V-Tac VT-9-111 Käyttöohje

V-Tac Lamppu VT-9-111

Lue alta 📖 käyttöohje suomeksi merkille V-Tac VT-9-111 (2 sivua) kategoriassa Lamppu. Tämä opas oli hyödyllinen 7 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/2
[EN] INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions carefully before starting the installing
and keep this manual handy for future reference. If you have any another query, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at the best.The warranty is valid for 5 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no warranty against damage to any surface
due to incorrect removal and installation of the product. The products are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day
would void the warranty. This product is warranted for manufacturing defects only.
WARNING
• Please make sure to turn off the power before starting the installation.
• Installation must be performed by a qualified electrician.
• The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire should be replaced.
• If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar
qualified person in order to avoid a hazard.
• Replace any cracked protective shield.
• Terminal block not included.
• Proper grounding should be ensured throughout the installation.
• To be connected with waterproof cable hose.
• To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be effectively fixed to the wall if the wiring is within arm's reach
• Only contact with DC Power
INSTALLATION DIAGRAM:
TECHNICAL DATA:
LED HIGHBAY SERIES
INSTALLATION INSTRUCTIONS
DIMENSION DIAGRAM:
Caution, risk of electric shock.
This marking indicates that this
product should not be disposed
of with other household wastes.
IP65
RATING
22
PAP
Non-replaceable
control gear
Replaceable (LED only)
light source by a
professional
MODEL LUMENSWATTS BEAM
ANGLE MATERIAL CRI DF DIMENSION INPUT
POWER
WIRE
LENGTH
VT-9-111 100W 14000LM Sphere 360° ALUMINUM 70 >0.9 233*156mm 30CM
VT-9-161 150W 21000LM Sphere 360° ALUMINUM 70
70
>0.9 278*156mm 30CM
VT-9-211 200W 28000LM Sphere 360° ALUMINUM >0.9 305*156mm 30CM
AC:175-265V,
50/60Hz
5
YEARS
WARRANTY
*
'This product contains a light source of energy efficiency class <D>', where <D> shall be replaced by the
energy efficiency class of the contained light source.
Steps to Remove the Light source for Verification
(ONLY FOR MARKET SURVEILLANCE AUTHORITY)
STEPS TO REMOVE THE LIGHT SOURCE FOR VERIFICATION
1. Unscrew the four screws (M3) on the middle lens with a wrench.
2. Unscrew the 10 screws (M3) on the lens with a wrench.
Note: Light Source Removal will void the warranty.
INSTALLATION INSTRUCTION
Step 1: Switch off the power before starting the installation.
Step 2: Seal spring shim between bolts, then lock down
Step 3: Connect the wires as per the wiring diagram
Step 4: Hand the lamp carefully
Step 5: Switch on the power and test the light
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
to access the manual in
multiple languages.

Tuotetiedot

Merkki: V-Tac
Kategoria: Lamppu
Malli: VT-9-111

Tarvitsetko apua?

Jos tarvitset apua merkille V-Tac VT-9-111 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Lamppu V-Tac Käyttöohjeet

V-Tac

V-Tac VT-8340CCT Käyttöohje

5 Joulukuuta 2024
V-Tac

V-Tac VT-8350CCT Käyttöohje

5 Joulukuuta 2024
V-Tac

V-Tac VT-40W Käyttöohje

19 Lokakuuta 2024
V-Tac

V-Tac VT-1147 Käyttöohje

18 Lokakuuta 2024
V-Tac

V-Tac VT-1140 Käyttöohje

18 Lokakuuta 2024
V-Tac

V-Tac VT-1138 Käyttöohje

18 Lokakuuta 2024
V-Tac

V-Tac VT-1139 Käyttöohje

18 Lokakuuta 2024
V-Tac

V-Tac VT-120W Käyttöohje

18 Lokakuuta 2024
V-Tac

V-Tac VT-44204 Käyttöohje

16 Lokakuuta 2024
V-Tac

V-Tac VT-ST201 Käyttöohje

16 Lokakuuta 2024

Lamppu Käyttöohjeet

Viimeisimmät Lamppu Käyttöohjeet