TCL TAC-12CHSD/TPG11I Käyttöohje

TCL Ilmastointi TAC-12CHSD/TPG11I

Lue alta 📖 käyttöohje suomeksi merkille TCL TAC-12CHSD/TPG11I (39 sivua) kategoriassa Ilmastointi. Tämä opas oli hyödyllinen 10 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Lataa PDF

Sivu 1/39

CONTENTS

NAMES OF PARTS

INDOOR UNIT DISPLAY

OPERATING INSTRUCTIONS

INSTALLATION MANUAL

MAINTENANCE

TROUBLESHOOTING

EMERGENCY FUNCTION & AUTO-RESTART FUNCTION

REMOTE CONTROLLER

................................................................................................................4

.......................................................................................................5

.............................................6

.......................................................................................................7

.............................................................................................11

....................................................................................................20

....................................................................................................................35

..........................................................................................................36

..................................................................................................1

SAFETY PRECAUTIONS

SAFETY RULES AND RECOMMENDATIONS FOR THE USER

Cleaning and maintenance must be carried out

by specialized technical personnel. In any case

disconnect the appliance from the mains

electricity supply before carrying out any

cleaning or maintenance.

If the appliance gives off smoke or there is a

smell of burning, immediately cut off the pow

er supply and contact the Service Centre.

Have repairs carried out only by an authorised

Service Centre of the manufacturer . Incorrect

repair could expose the user to the risk of

electric shock, etc.

This appliance has been made for air

conditioning domestic environments and must

not be used for any other purpose.

The batteries in remote controller must be

recycled or disposed of properly.

Unhook the automatic switch if you foresee

not to use the device for a long time.

The airflow direction must be properly adjusted

SAFETY RULES AND PROHIBITIONS

Do not obstruct the air inlet or outlet of the

indoor or the outdoor unit.

The obstruction of these openings causes a

reduction in the operative efficiency of the

conditioner with possible consequent failures

or damages.

This appliance is not intended for use by

persons (including children ) with reduced

physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they

have been given supervision or instruction

concerning use of the appliance by a person

responsible for their safety.

Children should be supervised to ensure

that they do not play with the appliance.

If the supply cord is damaged, it must be

replaced by the manufacturer,its service

agent or similarly qualified persons in

order to avoid a hazard.

NAMES OF PARTS

Air filter

Air deflector and flap

Emergency button

Front panel

Air inlet

Air outlet

Indoor unit

Outdoor unit

Note: This figure shown may be different from the actual

object. Please take the latter as the standard.

Mounting plate

Air outlet

Air inlet

Drainage pipe

Wiring cover

Connection wiring

Valve protective cover

With the protective

cover removed

Liquid valve

(High pressure valve)

Gas valve

(Low pressure valve)

Refrigerant

connection pipe

Remote controller

INDOOR UNIT DISPLAY

The shape and position of switches and indicators may be different according to the model, but their

function is the same.

No.

Led Function

Temperature display (if present)

/Error code

(1) Lights up during Timer operation when

the air conditioner is operational

(2)Displays the malfunction code when

fault occurs.

SLEEP mode

Lights up during Timer operation.

SLEEP

TIMER

EMERGENCY FUNCTION & AUTO-RESTART FUNCTION

The shape and position of the emergency button

may be different according to the model, but their

function is the same.

Emergency

button

The emergency button is located on E-box cover

of the unit under the front panel.

front panel

Open and lift the front panel up to an angle to reach

the emergency button.

If the remote controller fails to work or maintenance

necessary, proceed as following:

The appliance is preset with an auto-restart function.

In case of a sudden power failure, the module will

memorizes the setting conditions before the power

failure. When the power restores, the unit will restart

automatically with the previous settings preserved

by the memory function.

For heating model, press the emergency button first

and the unit will operate in COOL mode. Press for a

second time within 3 seconds, and unit will operate in

HEAT mode. Press for third after 5 seconds, the unit

will turn off.

For cooling only models, press the emergency button

once, and the unit will operate in COOL mode. Press

again, the unit will turn off.

REMOTE CONTROLLER

For ON/OFF models For inverter models

REMOTE CONTROLLER

The shape and position of buttons and indicators may vary according to the model, but their function is the same.

The display and some functions of the remote control may vary according to the model.

The unit confirms the correct reception of each button with a beep.

To turn on/off the air conditioner

MODE

TURBO

(TEMP DN)

(TEMP UP)

FAN

No.

To activate the function of Child Lock, press and buttons

together for more than 3 seconds.

( + )

To decrease the setting temperature, reduce the time in TIMER setting.

To select the operation mode: AUTO, COOL, DRY, FAN, HEAT.

To switch on/off the TURBO mode

To adjust the fan speed: auto, mute, low, mid-low, mid, mid-hign, high. Turbo

To adjust the air flow direction vertically(optional).

To increase the setting temperature, lengthen the time in TIMER setting.

GENTLE WIND To activate the function of Gentle wind.

To adjust the air flow direction horizontally.

I FEEL To activate the function of I FEEL

To switch on/off the GENERATOR mode

TIMER/SLEEP To switch on/off the TIMER function and SLEEP mode

ECO/DISPLAY

To switch on/off the HEALTH function and Auto Clean function..

HEALTH/CLEAN

To switch on/off the ECO mode and LED display light

TIMER/SLEEP + ECO/DISPLAY

ECO/DISPLAY + HEALTH/CLEAN

To switch on/off the CHILL WIND and HOT WIND fucntion.

I SET To activate the function of I SET

Remote controller buttons

Buttons Function

Certain functions may not be available for your air conditioner.

The batteries in remote controller must be recycled or disposed of properly.

REMOTE CONTROLLER

Remote controller DISPLAY, meaning of symbols on the liquid crystal display

AUTO MODE indicator

COOLING MODE indicator

DRY MODE indicator

FAN MODE indicator

HEATING MODE indicator

TIMER indicator

AUTO FAN indicator

FAN SPEED indicator

SLEEP MODE indicator

FLAP SWING (Air flow) indicator

TURBO indicator

HEALTHY indicator

ECO indicator

Meaning

No. Symbols

TEMPERATURE/ CLOCK indicator

BATTERY indicator

I FEEL indicator

MUTE indicator

(FLASH)

8 C heating function indicator

GENERATOR MODE indicator

GENTLE WIND indicator

CHILL WIND indicator

HOT WIND indicator

DISPLAY LIGHT indicator

CLEAN function indicator

CHILD LOCK indicator

Replacement of Batteries

Remove the battery cover plate from the rear of the remote controller,

by sliding it in the direction of the arrow.

Install the batteries according the direction (+and -)shown on the Remote

Controller.

Reinstall the battery cover by sliding it into place.

Use 2 LRO 3 AAA (1.5V) batteries . Do not use rechargeable

batteries . Replace the old batteries with new ones of the same

type when the display is no longer legible.

Do not dispose batteries as unsorted municipal waste. Collection

of such waste separately for special treatment is necessary.

Recommendations for locating and using the remote controller holder (if present).

The remote controller be kept in a wall-mounted holder.

OPERATING INSTRUCTIONS

Filter

Heat

Fan

Exchanger

The direction of the air outlet is motorized up and down

by flaps, and manually moved right and left by the vertical

deflectors, for some models, the vertical deflectors could be

controlled by motor as well.

The air sucked by the fan enters from the grill and

passes through the filter, then it is cooled/dehumidified

or heated through the heat exchanger.

Fan

Turn ON / Turn OFF the air conditioner

Press the button to turn on or turn off the air conditioner.

COOLING MODE

The cooling function allows the air condit-

ioner to cool the room and at the same time

reduces Air humidity.

To activate the cooling function ( COOL ) , press the

MODE button until the symbol appears on

the display.

With the button or set a temperature lower than

that of the room.

OPERATING INSTRUCTIONS

Horizontal Flaps

flap

movement Vertical Deflectors

AIR FLOW CONTROL

Flaps manually, the delicate

mech-anism might seriously damaged!

Never poke fingers, sticks or other objects in the

air inlet or outlet vents. Such accidental contact

with liveparts might cause unforeseeable damage

or injury.

This adjustment must be done while the

appliance is switched off.

1. Normal 4 way air flow (vertical and horizontal):

(1) Press to activate the horizontal flaps to

swing from up to down. Press again to stop the swing

movement at the current angle.

(2) Press to active the vertical deflectors to

swing from left to right. Press again to stop the swing

movement at the current angle.

2. Vector precise air flow

(1)Press and hold for 1s, it will go into the horizontal

vector air flow, you can select a small swing angle you

want:

Stop selection for 5s, press again, exit the horizontal vector precise air flow.

(2) Press and hold for 1s, it will go into the vertical

vector air flow:

Stop selection for 5s, press again, exit the vertical vector precise air flow.

3. If the vertical deflectors are positioned manually whichplaced under the flaps, they are allowed to move

the air flow direct to rightward or leftward.

Change the fan speed

Press FAN button to set the running fan speed, it can

be set to AUTO/ MUTE/ LOW/ MID-LOW/ MID/ MID-HI/

HIGH/TURBO speed.

Flashing

OPERATING INSTRUCTIONS

GENTLE WIND (Optinal)

In this mode the appliance will close its

vertical louvers, the air flow through the holes

of louvers, the room is cool but no winds.

Press the GENTLE WIND button shortly, the appears on

the display, and the appliance will run in GENTLE WIND mode.

Press again to cancel it..

NOTE:

The gentle wind function is available in COOLING mode only.

I FEEL function

I FEEL

Press I FEEL button to active the function, the

will appear on the remote display.

Do it again to deactivate this function.

This function enables the remote control to measure

the temperature at its current location, and send this

signal to the air conditioner to optimize the temperature

around you and ensure the comfort.

It will automatically deactivate 2 hours later.

Turbo function

To activate turbo function, press the TURBO button,

and will appear on the display.

In COOL/HEAT mode, when you select TURBO

feature, the appliance will operate the fast cooling/

fast heating with the highest fan speed.

Press again to cancel this function.

OPERATING INSTRUCTIONS

SLEEP MODE

Pre-setting automatic operating program.

After 10 hours running in sleep mode, the air conditioner

will change to the previous setting mode.

Press SLEEP button and hold for 2s to activate the sleep

mode, and appears on the display.

Press and hold for 2s again to cancel this mode.

In sleep mode, the air conditioner will automatically adjust

the temperature and fan speed to make the room more

comfortable during the night.

The air conditioner works in generator mode,

it is helpful for the unstable net power area.

To activate GEN function,pressing the button GEN and

the unit current level will cycle as below

OFF L3 L2 L1

To cancel this function,press the GEN until code OF

appers on the display.

Through GEN mode,you can choose the current level of

the unit.There are three levels (L1,L2,L3) in this mode,

and the current increases in turn.

GENERATOR MODE (Optional)

Running current (% of rated current):

L1: 30%, L2: 50%, L3:70%

ECO MODE

In this mode the appliance automatically

sets the operation to save energy.

Press the ECO button, the appears on the

display, and the appliance will run in ECO mode.

Press again to cancel it..

NOTE:

The ECO function is available in both COOLING and

HEATING modes.

OPERATING INSTRUCTIONS

LED display light ON/OFF

Press DISPLAY button and hold for 2s to turn on/off

the indoor LED display light.

HEALTH function (Optional)

Press HEALTH button to active / exit the health functions

such as ion generator/ plasma etc

Note: Health function is not available when the air conditioner

is off.

1. This function help carry away the accumulated

dirt, bacteria, etc from the evaporator.

2. Turn off the air conditioner, press "CLEAN" button to enter

this function and it will show "CL" on the display of indoor unit.

3. This function will run about 30 minutes, and it will exit

automatically. You will hear 2 beeps when it's finished or

cancelled.

4. It's normal if there are some noise during this function

process, as plastic materials expand with heat and

contract with cold.

5.We suggest operate this function as the following ambient

condition to avoid certain safety protection features.

6. We suggest operate this function once every 3 months.

Indoor unit

Outdoor unit

Temp<30

5 <Temp<30

SELF-CLEAN function (Optional)

OPERATING INSTRUCTIONS

TIMER MODE----SET TIMER OFF

TIMER

To set the air conditioner switching-off

automatically.

With the AC off, press the Timer button and use the

and buttons to set the desired amount of time before the

AC turns on. Press the timer button again to start the countdown.

When the timer setting was done, you can set the operation mode,

fan speed, desired temperature, air flow when air conditioner star

to run.

Note:To cancel , press the TIMER

button again.

the set function

Note:In case of power off,it is necessary to set TIMER

OFF again

TIMER MODE----SET TIMER ON

TIMER

Note: To cancel the timer function ,press the TIMER

button again.

