Toro 51498T Käyttöohje

Toro Grastrimmer 51498T

Lue alta 📖 käyttöohje suomeksi merkille Toro 51498T (4 sivua) kategoriassa Grastrimmer. Tämä opas oli hyödyllinen 9 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/4
25.4cc Gas Power Head
Item No. 51948—319000001 & Up
English (EN), French (FR), and Spanish (ES)
WARNING:
To reduce the risk of injury, the user must read and understand the operators manual. Save this manual.
Form No. 3427-358 Rev. A
NOTICE
Do not use E15, E20 or E85 fuel in this
product. It is a violation of federal law
and will damage the unit and void your
warranty. Only use unleaded gasoline
containing up to 10% ethanol.
If you have questions concerning
your trimmer, please call us
at 866-574-9242 (US) or
866-574-9243 (Canada).
2
READ THIS INFORMATION
Before you use your new trimmer, read the following helpful hints to
get you started.
Fueling
WARNING:
Gasoline and its vapors are highly ammable and
explosive. To prevent serious personal injury and
property damage, handle it with care. Keep away
from ignition sources and open ames, handle
outdoors only, do not smoke and wipe up spills
immediately.
1. Obtain a clean container that is approved for use with gasoline.
2. Mix all of the 2-cycle lubricant provided with 1 US gallon of 87-octane, unleaded gasoline (50:1).
3. Fill the trimmers gas tank carefully.
Cold Starting vs. Warm Starting
When you restart the trimmer and you are not sure whether the engine is still warm, set the choke
lever to RUN and pull the starter cord. If the engine does not start within 5 pulls, refer to “To Start a
Cold Engine” later in this manual.
Flooded Engine
Will the engine start? If not, it may be ooded. Relax, this is easy to correct. Set the choke lever to
RUN. Squeeze the trigger and pull the starter cord quickly for 10 to 12 pulls.
If the engine does not start, refer to “Troubleshooting” later in this manual or call toll-free at
866-574-9242 (US) or 866-574-9243 (Canada).
CALL
866-574-9242 (US) or
866-574-9243 (Canada)
For questions concerning your trimmers,
call us toll free at 866-574-9242 (US) or
866-574-9243 (Canada).
STOP
3
Table of Contents
Introduction ...................................................................................................................................................................................4
General Safety Rules ................................................................................................................................................................. 5-6
Specic Safety Rules 6 ....................................................................................................................................................................
Symbols 7.........................................................................................................................................................................................
Product Labels 8 ..............................................................................................................................................................................
Features .........................................................................................................................................................................................9
Product Specications 9 ...........................................................................................................................................................
Assembly 10-11................................................................................................................................................................................
Unpacking 10 ............................................................................................................................................................................
Packing List .........................................................................................................................................................................10
Connecting the Attachment to the Upper Shaft 10 ...................................................................................................................
Removing the Attachment from the Upper Shaft ................................................................................................................11
Attaching the Front Handle .................................................................................................................................................11
Operation ............................................................................................................................................................................... 12-14
Applications .........................................................................................................................................................................12
Fueling and Refueling the Power Head ...............................................................................................................................12
Oxygenated Fuels ...............................................................................................................................................................13
Starting the Product .............................................................................................................................................................13
Stopping the Product ............................................................................................................................................................13
Operating the Power Head ...................................................................................................................................................14
Blade Thrust ........................................................................................................................................................................14
Maintenance .......................................................................................................................................................................... 15-19
General Maintenance ...........................................................................................................................................................15
Cleaning the Product ............................................................................................................................................................15
Servicing the Product ...........................................................................................................................................................15
Checking the Fuel Cap, Tank, and Lines .............................................................................................................................15
Cleaning the Air Filter .........................................................................................................................................................15
Replacing the Spark Arrestor ...............................................................................................................................................16
Replacing the Spark Plug .....................................................................................................................................................17
Idle Speed Adjustment .........................................................................................................................................................17
Storing the Product ..............................................................................................................................................................18
Transporting the Product .....................................................................................................................................................18
High Altitude Engine Operation ..........................................................................................................................................18
Maintenance Schedule .........................................................................................................................................................19
Troubleshooting 20 ..........................................................................................................................................................................
Warranty ......................................................................................................................................................................................21
California Proposition 65 Warning Information .........................................................................................................................22
Table of Contents

Tuotetiedot

Merkki: Toro
Kategoria: Grastrimmer
Malli: 51498T

Tarvitsetko apua?

Jos tarvitset apua merkille Toro 51498T esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Grastrimmer Toro Käyttöohjeet

Toro

Toro 51464 Käyttöohje

8 Huhtikuuta 2025
Toro

Toro 51930 Käyttöohje

8 Huhtikuuta 2025
Toro

Toro 51348 Käyttöohje

15 Lokakuuta 2024
Toro

Toro 51249 Käyttöohje

15 Lokakuuta 2024
Toro

Toro 88715 Käyttöohje

15 Lokakuuta 2024
Toro

Toro 23522 Käyttöohje

15 Lokakuuta 2024
Toro

Toro 51597 Käyttöohje

15 Lokakuuta 2024
Toro

Toro 51595 Käyttöohje

15 Lokakuuta 2024
Toro

Toro 51596 Käyttöohje

15 Lokakuuta 2024
Toro

Toro 51461 Käyttöohje

15 Lokakuuta 2024

Grastrimmer Käyttöohjeet

Viimeisimmät Grastrimmer Käyttöohjeet

Makita

Makita BCX2500 Käyttöohje

1 Huhtikuuta 2025
Bavaria

Bavaria BBC 43 Käyttöohje

29 Maaliskuuta 2025
Einhell

Einhell BG-BC 43 AS Käyttöohje

29 Maaliskuuta 2025
Einhell

Einhell BG-BC 25 S Käyttöohje

29 Maaliskuuta 2025
Makita

Makita DST300 Käyttöohje

29 Maaliskuuta 2025
Makita

Makita BCM4300 Käyttöohje

28 Maaliskuuta 2025
Makita

Makita BCM2600 Käyttöohje

28 Maaliskuuta 2025
Makita

Makita BCM2310 Käyttöohje

28 Maaliskuuta 2025
Makita

Makita BCM3300 Käyttöohje

28 Maaliskuuta 2025
Einhell

Einhell RG-CG 7,2 Li Käyttöohje

27 Maaliskuuta 2025