Radial Engineering Workhorse Shuttle Käyttöohje

Radial Engineering Ei luokiteltu Workhorse Shuttle

Lue alta 📖 käyttöohje suomeksi merkille Radial Engineering Workhorse Shuttle (12 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/12
True to the Music
www.radialeng.com
®
True to the Music
®
User Guide
Shuttle 500
Insert and Routing
500 Series Module
www.radialeng.com
Radial Engineering Ltd.
1588 Kebet Way, Port Coquitlam
British Columbia, Canada, V3C 5M5
tel: 604-942-1001 • fax: 604-942-1010
email: info@radialeng.com
Radial Engineering Ltd. Shuttle™ 500 Module
True to the Music
®
Radial® Shuttle 500 User Guide
Table of Contents ......................................................Page
Feature Set .................................................................... 1
Overview ........................................................................ 2
Getting Started ............................................................... 3
Using the Loops ............................................................. 4
Omniport ........................................................................ 6
Patching External Sources ............................................. 8
Specifi cations ................................................................. 9
Block Diagram ................................................................ 9
Warranty ........................................................... Back cover
Congratulations and thank you for your purchase of the Radial Shuttle 500 module. The
Shuttle is a simple yet highly effective tool that will help you effi ciently route signals in and
out of your Workhorse or 500 series rack. In fact, it is probably one of those devices that you
will soon come to say: “I wonder how I could have lived without it?”
To help you get there, we have written this short manual. Please take a few minutes to read
it through so that you can take full advantage of the features that are built in. Hopefully,
we have addressed all of your concerns. If however you do not nd all of the answers and
wisdom as you drop your bucket into the deep well of recording knowledge, visit the FAQ
page on our web site. This is where we post questions from users like you along with helpful
hints. If you do not nd what you are looking for, then send us an email at info@radialeng.
com. We will do our very best to answer your question in short order.
Get ready to plug in, out and in between!
True to the Music
®
Radial Engineering Ltd. Shuttle™ 500 Module
1
4
3
2
6
5
Rear Panel
1
FEATURE SET
1. LOOP-1 INSERT SWITCH: Inserts the
balanced loop into the signal path to
compare pre and post signals. Works with
all 500 series modules and racks.
2. LOOP-1 SEND & RECEIVE JACKS: Line-
level +4dB loop connects to pro-audio
processors with separate balanced send
and receive TRS jacks. Works with all 500
series modules and racks.
3. OMNIPORT INSERT LOOP SWITCH:
Inserts the Omniport loop into the signal
path to compare pre and post signals.
Available when used with the Radial
Workhorse.
4. LOOP-2 INSERT SWITCH: Inserts the
unbalanced loop into the signal path to
compare pre and post signals. Available
when used with the Radial Workhorse.
5. LOOP-2 SEND & RECEIVE JACKS: Line-
level -10dB loop connects to unbalanced
devices with separate 1/4” phone jacks.
Available when used with the Radial
Workhorse.
6. OMNIPORT (Workhorse): TRS type
unbalanced insert jack con gured TIP=
SEND; RING=RETURN. Available when
used with the Radial Workhorse.

Tuotetiedot

Merkki: Radial Engineering
Kategoria: Ei luokiteltu
Malli: Workhorse Shuttle

Tarvitsetko apua?

Jos tarvitset apua merkille Radial Engineering Workhorse Shuttle esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Radial Engineering Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet