Proaim P-CTST-01 Käyttöohje

Proaim Kolmijalka P-CTST-01

Lue alta 📖 käyttöohje suomeksi merkille Proaim P-CTST-01 (5 sivua) kategoriassa Kolmijalka. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/5
What s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
A s s e m bl y M a n ua l
Cam Tower Stand w/ Counterbalance
Accessory Tray
Plaorm Secon 2 with Locking Pivot Wheels-
Plaorm Secon 1 with -
Locking Pivot Wheel
Camera Support Plaorm
Cam Tower Stand w Counterbalance
(P CTST- -01)
2 x Screws 1x Spanner (Size: 17mm)-
2x Allen Keys T Type -
(Size: 3/16 4mm)-”&
2
Loose all the screws of platform selection-1
as shown in image.
Cam Tower Stand Setup
Now all screw has been removed as you can
see in the image.
Use removed screw to secure the platforms
together and tighten it by spanner.
Now attach platform selection with platform -
selection-1.
Plaorm Secon 2 with Locking Pivot Wheels-
Plaorm Secon 1 with Locking Pivot Wheel -
Now stand the platform on its wheel.
3
Now mount tower stand on platform rod.
Cam Tower Stand w Counterbalance
Secure the tower stand with the help of
provided Allen key (Size:3/16”).
Aach supporter plaorm to counter
balanced column of cam tower stand.
Screw it with the help of Allen key (Size:4mm).
Remove screws from the boom of counter
balanced column.
Camera Support Plaorm

Tuotetiedot

Merkki: Proaim
Kategoria: Kolmijalka
Malli: P-CTST-01

Tarvitsetko apua?

Jos tarvitset apua merkille Proaim P-CTST-01 esitä kysymys alla ja muut käyttäjät vastaavat sinulle