Summit BKRF18W Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Summit BKRF18W (4 sivua) kategoriassa Jääkaappi. Tämä opas oli hyödyllinen 5 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/4
R1-041916 Page 1 of 4
Felix Storch, Inc. │ Bronx, NY 10474│ Tel: (718) 893 3900│ Fax: (844) 478 8799
TRACEABLE THERMOMETER/ALARM USER MANUAL
-3 AL
Features
Thermometer simultaneously displays minimum, maximum and current temperatures
The unit will provide a visual and audio alert when temperature rises above or falls below the
high and low set points
The min/max feature is designed to monitor and store the highest and lowest readings until the
memory is cleared
The temperature sensor is enclosed in a glycol-lled bottle, protecting it from rapid temperature
changes when refrigerator/freezer door is opened
Low battery alert function ( battery symbol ashes)
Measuring temperature range -30 ~ 70 oC ( or -22 158 ~ oF)
Accuracy : ± 0.5 oC (-10 ~ 10 oC or 14 ~ 50 oF), in other ranges ± 1 oC ( or ± 2 oF)
Sampling rate of 10 seconds
Powered by a durable AAA lithium battery
SAVE THIS MANUAL FOR FUTURE REFERENCE
R1-041916 Page 2 of 4
Package Contents
Display unit
Temperature sensor in a glycol-lled bottle
Instruction manual
Calibration certicate
Lithium battery
*Remove the protective lm that is applied to the LCD screen prior to using this product.
Parts and Controls/Features
Press the MODE/RESET button ONCE to reset Min/Max temperature record.
To display on the main screen:
Press ONCE to display high alarm temperature setting.
Press TWICE to display low alarm temperature setting.
Press THREE TIMES display current temperature to
reading.
Press change the temperature display scale from Fahrenheit to
(oF) to Celsius (oC) or Celsius to Fahrenheit
*Press any key to turn o the alarm beeping sound.
Set Up
Battery Installation: Remove battery compartment cover located on the rear of the unit and remove
insulation strip from battery compartment. Following the polarity (+/-) diagram in the battery
compartment, install the battery. Replace the battery cover The unit will beep and all segments of .
the LCD will be activated.
Main display screen
R1-041916 Page 3 of 4
Operation
Programming the Alarms
To reset high alarm temperature setting and low alarm temperature setting, follow
instructions below.
High Alarm Temperature
Setting
Low Alarm Temperature
Setting
To Use
Once the Alarm Thermometer has been programmed, place the temperature sensor (in glycol bottle) in
the location to be monitored, such as inside a refrigerator or freezer.
Thermometer displays internal temperature of unit being monitored, as well as maximum and
minimum temperatures reached. The thermometer maximum and minimum readings reect the
highest and lowest temperatures since the battery w inserted or since the RESET button was last as
pressed.
If the temperature measurement rises above or falls below the set temperature r ge, the an alarm will
sound. To silence the alarm, press any button.
Set the high and low alarm temperature limits above and below the refrigerator/freezer operating
temperature to prevent false alarms. Refrigerators are designed to run between 2-8 ° (36-46° while
C F)
freezers run below -15 ° (5 ° C F).

Tuotetiedot

Merkki: Summit
Kategoria: Jääkaappi
Malli: BKRF18W

Tarvitsetko apua?

Jos tarvitset apua merkille Summit BKRF18W esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Jääkaappi Summit Käyttöohjeet

Jääkaappi Käyttöohjeet

Viimeisimmät Jääkaappi Käyttöohjeet