Inc.
NETGEAR, Inc.
NETGEAR, Inc.
NETGEAR, Inc. NETGEAR, Inc.
350 E. Plumeria Drive
San Jose, CA 95134, USA
2 NETGEAR M4500 Series Switches Hardware Installation Guide
Support
Thank you for purchasing this NETGEAR product. You can visit
https://www.netgear.com/support/ to register your product, get help, access the latest
downloads and user manuals, and join our community. We recommend that you use only
official NETGEAR support resources.
Compliance and Conformity
For regulatory compliance information including the EU Declaration of Conformity, visit
https://www.netgear.com/about/regulatory/.
See the regulatory compliance document before connecting the power supply.
Do not use this device outdoors. If you connect cables or devices that are outdoors to this
device, see for safety and warranty information.
http://kb.netgear.com/000057103
Trademarks
© NETGEAR, Inc., NETGEAR, and the NETGEAR Logo are trademarks of NETGEAR, Inc. Any
non-NETGEAR trademarks are used for reference purposes only.
Revision History
Publication Part
Number
Publish Date
Comments
202 12040- -02
September 2019
We made minor changes to the information
about the console cables.
202 12040 01- -
September 2019
First publication.
SAFETY INSTRUCTIONS AND WARNINGS
3 NETGEAR M4500 Series Switches Hardware Installation Guide
SAFETY INSTRUCTIONS AND WARNINGS
Use the following safety guidelines to ensure your own personal safety and to help protect
your system from potential damage.
To reduce the risk of bodily injury, electrical shock, fire, and damage to the equipment,
observe the following precautions:
This product is designed for indoor use only in a temperature-controlled and humidity-
controlled environment. For more information, see the environmental specifications in the
appendix or the data sheet.
Any device that is located outdoors and connected to this product must be properly
grounded and surge protected.
Failure to follow these guidelines can result in damage to your NETGEAR product, which
might not be covered by NETGEAR’s warranty, to the extent permissible by applicable
law.
Observe and follow service markings:
Do not service any product except as explained in your system documentation. Some
devices should never be opened.
If applicable to your device, opening or removing covers that are marked with the
triangular symbol with a lightning bolt can expose you to electrical shock. We
recommend that only a trained technician services components inside these
compartments.
If any of the following conditions occur, unplug the product from the electrical outlet and
replace the part or contact your trained service provider:
Depending on your device, the power adapter, power adapter cable, power cable,
extension cable, or plug is damaged.
An object fell into the product.
The product was exposed to water.
The product was dropped or damaged.
The product does not operate correctly when you follow the operating instructions.
Keep your system away from radiators and heat sources. Also, do not block cooling vents.
Do not spill food or liquids on your system components, and never operate the product in
a wet environment. If the system gets wet, see the appropriate section in your
troubleshooting guide, or contact your trained service provider.
Do not push any objects into the openings of your system. Doing so can cause fire or
electric shock by shorting out interior components.
Use the product only with approved equipment.
If applicable to your device, allow the product to cool before removing covers or touching
internal components.
Operate the product only from the type of external power source indicated on the
electrical ratings label. If you are not sure of the type of power source required, consult
your service provider or local power company.
To avoid damaging your system, if your device uses a power supply with a voltage
selector, be sure that the selector is set to match the power at your location:
115V, 60 Hz in most of North and South America and some Far Eastern countries
such as South Korea and Taiwan
100V, 50 Hz in eastern Japan and 100V, 60 Hz in western Japan
230V, 50 Hz in most of Europe, the Middle East, and the Far East

Tuotetiedot

Merkki: Netgear
Kategoria: Ei luokiteltu
Malli: GS728TXPv3

Tarvitsetko apua?

Jos tarvitset apua merkille Netgear GS728TXPv3 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Netgear Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet

Digitus

Digitus DA-90411 Käyttöohje

4 Joulukuuta 2024
Brandson

Brandson 306918 Käyttöohje

4 Joulukuuta 2024
MSI

MSI Force GC20 V2 Käyttöohje

4 Joulukuuta 2024
Hager

Hager LVTG1000CP Käyttöohje

4 Joulukuuta 2024
Hager

Hager RED113X Käyttöohje

4 Joulukuuta 2024
Hager

Hager TYA610A Käyttöohje

4 Joulukuuta 2024
Hager

Hager RED112X Käyttöohje

4 Joulukuuta 2024
Hager

Hager 80161869 Käyttöohje

4 Joulukuuta 2024
Hager

Hager 80162865 Käyttöohje

4 Joulukuuta 2024
Hager

Hager 80161865 Käyttöohje

4 Joulukuuta 2024