Note: In case of power off, it is necessary to set TIMER

ON again

With the AC on, press the Timer button and then use the

and buttons to set the length of time before the AC

will turn off. Press the timer button again to start the

countdown.

To set the air conditioner switching-on

automatically.

The air conditioner is programmed for comfortable and suitable living conditions as below

if used outside the conditions, certain safety protection features might come into effect.,

OPERATING INSTRUCTIONS

Operating Temperature

Fix air conditioner:

MODE

Temperature

Room temperature

Outdoor

temperature

Cooling operating Heating operating Drying operating

17 ~32 0 ~27 17 ~32

15 ~43

For T1 Climate

15 ~52

For T3 Climate

-7 ~24

Inverter air conditioner:

MODE

Temperature

Room temperature

Outdoor

temperature

Cooling operating Heating operating Drying operating

17 ~32 0 ~30 17 ~32

15 ~53

-15 ~53

For models with low

temperature cooling

system

-20 ~30

The unit does not operate immediately if it is turned on after being turned off or after changing

the mode during operation.This is a normal self-protection 3

minutes.

action, you need to wait for about

The capacity and efficiency are according to the test conducted at full-load operation(The

highest speed of indoor fan motor and the maximum open angle of the flaps and deflectors

are requested.)

15 ~43

For T1 Climate

15 ~52

For T3 Climate

15 ~53

-15 ~53

For models with low

temperature cooling

system

INSTALLATION MANUAL---Important considerations for R32/R290

Important Considerations

The air conditioner you buy must be installed by professional personnel and the

Installation manual is used only for the professional installation personnel! The

installation specifications should be subject to our after-sale service regulations.

When filling the combustible refrigerant, any of your rude operations may cause

serious injury or injuries to human body or bodies and object or objects.

A leak test must be done after the installation is completed.

It is a must to do the safety inspection before maintaining or repairing an air

conditioner using combustible refrigerant in order to ensure that the fire risk is reduced

to minimum.

It is necessary to operate the machine under a controlled procedure in order to ensure

that any risk arising from the combustible gas or vapor during the operation is reduced

to minimum.

Requirements for the total weight of filled refrigerant and the area of a room to be

equipped with an air conditioner (are shown as in the following Tables GG.1 and GG.2)

INSTALLATION MANUAL---Important considerations for R32/R290

The maximum charge and the required minimum floor area

3 3 3

m = (4 ) x m LFL , m = (26 m)) x LFL, m = (130 m )x LFL

1 2 3

3 3 3

Where LFL is the lower flammable limit in kg/ mR290 LFL is 0.038 kg/ ,R3m

For the appliances with a charge amount m < = :M m

1 2

(5/4)

The maximum charge in a room shall be in accordance with the following:m= 2 5 x (LFL) x h

max

1/2

x ( )A

The required minimum floor area Amin to install an appliance with refrigerant charge M (kg)

(5/4) 2

shall be in accordance with following: A = ( / (2 5 x (M LFL) x h))

min

Where:

m is the allowable maximum charge in a room, in kg;

max

M is the refrigerant charge amount in appliance, in kg;

Amin is the required minimum room area, in m2;

A is the room area, in m ;

LFL is the lower flammable limit, in kg/m ;

h is the installation height of the appliance,in meters for calculating m or A, 1 8 m for wall

max mi n

mounted;

Table GG.1 - Maximum charge (kg)

Category

R290 0.038

R32 0.306

LFL

(kg/m )

(m)

Charge amount (M) (kg)

Minimum room area (m )

0.152kg 0.228kg 0.304kg 0.456kg 0.608kg 0.76kg 0.988kg

0.6 82 146 328 584 912 1514

1 30 53 118 210 328 555

1.8 9 16 36 65 101 171

2.2 6 11 24 43 68 115

1.224kg 1.836kg 2.448kg 3.672kg 4.896kg 6.12kg 7.956kg

0.6 29 51 116 206 321 543

1 10 19 42 74 116 196

1.8 3 6 13 23 36 60

2.2 2 4 9 15 24 40

INSTALLATION MANUAL---Important considerations for R32/R290

Installation Safety Principles

1. Site Safety

2. Operation Safety

Open Flames Prohibited Ventilation Necessary

Open Flames Prohibited

Mind Static Electricity Must wear protective clothing and anti-static gloves Don`t use mobile phone

3. Installation Safety

Refrigerant Leak Detector

Appropriate Installation

Location

The left picture is the schematic diagram of a refrigerant leak detector.

