Pioneer CA-HM-FIA-PSA.001 Käyttöohje

Pioneer Ei luokiteltu CA-HM-FIA-PSA.001

Lue alta 📖 käyttöohje suomeksi merkille Pioneer CA-HM-FIA-PSA.001 (4 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/4
3
2
1
Double DIN Set contents
• (1) Facia Plate
• (2) Metal Frame • (3) Mounting Accessories
© 12/2008 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
Compatible with these double DIN devices
Pioneer Navigation
Installation Manual
Double DIN Kit
CA-HM-FIA-PSA.001
• Citroën Nemo 2008->
• Fiat Fiorino 2008->
• Peugeot Bipper 2008->
Mount the metal brackets to the
double DIN head unit.
The position of the copper
coloured holder can be adjusted
to your needs for perfect t.
(see sample)
(sample photo) (sample photo)
8. Connect all required circuit points
and push the double DIN head
unit in the metal frame until it
snaps in
9. Place facia plate
Installation Manual Double DIN Kit
4. Remove 2 screws below
document holder
1. Remove OEM Radio with special
radio release keys
2. Remove original clamps from
upper OEM-cover
Info: Attach original clamps from
upper OEM-cover to facia plate (see arrows)
3. Remove 2 screws (see arrows)
5. Cut out dash board plastic
by using a sharp knife
6. Note: Cutting needs to be
done properly for a
seamless installation of the
double DIN head unit
7. Place metal frame
x metal frame with
4 screws

Tuotetiedot

Merkki: Pioneer
Kategoria: Ei luokiteltu
Malli: CA-HM-FIA-PSA.001

Tarvitsetko apua?

Jos tarvitset apua merkille Pioneer CA-HM-FIA-PSA.001 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Pioneer Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet