V-Tac VT-406S Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille V-Tac VT-406S (3 sivua) kategoriassa Lamppu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/3
INSTRUCTION MANUAL
SOLAR LED WALL LIGHT
INTRODUCTION
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instruc-
tions carefully before starting the installation and keep this manual handy for future reference. If you have any
another query, please contact our dealer or local vendor from whom you have purchased the product. They
are trained and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The
warranty does not apply to damage caused by incorrect installation or abnormal wear and tear. The company
gives no warranty against damage to any surface due to incorrect removal and installation of the product. The
products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the
warranty. This product is warranted for manufacturing defects only.
MULTI-LANGUAGE MANUAL QR CODE
Please scan the QR code to access the
manual in multiple languages.
This marking indicates that this product
should not be disposed of with other
household wastes.
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
TECHNICAL DATA
PACKAGE CONTENT
MODEL VT-406
SKU 10307, 10308
LUMENS 900 LM
OUTPUT POWER 6W
EQUIVALENT WATT 60 W
LEDs SMD 2835x35 pcs
SOLAR PANEL 2.8W, DC 5.5V, Mono with tempered glass
BATTARY PACK 18650/3000mAh/3.7V/11.1Wh, Lithium, Replaceable
BEAM ANGLE 140° *70° polarized design
PIR Sensor Range Detection Angle: 120°; Detection Distance: <6M
CHARGING TIME 8-10 Hours, Strong sunshine to fully charge
LIGHTING TIME MODE A: 4 Nights+ MODE B: 2 Nights+
IP CLASS IP65 Waterproof & Dustproof
HOUSING MATERIAL ABS+PC housing, Anti-UV, V0 material for fire-proof
HOUSING COLOR Bric-red/Black/White
LAMP DIMENSION 230*97*42.7mm
INSTALLATION HEIGHT Less than 4mtrs
WORKING TEMPERATURE -20°C - 60°C
STORAGE TEMPERATURE 0°C - 45°C
WARRANTY 2 Years
PACKING Color Box
(1 PC *Lamp, 2PCS * 1PC* Measure Card, 1PC *User Manual)
1PC* Lamp 2PCS*Screws 1PC* Measure Card 1PC* User Manual
WARNING
1. This is a solar powered lamp, please install it in a location where can get ecient sunlight.
2. Please note the lighting time depends on sunshine duration & work mode.
3. Built-in intelligent IC is with over-charge and over-discharge protection, safe and durable.
4. When the lamp is turned o, it still can get solar charging at day time.
5. Non-professionals please do not disassemble the lamp.
6. Please do not dispose the battery with household garbage to avoid explosion.
TWO OPTIONAL WORKING MODES
INSTALLATION
MODE A: SENSOR MODE
MODE B: KEEP LIGHTING MODE
Please press the button on the back of the lamp to turn on the lamp
and select working mode.
* Press the button 1st time, the lamp turns on and enter Mode A.
* Press the button 2nd time, lamp flickers once and turns to Mode B.
* Press the button 3rd time, lamp turns o.
When battery power is more than 30%:
Lamp automatically lights up at night and turns to full
brightness when motion is detected in the range ≤6mtrs,
then dim to 5% brightness aer 20 seconds of no motion.
When battery power is less than 30%:
Lamp automatically lights up at night and turns to full
brightness when motion is detected in the range ≤6mtrs
and then turn o aer 20 seconds of no motion.
Lamp automatically lights up at night and keeps 50% brightness, aer 5 hours or when battery power is less than 30%,
lamp turns to energy saving mode: Lamp automatically turns to full brightness when motion is detected in the range
≤6mtrs, then turns o aer 20 seconds of no motion.
Turn on the lamp & select
working mode.
5
1. Please use the measure cardl to mark holes position and drill 2 holes
(46mm, depth 50mm) with a spacing of 140mm.
2. Fix the expansion plugs in the holes.
3. Fix the screws into the expansion plugs, allow the screws to protrude slightly around 4mm.
4. Turn on the lamp and set desired working mode.
5. Hang the lamp on the screws to secure it to the wall.
Tuotetiedot
| Merkki: | V-Tac |
| Kategoria: | Lamppu |
| Malli: | VT-406S |
Tarvitsetko apua?
Jos tarvitset apua merkille V-Tac VT-406S esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Lamppu V-Tac Käyttöohjeet
19 Lokakuuta 2024
18 Lokakuuta 2024
18 Lokakuuta 2024
18 Lokakuuta 2024
18 Lokakuuta 2024
18 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
Lamppu Käyttöohjeet
- Lamppu Ledlenser
- Lamppu Neewer
- Lamppu Topeak
- Lamppu Godox
- Lamppu IKEA
- Lamppu Sony
- Lamppu ET2
- Lamppu Crystorama
- Lamppu Brennenstuhl
- Lamppu EMOS
- Lamppu BeamZ
- Lamppu Maxim
- Lamppu Ansmann
- Lamppu Elation
- Lamppu Fredrick Ramond
- Lamppu Chauvet
- Lamppu Karma
- Lamppu Ridem
- Lamppu Hansa
- Lamppu Casalux
- Lamppu Profoto
- Lamppu Petzl
- Lamppu Gravity
- Lamppu Olight
- Lamppu Kanlux
- Lamppu Xline
- Lamppu ARRI
Viimeisimmät Lamppu Käyttöohjeet
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024