Please note that:

1. The installation site should be in a well-ventilated condition.

2. The sites for installing and maintaining an air conditioner using Refrigerant R290 should be free from open fire or

welding, smoking, drying oven or any other heat source higher than 370 which easily produces open fire; the

sites for installing and maintaining an air conditioner using Refrigerant R32 should be free from open fire or

welding, smoking, drying oven or any other heat source higher than 548 which easily produces open fire.

3. When installing an air conditioner, it is necessary to take appropriate anti-static measures such as wear anti-static

clothing and/or gloves.

4. It is necessary to choose the site convenient for installation or maintenance wherein the air inlets and outlets of the

indoor and outdoor units should be not surrounded by obstacles or close to any heat source or combustible and/or

explosive environment.

5. If the indoor unit suffers refrigerant leak during the installation, it is necessary to immediately turn off the valve of

the outdoor unit and all the personnel should go out till the refrigerant leaks completely for 15 minutes. If the

product is damaged, it is a must to carry such damaged product back to the maintenance station and it is prohibited

to weld the refrigerant pipe or conduct other operations on the user's site.

6. It is necessary to choose the place where the inlet and outlet air of the indoor unit is even.

7. It is necessary to avoid the places where there are other electrical products, power switch plugs and sockets, kitchen

cabinet, bed, sofa and other valuables right under the lines on two sides of the indoor unit.

INSTALLATION MANUAL---Important considerations for R32/R290

Special Tools

Tool Name Requirement(s) for Use

Mini Vacuum Pump

Filling Device

Leak Detector

Concentration Detector

Pressure Gauge

Fire Extinguisher

It should be an explosion-proof vacuum pump; can ensure certain precision and its

vacuum degree should be lower than 10Pa.

It should be a special explosion-proof filling device; have certain precision and

its filling deviation should be less than 5g.

It should be calibrated regularly; and its annual leak rate should not exceed 10g.

A) The maintenance site should be equipped with a fixed-type combustible

refrigerant concentration detector and connected to a safeguard alarm system;

its error must be not more than 5%.

B) The installation site should be equipped with a portable combustible refrigerant

concentration detector which can realize two-level audible and visual alarm;

its error must be not more than 10%.

C) The concentration detectors should be calibrated regularly.

D) It is necessary to check and confirm the functions before using the concentration

detectors.

A) The pressure gauges should be calibrated regularly.

B) The pressure gauge used for Refrigerant 22 can be used for Refrigerants R290

and R161; the pressure gauge used for R410A can be used for Refrigerant 32.

It is necessary to carry fire extinguisher(s) when installing and maintaining an air

conditioner. On the maintenance site, there should be two or more kinds of dry

powder, carbon dioxide and foam fire extinguishers and that such fire extinguishers

should be placed at stipulated positions, with eye-catching labels and in handy

places.

INSTALLATION MANUAL---Selecting the Installation Place

Condensed water

drain pipe

15cm

Sleeve

insulating covering

electrical cable

Mounting plate

Do not install the outdoor unit near sources of heat,

steam or flammable gas.

Do not install the unit in too windy or dusty places.

Do not install the unit where people often pass.Select

a place where the air discharge and operating sound

will not disturb the neighbours.

Avoid installing the unit where it will be exposed

to direct sunlight ( other wise use a protection , if

necessary, that should not interfere with the air flow).

Reserve the spaces as shown in the picture for the air to

circulate freely.

Install the outdoor unit in a safe and solid place.

If the outdoor unit is subject to vibration, place rubber

gaskets onto the feet of the unit..

water drain pipe

300

500

2000

300

minimum space to be reserved (mm) showing

in the picture

500

Installation Diagram

INDOOR UNIT

OUTDOOR UNIT

The purchaser must ensure that the person and/or company who is to install, maintain or repair this air

conditioner has qualifications and experience in refrigerant products.

Install the indoor unit on a strong wall that is not subject

to vibrations.

The in let and outlet ports should not be obstructed:the

air should be able to blow all over the room.

Do not install the unit near a source of heat , steam,or

flammable gas.

Do not install the unit where it will be exposed to

direct sunlight.

Select a site where the condensed water can be easily drained

out, and where it is easily connected to outdoor unit.

Check the machine operation regularly and reserve the

necessary spaces as shown in the picture.

Select a place where the filter can be easily taken out.

2.5m or more

INSTALLATION MANUAL---Installation of the Indoor unit

5mm

Note : Keep the drain pipe down towards the direction

of the wall hole, otherwise leakage may occur.

Before starting installation, decide on the position of the

indoor and outdoor units, taking into account the minim-

um space reserved around the units

To install, proceed as follows:

The hole must slope downwards towards the exterior

Note : The shape of the mounting plate may be different

from the one above, but installation method is similar .

Indoors Outdoors

Installation of the mounting plate

Drilling a hole in the wall for the piping

Electrical connections---Indoor unit

Do not install your air conditioner in a

wet room such as a bathroom or laundry etc

The installation site should be 250cm or more

above the floor.

1. Always mount the rear panel horizontally and vertically

2. Drill 32 mm deep holes in the wall to fix the

plate;

3. Insert the plastic anchors into the hole;

4. Fix the rear panel on the wall with provided tapping screws

5. Be sure that the rear panel has been fixed firmly enough

to withstand the weight.

1. Make the piping hole ( 65) in the wall at a slight

downward slant to the outdoor side.

2. Insert the piping-hole sleeve into the hole to prevent the

connection piping and wiring from being damaged when

passing through the hole.

1. Open the front panel.

2. Take off the cover as indicated in the piciure ( by

removing a screw or breaking the hooks).

3. For the electrical connections, see the circuit diagram

on the right part of the unit under the front panel.

4. Connect the cable wires to the screw terminals by

following the numbering ,Use wire size suitable to

the electric power input (see name plate on the unit)

and according to all current national safety code

requirements.

The cable connecting the outdoor and indoor units

must be suitable for outdoor use.

The plug must be accessible also after the appliance

has been installed so that it can be pulled out if nece-

ssary.

An efficient earth connection must be ensured.

If the power cable is damaged, it must be replaced by

an authorised Service Centre.

Note:Optional the wires can been connected to the main

PCB of indoor unit by manufacturer according to the

model without terminal block.

INSTALLATION MANUAL---Installation of the Indoor unit

The piping can be run in the 3 directions indicated by

numbers in the picture . When the piping is run in

direction 1or 3, cut a notch along the groove on the side

of the indoor unit with a cutter.

Run the piping in the direction of the wall hole and bind

the copper pipes , the drain pipe and the power cables

together with the tape with the drain pipe at the bottom,

so that water can flow freely.

1. Remove the indoor unit pipe cap (check that there is

no debris inside).

2. Insert the fare nut and create a flange at the extreme

end of the connection pipe.

3. Tighten the connections by using two wrenches

working in opposite directions.

4. For R32/R290 refrigerants, mechanical connectors

should be outdoors.

torque wrench

Indoor unit condensed water drainage

The indoor unit condensed water drainage is fundamen-

tal for the success of the installation.

1. Place the drain hose below the piping, taking care not

to create siphons.

2. The drain hose must slant downwards to aid drainage.

3. Do not bend the drain hose or leave it protruding or

twisted and do not put the end of it in water . If an

extension is connected to the drain hose , ensure that

it is lagged when it passes into the indoor unit.

4. If the piping is installed to the right, the pipes, power

cable and drain hose must be lagged and secured onto

the rear of the unit with a pipe connection.

1) Insert the pipe connection into the relative slot.

2) Press to join the pipe connection to the base.

YES

Refrigerant piping connection

Connections to the indoor unit

NO NO

YES

Extending the rolled pipe

Shape the connection pipe

Do not remove the cap from the pipe until connecting

it, to avoid dampness or dirt from entering.

If the pipe is bent or pulled too often , it will become

stiff . Do not bend the pipe more than three times at

one point.

When extending the rolled pipe, straighten the pipe by

unwinding it gently as shown in the picture.

The connectors

should be outdoors

INSTALLATION MANUAL---Installation of the Indoor unit

INSTALLATION OF THE INDOOR UNIT

refrigerant

pipe

refrigerant

pipe insulation

sleeve

connection

cable 1

(for heat-pump)

connection

cable

Probe

cable(for heat-pump) Condensed water

drain pipe

Covered by vinyl tape

After having connected the pipe according to the instruc-

tions, install the connection cables. Now install the drain

pipe. After connection,lag the pipe, cables and drain pipe

with the insulating material.

