StarTech.com RKPW081915 Käyttöohje

StarTech.com Ei luokiteltu RKPW081915

Lue alta 📖 käyttöohje suomeksi merkille StarTech.com RKPW081915 (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Lataa PDF

Sivu 1/2

Instruction Manual

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

Manual Revision: 08/13/2020

For the most up-to-date information, please visit: www.startech.com

RKPW081915

8 Outlet PDU Power Distribution Unit 125V 15A (12A UL)

*actual product may vary from photos

Packaging Contents

• RKPW081915 Power Distribution Unit

• Installation Guide

System Requirements

• 19” front/rear mounting rack/cabinet (EIA 310-D compliant)

• 125VAC power source

Specications

Number of Power Outlets 8

Connectors 8 x NEMA 5-15 female

Electrical Rating 125VAC / 15A

LEDs 1 x Ground (green)

1 x Surge (red)

Operating Temperature -5oC to 45oC (23oF to 113oF)

Storage Temperature -25oC to 65oC (-13oF to 149oF)

Dimensions 482.6mm x 95.5mm x 42.7mm

Weight 2016g

Installation

1. The power distribution unit takes up 1U of rack space, so locate an

appropriate location on the rack and mount it against the front or

rear mounting posts.

2. Using the mounting hardware (screws, nuts, etc.) provided with

your rack or from your rack manufacturer, secure the unit to the

posts.

3. Connect the power cable from the distribution unit to a 125VAC

power source.

Note: It is recommended that the unit be connected directly to a

main source and not another distribution unit.

4. Toggle the “Reset” switch on the front of the unit to the ‘on’

position to energize the unit.

5. The “Surge” LED should light up to indicate surge protection

is active. The “Ground” LED should light up to indicate proper

grounding is present.

Note: If the “SURGE” LED indicator is o, the surge protection circuit

is compromised. Power cycle the power strip by toggling the power

switch to the “OFF” position and back to the “ON” position. If a

power cycle does not remedy the issue, it is likely the power strip has

absorbed a power surge. Please contact your authorized

StarTech.com reseller to purchase a replacement, or StarTech.com if

you require additional support.

6. You may now attach your 125VAC compatible devices to the

distribution unit.

Note: Combined power draw from all devices should not exceed

15A, otherwise the built-in circuit breaker will trip.

7. In the event of an overload scenario, the built-in circuit breaker

will be tripped and power to all outlets will be stopped.

8. Disconnect the problem device or all devices from the distribution

unit and toggle the “Reset” switch to turn the ports back on.

Front View

Rear View

Reset switchGround LEDSurge LED

NEMA 5-15 outlets

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-party companies not related in any way to

StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s)

to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby acknowledges that all

trademarks, registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related documents are the property of their respective holders.

Technical Support

StarTech.com’s lifetime technical support is an integral part of our commitment to provide industry-leading solutions. If you ever need help with your product, visit www.startech.com/support and access

our comprehensive selection of online tools, documentation, and downloads.

For the latest drivers/software, please visit www.startech.com/downloads

Warranty Information

This product is backed by a two year warranty.

In addition, StarTech.com warrants its products against defects in materials and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned

for repair, or replacement with equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising from

misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental,

consequential, or otherwise), loss of prots, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product. Some states do not allow

the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations or exclusions contained in this statement may not apply to you.