PCE Instruments PCE-DPD-C Käyttöohje
PCE Instruments
Mittauslaitteet
PCE-DPD-C
Lue alta 📖 käyttöohje suomeksi merkille PCE Instruments PCE-DPD-C (16 sivua) kategoriassa Mittauslaitteet. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/16
Output and control opons
DIGITAL PANEL METERS
Modular output and control opons for panel meters from series PCE-DPD (except PCE-DPD-U). Relay
outputs, transistor outputs, SSR control outputs, analog outputs, Modbus RTU communicaons, RS-
485 and RS-232 communicaons.
PANEL METERS . OUTPUT AND CONTROL OPTIONS
4908E
www.pce-instruments.com
2
Index
1.1 Read this rst . . . . . . . . . . . . . . . . . . . . . . . . 2
1.2 Modular architecture 2. . . . . . . . . . . . . . . . . . . .
1.3 Installaon and start-up . . . . . . . . . . . . . . . . . . 2
1.4 To open the housing . . . . . . . . . . . . . . . . . . . . 3
1.5 Internal modules . . . . . . . . . . . . . . . . . . . . . . 3
1. Opons R1, T1 and SSR . . . . . . . . . . . . . . . . . . . . 4
2. Opon AO . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
2.1 Conguraon menu . . . . . . . . . . . . . . . . . . . . 6
2.2 Error codes . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. Opon
RTU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.1 Accessible registers. . . . . . . . . . . . . . . . . . . . . 7
3.2 Conguraon menu . . . . . . . . . . . . . . . . . . . . 8
3.3 Excepon codes. . . . . . . . . . . . . . . . . . . . . . . 8
3.4 Compable versions . . . . . . . . . . . . . . . . . . . . 8
3.5 Descripon and example of registers : Series M . . . . . 9
4. Opon
S4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
4.1 Accessible registers. . . . . . . . . . . . . . . . . . . . . 10
4.2 Conguraon menu . . . . . . . . . . . . . . . . . . . . 11
4.3 Compable versions . . . . . . . . . . . . . . . . . . . . 11
4.4 Frame types . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.5 Frame structure. . . . . . . . . . . . . . . . . . . . . . . 12
4.6 Error codes . . . . . . . . . . . . . . . . . . . . . . . . . 12
4.8 Frame examples . . . . . . . . . . . . . . . . . . . . . . 13
4.8.1 Frames ‘RD’ (36) and ‘ANS’ (37) . . . . . . . . . . . . 13
4.8.2 Frames ‘ERR’ (38) . . . . . . . . . . . . . . . . . . . . 13
4.8.3 Frames ‘PING’ (32) and ‘PONG’ (33). . . . . . . . . . 13
4.7 CRC calculaon . . . . . . . . . . . . . . . . . . . . . . . 13
5. Opon
S2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6. Opons R2, R4 and R6 . . . . . . . . . . . . . . . . . . . . . 15
6.1 Conguraon menu . . . . . . . . . . . . . . . . . . . . 15
All modules menoned in this document are compable with digital
panel meters PCE-DPD series (except mulinput panel meter PCE-
DPD-U). Dierent series dier in the number of digits, the digit height
and the number of output and control opons they can accept.
The output and control modules menoned in this document, are
covered by the warranty of the instrument where they are installed.
Check the user’s manual of the instrument for more informaon re-
lated to warranty.
The user’s manual of the instrument where the module is
installed, has important informaon related to installaon
that applies also to the output and control modules men-
oned in this document. Check the user’s manual of the
instrument for more informaon related to installaon precauons.
The output and control modules menoned in this docu-
ment are covered by the ‘CE declaraon of conformity’ of
the instrument where they are installed. Check the user’s
manual of the instrument for more informaon related to
the CE declaraon of conformity.
1.1 Read this rst
Digital panel meters from series M, K and S are designed following a
modular architecture that allows the operator to install any od the
output and control modules menoned in this document.
1.2 Modular architecture
1.3 Installaon and start-up
To install an oponal output and control module into a digital panel
meter from series PCE-DPD:
1. open the housing of the instrument (see secon 1.4)
2. install the module at slot Opt.1’, ‘Opt.2’ or ‘Opt.3’ as preferred and
close the instrument
3. close the housing of the instrument (see secon 1.4)
4. if needed, congure the appropriate jumpers at the module
5. connect the signal output terminals
6. congure the parameters at the ‘Conguraon menu’.
• modules ALr1, T1 and SSR are congured from the alarms menu
of the instrument where the module has been installed
• other modules are congured from its own conguraon menu,
accessible from menu entries ‘Opt.1’, ‘Opt.2’ or ‘Opt.3’, depending
on the slot where the module has been installed.
!
3
PCE Instruments | www.pce-instruments.com
1.4 To open the housing
X
A
C
B D
To open the housing and access the internal circuits, use a at screwdriver to unlock clips ‘D’,
‘C’, ‘B’ and ‘A’, in this order. Remove the front lter. Let the inside of the instrument slide out
of the housing.
To reinsert the instrument make sure that all modules are correctly connected to the pins on
the display module. Place all the set into the housing, assuring that the modules correctly t
into the internal guiding slides of the housing. Once introduced, place again the front lter at
cover ‘X’, and then insert clips ‘A’, ‘B’, ‘C’ and ‘D’, in this order.
1.5 Internal modules
Risk of electric shock. Removing the front cover will grant access to the internal
circuits. Disconnect the power and the input signal to prevent electric shock to the
operator. Operaon must be performed by qualied personnel only.
Output and control modules
Opt.3
Opt.2
Opt.1
Signal module
Power module
Observe precauons for handling ESD (electrostac dis-
charge) sensive devices
Power
Opt.2
Opt.1
Opt.3
A B C
A B C
Signal
A B C
rear view
Tuotetiedot
| Merkki: | PCE Instruments |
| Kategoria: | Mittauslaitteet |
| Malli: | PCE-DPD-C |
Tarvitsetko apua?
Jos tarvitset apua merkille PCE Instruments PCE-DPD-C esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Mittauslaitteet PCE Instruments Käyttöohjeet
24 Lokakuuta 2024
23 Lokakuuta 2024
23 Lokakuuta 2024
23 Lokakuuta 2024
23 Lokakuuta 2024
23 Lokakuuta 2024
23 Lokakuuta 2024
23 Lokakuuta 2024
23 Lokakuuta 2024
23 Lokakuuta 2024
Mittauslaitteet Käyttöohjeet
- Mittauslaitteet Kogan
- Mittauslaitteet PeakTech
- Mittauslaitteet Clean Air Optima
- Mittauslaitteet CSL
- Mittauslaitteet Kern
- Mittauslaitteet Einhell
- Mittauslaitteet Reely
- Mittauslaitteet Joy-it
- Mittauslaitteet Basetech
- Mittauslaitteet Gossen Metrawatt
- Mittauslaitteet TFA
- Mittauslaitteet Extech
- Mittauslaitteet Sonel
- Mittauslaitteet Flir
- Mittauslaitteet Testo
Viimeisimmät Mittauslaitteet Käyttöohjeet
27 Lokakuuta 2024
26 Lokakuuta 2024
25 Lokakuuta 2024
25 Lokakuuta 2024
24 Lokakuuta 2024
22 Lokakuuta 2024
22 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024