1. Arrange the pipes ,cables and drain hose well.

2. Lag the pipe joints with insulating material , securing

it with vinyl tape.

3. Run the bound pipe , Cables and drain pipe through

the wall hole and mount the indoor unit onto the upper

part of the mounting plate securely.

4. Press and push the lower part of the indoor unit tightly

against the mounting plate

mounting plate

Sometimes, if the refrigerant piping is already embedded in the wall,or if you want to connecting

the piping and wiring on the wall, do as below:

1.Gab both ends of the bottom plate, apply a little outward force to take off the bottom plate.

2.Hook the top of the indoor unit on the mounting plate without piping and wiring.

3.Lift the indoor unit opposite the wall, unfold the bracket on the mounting plate, and use this bracket

to prop up the indoor unit, there will be a big space for operation.

4.Do the refrigerant piping, wiring, connect drainage hose, and wrap them as Step 4 to 7.

5.Replace the bracket of mounting plate.

6.Push down the bottom of indoor unit to let the snaps onto the bottom hooks of the mounting plate,

and make sure it is hooked firmly.

7.Replace the bottom plate of the indoor unit.

Take off the bottom plate Unfold the bracket on the mounting plate

INSTALLATION MANUAL---Installation of the outdoor unit

The outdoor unit should be installed on a solid wall

and fastened securely.

The following procedure must be observed before co-

nnecting the pipes and connecting cables : decide

which is the best position on the wall and leave enough

space to be able to carry out maintenance easily.

Fasten the support to the wall using screw anchors

which are particularly suited to the type of wall;

Use a larger quantity of screw anchors than normally

required for the weight they have to bear to aviod

vibration during operation and remain fastened in the

same position for years without the screws becoming

loose.

The unit must be installed following the national

regulations.

The outdoor unit should be installed on a solid wall and

fastened securely, of on the ground on a flat/level surface

like a concrete slab. The bolt size is M8*80mm

drain pipe

The condensed water and the ice formed in the outdoor

unit during heating operation can be drained away thro-

ugh the drain pipe

1. Fasten the drain port in the 25mm hole placed in the

part of the unit as shown in the picture.

2. Connect the drain port and the drain pipe.

Pay attention that water is drained in a suitable place.

Outdoor unit condensed water drainage

(only for heat pump models)

drain port

INSTALLATION MANUAL---Installation of the outdoor unit

Screw the flare nuts to the outdoor unit coupling with

the same tightening procedures described for the indoor

unit.

connection pipes

flare nuts

liquid tap

gas tap

indoor unit

protection caps

liquid valve

gas valve

service port nut

To avoid leakage, pay attention to the following points:

1. Tighten the flare nuts using two wrenches. Pay atten-

tion not to damage the pipes.

2. If the tightening torque is not sufficient , there will

probably be some leakage. With excessive tightening

torque there will also be some leakage, as the flange

could be damaged.

3. The surest system consists in tightening the connecti-

on by using a fix wrench and a torque wrench as below:

ELECTRICAL CONNECTIONS

CONNECTING THE PIPES

tap

1. Remove the handle on the right side plate of outdoor unit.

2. Connect the power connection cord to the terminal board.

Wiring should fit that of indoor unit.

3. Fix the power connection cord with wire clamp.

4. Confirm if the wire has been fixed properly.

5. An efficient earth connection must be ensured.

6. Recover the handle.

7.The appliance must be fitted with means for disconnection

from the supply mains having a contact separation in all

poles that provide full disconnection under over voltage

category III conditions, and these means must be

incorporated in the fixed wiring in accordance with the

wiring rules.

screw

wiring diagram on the

back of the cover

PIPE

Size

1/4

( 6.35)

3/8

( 9.52)

1/2

( 12)

5/8

( 15.88)

Newton meter

[N x m]

18 - 20

30 - 35

45 - 50

60 - 65

Pound-force foot

(1bf-ft)

Kilogram-force meter

(kgf-m)

24.4 - 27.1

40.6 - 47.4

61.0 - 67.7

81.3 - 88.1

2.4 - 2.7

4.1 - 4.8

6.2 - 6.9

8.2 - 8.9

Air Vacuumizing

Refrigerant Pressure Inspection

Air-returning Low-pressure Range of Refrigerant

R290: 0.4-0.6Mpa; Air-exhausting High-pressure

Range: 1.5-2.0Mpa;

Air-returning Low-pressure Range of Refrigerant R32:

0.8-1.2Mpa; Air-exhausting High-pressure Range:

3.2-3.7Mpa;

It means that the refrigerating system or refrigerant of

an air conditioner is abnormal if the air-exhausting and

air-returning pressure ranges of the detected

compressor exceed the nor mal ranges to a large extent.

vacuum pump

service port

1.Use a spanner to take down the protective caps from

the service port, low pressure valve and high pressure

valve of the outdoor unit.

