Radial Engineering Gold Digger Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Radial Engineering Gold Digger (8 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 5 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/8
True to the Music
www.radialeng.com
®
True to the Music
®
User Guide
www.radialeng.com
Radial Engineering Ltd.
1845 Kingsway Ave., Port Coquitlam, BC V3C 1S9, Canada
tel: 604-942-1001 • fax: 604-942-1010
email: info@radialeng.com
Gold Digger
4x1 Microphone Selector
Radial® Gold Digger
Microphone Selector
Table of Contents Page ......................................................
Overview 1 ........................................................................
Feature Set 2 ....................................................................
Making Connections 3 .......................................................
Setting Trim Levels ......................................................... 4
When To Use .................................................................. 4
Specications ................................................................. 5
Warranty Back cover ............................................................
www.radialeng.com
INTRODUCTION
Thank you for purchasing the Radial Gold Digger. We are very excited about how this product
can improve workow and efciencies in the studio. We are also very condent that once
you get it in use, you too will nd it to save you time and bring another level of creativity to
your production.
Although the Gold Digger is extremely easy to use, it is well advised that you take a few
minutes to quickly read through this short manual. Inside, you will surely nd some hints on
how to best approach using the Gold Digger in your studio. If you do not nd everything you
need, please go to the Gold Digger web pages on our site and visit the FAQ section. This is
where we publish the latest updates and answer questions from users.
Radial Engineering Ltd. Gold Digger™ Microphone Selector
True to the Music
®
OVERVIEW
The Gold Digger is a 4-in, 1-out switcher designed specically for microphones. Although this
may seem simple from the outside, there are a number of concerns that were addressed to
make it work easily, quickly and without noise. This includes switching ‘powered microphones
such as condensers without creating huge pops that can blow tweeters. Another concern is
keeping old vintage ribbon mics safe. We wanted to make it easy to set up a fair comparison.
This meant that the Gold Digger could not impart any form of coloration or distortion to
the signal path, but we also had to have some type of level control to ensure the tests are
conducted fair and square so that one mic would not be louder than the next.
Ultimately, you will nd the Gold Digger to be super easy to use and will save you time as you
nd the best mic to suit a certain application. Have fun. Experiment. This is what the Gold
Digger is designed to do.
DA N RFACEW I TE
MI HON R MPCROP E P EA
MIC 1 MIC 2 MIC 3 MIC 4
1 2 3 4
Typical Setup Diagram
1

Tuotetiedot

Merkki: Radial Engineering
Kategoria: Ei luokiteltu
Malli: Gold Digger

Tarvitsetko apua?

Jos tarvitset apua merkille Radial Engineering Gold Digger esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Radial Engineering Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet