Proaim P-HDRP-01 Käyttöohje

Proaim Kolmijalka P-HDRP-01

Lue alta 📖 käyttöohje suomeksi merkille Proaim P-HDRP-01 (5 sivua) kategoriassa Kolmijalka. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/5
1
Whats In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed
below.
Car Seat Headrest Plus Bracket (P HDRP )- -01
A s s e m b l y Ma n u a l
All rights reserved.
No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,
electronic, mechanical, photo copying, recording, or otherwise, except as may be expressly permied by the applicable copyright -
statutes or in wring by the Publisher.
1 x L Type Allen Key (Size: 5mm)-
Proaim Headrest Plus Bracket
2
Feature Of Car Seat Headrest Plus Bracket
Loosen the bolts of the headrest car mount
using the 5mm Allen key. Now, loosen the
clamp aached at the boom of the Headrest
Car Mount .
To remove the Headrest, push the seat's
buon as shown in the image.
Car Seat Headrest Bracket Setup
3
Mount the desired accessory in the Bracket
and posion it per your requirement.
NOTE: The arm has two highlyexible joints
with lng adjustments for your monitor or
accessory at the perfect angle for opmal
viewing comfort.
Insert the Headrest Rod in the Headrest Plus
Bracket, as shown in the image.
Then, re insert the assembly headrest in the -
vehicle's seat.
Aer properly inserng the assembly headrest
into the vehicle's seat, secure all the bolts of
the Headrest Plus Bracket by re ghtening -
them, as shown in the image.
Now, loosen the rachet knob and set the
posion of the Bracket, per your
requirement.

Tuotetiedot

Merkki: Proaim
Kategoria: Kolmijalka
Malli: P-HDRP-01

Tarvitsetko apua?

Jos tarvitset apua merkille Proaim P-HDRP-01 esitä kysymys alla ja muut käyttäjät vastaavat sinulle