2.Connect the pressure hose of manifold gauge to the

service port on the outdoor unit low pressure valve.

3.Connect the charge hose from the manifold gauge

to the vacuum pump.

4.Open the low pressure valve of the manifold gauge

and close the high pressure valve.

he vacuuming time should not be less than 15

minutes, or make sure the compound gauge

indicates -0.1 MPa (-76 cmHg)

7.Close the low pressure valve of the manifold gauge

and turn off the vacuum.

8.Hold the pressure for 5 minutes, make sure that the

rebound of compound gauge pointer does not

exceed 0.005 Mpa.

9.Turn the low pressure valve counterclockwise for 1/4

turn with hexagonal wrench to let a little refrigerant

fill in the system, and close the low pressure valve

after 5 seconds and quickly remove the pressure hose.

10.Check all indoor and outdoor joints for leakage

with soapy water or leak detector.

11.Fully open the low pressure valve and high pressure

valve of the outdoor unit with hexagonal wrench.

12.Replace the protective caps of the service port, low

pressure valve and high pressure valve of the outdoor unit.

13.Replace the valve cover.

5.Turn on the vacuum pump to vacuumize the system.

6.T

Manifold gauge

compound gauge

Low pressure valve

Valve protective caps

Pressure hose

Pressure gauge

High pressure valve

Charge hose

High pressure valve

Low pressure valve

Vacuum pump

Service port

INSTALLATION MANUAL---Installation of the outdoor unit

Tuotetiedot

Merkki:	TCL
Kategoria:	Ilmastointi
Malli:	TAC-12CHSD/TPG11I

Tarvitsetko apua?

Jos tarvitset apua merkille TCL TAC-12CHSD/TPG11I esitä kysymys alla ja muut käyttäjät vastaavat sinulle

Nimesi*

Sähköpostisi*

Kirjoita kysymyksesi tähän

Ilmastointi TCL Käyttöohjeet

TCL TAC12CSAITPG11 Käyttöohje

31 Maaliskuuta 2025

TCL FMA-42I5HD/DVO Käyttöohje

23 Tammikuuta 2025

TCL TAC-09CHSD Käyttöohje

16 Tammikuuta 2025

TCL TAC-12CHSD/TPH11IT Käyttöohje

16 Tammikuuta 2025

TCL TAC-12CSD/XAC1 Käyttöohje

16 Tammikuuta 2025

TCL TAC-28CHSD/TPH11IT Käyttöohje

16 Tammikuuta 2025

TCL TAC-18CHSD Käyttöohje

16 Tammikuuta 2025

TCL TAC-24CHSD Käyttöohje

16 Tammikuuta 2025

TCL TAC-09CHSD/TPH11IT Käyttöohje

16 Tammikuuta 2025

TCL TAC-28CHSD Käyttöohje

16 Tammikuuta 2025

Ilmastointi Käyttöohjeet

Viimeisimmät Ilmastointi Käyttöohjeet

Daikin FWP17CATN6V3 Käyttöohje

9 Huhtikuuta 2025

Daikin FWP06CAFN6V3 Käyttöohje

9 Huhtikuuta 2025

Panasonic CS-45KA1E5 Käyttöohje

9 Huhtikuuta 2025

Daikin FXNQ63A2VEB Käyttöohje

9 Huhtikuuta 2025

Daikin FXNQ20A2VEB Käyttöohje

9 Huhtikuuta 2025

Frigidaire GHWW125TE1 Käyttöohje

9 Huhtikuuta 2025

Frigidaire GHWW105TE1 Käyttöohje

9 Huhtikuuta 2025

Frigidaire FHPH142AA1 Käyttöohje

9 Huhtikuuta 2025

Frigidaire GHPC142AA1 Käyttöohje

9 Huhtikuuta 2025

Frigidaire GHPH142AA1 Käyttöohje

9 Huhtikuuta 2025