V-Tac VT-ST201 Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille V-Tac VT-ST201 (3 sivua) kategoriassa Lamppu. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/3
INSTRUCTION MANUAL
LED SOLAR STREET LIGHT
TECHNICAL DATA
MODEL VT-ST201
SKU 23578, 23579
SOLAR PANEL WATTS 50W
LUMENS 4000 Lm
BEAM ANGLE Sphere 120°
LED CHIP TYPE 2835SMD
NUMBER OF LEDs 406
CRI 70
LIFE SPAN 20,000 Hours
ON/OFF CYCLE 15,000 Times
MAXIMUM MOUNTING
HEIGHT 6 M
OPERATIONAL
TEMPERATURE -20°C to +60°C
BATTERY CAPACITY 50,000 mAh
BATTERY TYPE Lithium Iron Phosphate
Cell
DC VOLTAGE 3.2V
CHARGING TIME 4-6 Hours
In case of any query/issue with the product, please reach out to us at: support@v-tac.eu
For More products range, inquiry please contact our distributor or nearest dealers.
V-TAC EUROPE LTD. Bulgaria, Plovdiv 4000, bul.L.Karavelow 9B
MULTI-LANGUAGE
MANUAL QR CODE
Please scan the QR code
toaccess the manual in
multiple languages.
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these instructions
carefully before starting the installation and keep this manual handy for future reference. If you have any another
query, please contact our dealer or local vendor from whom you have purchased the product. They are trained
and ready to serve you at the best. The warranty is valid for 2 years from the date of purchase. The warranty
does not apply to damage caused by incorrect installation or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installation of the product. The products
are suitable for 10-12 Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This
product is warranted for manufacturing defects only.
WORKING TIME 8-12 Hours
INPUT VOLTAGE AC: 100-240V, 50/60Hz
(For AC Connection)
MAX. INSTALLATION
HEIGHT 6M
MATERIAL Aluminium
DIMENSION XXXxXXXxXXX mm
This marking indicates that this product
should not be disposed of with other
household wastes.
Caution, risk of electric shock.
Solar Panel
Solar Charging Solar Charging
Solar Light Remote 1M Cable Arm Stand
Expanion
Screw
PACKAGE CONTENT
HYBRID FUNCTION
LAMP POST INSTALLATION WALL MOUNT INSTALLATION
WARNING
1. Please make sure to turn o the power before starting the installation.
2. Installation must be performed by a qualified electrician.
3. The light source of this luminaire is not replaceable, when the light source reaches its end of life the whole luminaire
should be replaced.
4. If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer
or his service agent or a similar qualified person in order to avoid a hazard.
5. Replace any cracked protective shield.
6. Minimum distance from lighted objects 1m.
7. Proper grounding should be ensured throughout the installation.
NOTE: To reduce the risk of strangulation the flexible wiring connected to this luminaire shall be eectively
fixed to the wall if the wiring is within arm’s reach.
The system will automatically switch to AC power when the battery level is low or drain.
Light Source
Light Source
Arm Stand
(For Wall/Pole Installation)
Arm Stand
(For Wall/Pole Installation)
Plug the male and female plugs and tighten the waterproof cap
Neutral Supply can be Blue or Black
Ground Supply Can be Green-yellow
Live Supply Can be Red or Brown
WIRING DIAGRAM FOR AC CONNECTION
Optically Controlled
3 Hours regular
5 Hours regular
8 Hours regular
Full bright mode
Semi-Bright mode
Force to turn on the lights
(Optical control is null)
Force to turn o the lights
(Optical control is null)
REMOTE CONTROLLER INSTRUCTIONS
INSTALLATION INSTRUCTIONS
• Before installing please remove all the parts to check if all are in good condition or not.
• Install the Arm Stand on a wall or on a Lamp Pole with the Expansion Screws
• Fix the Solar Panel on the Bracket. Fix them on the Arm Stand and tighten the screws.
• The luminaire should be connected to the solar panel against the sun light. Please makes
sure the solar panel is adjusted in correct angle in order to receive sunlight.
• Aer installation test the light using the remote control.
• The remote control is designed with an operation distance of 8-10m
SOLAR PANEL MAINTENANCE & WARNING
• Do not use solvents, petrol, etc. Otherwise the light will be damaged.
• Clean the light with a dry, lint-free cloth.
• Check the solar panel for dirt regularly. If dirt or is present remove it to guarantee
flawless function of the product.
• Especially during the winter, keep the product free from snow and ice.
• Confirm installation direction is correct (solar panel should be at top).
• Confirm no objects blocking the solar panel to receive sunlight.
• Keep away from the fire.
• Don’t immerse in the water.
Tuotetiedot
| Merkki: | V-Tac |
| Kategoria: | Lamppu |
| Malli: | VT-ST201 |
Tarvitsetko apua?
Jos tarvitset apua merkille V-Tac VT-ST201 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Lamppu V-Tac Käyttöohjeet
19 Lokakuuta 2024
18 Lokakuuta 2024
18 Lokakuuta 2024
18 Lokakuuta 2024
18 Lokakuuta 2024
18 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024
Lamppu Käyttöohjeet
- Lamppu Ledlenser
- Lamppu Neewer
- Lamppu Topeak
- Lamppu Godox
- Lamppu IKEA
- Lamppu Sony
- Lamppu ET2
- Lamppu Crystorama
- Lamppu EMOS
- Lamppu BeamZ
- Lamppu Maxim
- Lamppu Ansmann
- Lamppu Elation
- Lamppu Fredrick Ramond
- Lamppu Chauvet
- Lamppu Karma
- Lamppu Ridem
- Lamppu Hansa
- Lamppu Casalux
- Lamppu Profoto
- Lamppu Petzl
- Lamppu Gravity
- Lamppu Olight
- Lamppu Kanlux
- Lamppu Xline
- Lamppu ARRI
Viimeisimmät Lamppu Käyttöohjeet
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024
27 Lokakuuta 2024