Pioneer CA-IW-SUB.003V Käyttöohje

Pioneer Ei luokiteltu CA-IW-SUB.003V

Lue alta 📖 käyttöohje suomeksi merkille Pioneer CA-IW-SUB.003V (4 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/4
OUTBACK 2015->
2-USB and Jack 3,5mm replacement PCB
All installation work must be performed by a quali ed professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
05/2015 ALL RIGHTS RESERVED. Technical changes possible. No liability for misprints.
SUBARU
Use the screw saved before to
x the PCB to the tan cover.
Connect the cables on the radio
side: the USB-1 marked on the
label of the harness matches
with the upper USB on the front
panel; the USB-2 is the lower
usb.
CA-IW-SUB.003V
All installation work must be performed by a quali ed professional installer only.
The manufacturer / dealer is not liable for any kind of incidental or indirect damages.
Take out the original AUX/USB,
circled in the image, under
the clima controls.
Unscrew and save the black
screw shown in the picture.
Before insert the circuit, put the
harness through the holes of the
plastic tan cover as show in the
picture; plug the connectors to
the PCB.
Installation Manual
Slide out the original circuit.
Carefully remove and save the
black cover with a
screwdriver.
Slide the PCB into the tan plastic
cover and remount the black
plastic cover.

Tuotetiedot

Merkki: Pioneer
Kategoria: Ei luokiteltu
Malli: CA-IW-SUB.003V

Tarvitsetko apua?

Jos tarvitset apua merkille Pioneer CA-IW-SUB.003V esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Pioneer Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet