Vogels PFW 6852 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Vogels PFW 6852 (17 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/17
INSTALLATION INSTRUCTIONS
PFW6852
Display Wall Mount, Turn & Tilt 136 kg
9531-007-Z01-00
PFW6852
Page 2 Visit the Vogel’s website at http://www.vogels.com Installation Instructions
Contact Vogel’s with any questions:
+31 40 264 7400
Warning Statements
Weight Limit
Maximum Flat Panel Weight: 300 lbs.
THE WALL STRUCTURE MUST BE CAPABLE OF
SUPPORTING AT LEAST FOUR TIMES THE WEIGHT OF
THE FLAT PANEL. IF NOT, THE WALL STRUCTURE MUST
BE REINFORCED.
PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS MUST BE READ AND
COMPLETELY UNDERSTOOD. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION
FOR FUTURE REFERENCE.
PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN MUST BE FOLLOWED, AS OUTLINED
IN THESE INSTALLATION INSTRUCTIONS. FAILURE TO DO SO COULD RESULT IN PROPERTY DAMAGE, SERIOUS
PERSONAL INJURY, OR EVEN DEATH.
SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE
PROPER SAFETY EQUIPMENT AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY.
VOGEL’S DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY VOGEL’S PRODUCT FOR
PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED
ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS,
ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER
RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.
At least two qualied people should perform the assembly procedure. Personal injury and/or property damage can result
from dropping or mishandling the at panel.
If mounting to wall studs, make sure that the mounting screws are anchored into the center of the wall studs. Use of an
edge-to-edge stud nder is recommended.
It is recommended that a minimum of 1/2” drywall be used when mounting to wooden studs.
Be aware of the mounting environment. If drilling and/or cutting into the mounting surface, always make sure that there
are no electrical wires in wall. Cutting or drilling into an electrical line may cause serious personal injury.
Make sure there are no water or natural gas lines inside the wall where the mount is to be located. Cutting or drilling into a
water or gas line may cause severe property damage or personal injury.
This product is intended for indoor use only. Use of this product outdoors could lead to product failure and/or serious
personal injury.
Do not install near sources of high heat. Do not install on a structure that is prone to vibration, movement or chance of
impact.
Contents
Contents. 2 .........................................................................................................................................................................
Weight Limit. 2 ....................................................................................................................................................................
Warning Statements. 2 .......................................................................................................................................................
Installation Tools. ............................................................................................................................................................. 3
Parts List.......................................................................................................................................................................... 3
Hardware. ........................................................................................................................................................................ 4
Features. 5 .........................................................................................................................................................................
Installing the Swingout Arm. 6 ............................................................................................................................................
Introduction. .............................................................................................................................................................. 6
Mount Orientation. 6 ....................................................................................................................................................
Nose Piece Orientation. 7 ............................................................................................................................................
Wood Stud Installation. ............................................................................................................................................. 8
Concrete Installation. 8 ................................................................................................................................................
Mounting Hardware Selection. 10 ......................................................................................................................................
Selecting the Mounting Hardware. 10 ..........................................................................................................................
Griplate™ Washer Installation. ................................................................................................................................11
Nylon Spacer Installation. ........................................................................................................................................11
Mounting Bracket Installation. 12 .......................................................................................................................................
Universal Bracket Installation. 12 .................................................................................................................................
Adapter Plate Installation (Optional). 13 ......................................................................................................................
Attaching the Flat Panel to the Swingout Arm. .............................................................................................................. 15
Fine Tuning & Adjustments. 16 ...........................................................................................................................................
Tilt Positioning. ........................................................................................................................................................ 16
Cable Management. ................................................................................................................................................ 16
Technical Specications. 17 ...............................................................................................................................................
Warranty 18 ........................................................................................................................................................................
Disclaimer ...................................................................................................................................................................... 18
PFW6852
Installation Instructions Visit the Vogel’s website at http://www.vogels.com Page 3
Parts List
Installation Tools
The following tools may be required, dependent upon your particular installation. These tools are not provided by
Vogel’s, but you can purchase them at your local hardware store.
Your Vogel’s product is shipped with all proper installation hardware and components. Make sure that none of these
parts are missing and/or damaged before beginning installation. If there are parts missing and/or damaged, please stop
the installation and contact Vogel’s +31 40 264 7400.
PFW6852 Swingout Arm
(Qty 1)
PFW6852 Universal Swingout Arm Hardware
5/16x 3″ Lag Bolts (Qty 6)
Wood Stud Installation Only
Pencil
Level
(Qty 1)
¼˝ Wood
Drill Bit
Electronic Stud Finder
Socket Wrench
Phillips Tip
Screwdriver
Tape MeasureHand Held Drill
Hammer
3/8” Concrete
Drill Bit
Griplate™
(Qty 8)
Protective Eyewear
Universal Brackets
(Qty 2)
5/16Flat Washers
(Qty 6)
Thread Depth Indicator
(Qty 1)
5/32″ Allen Wrench
(Qty 1)
14mm Socket
(Qty 1)
½″ Socket
Universal Bracket Bar
(Qty 1)
Adapter Plates
(Qty 4)
M8 Nylon Nuts
(Qty 4)
Tools (supplied)
M10 x 30mm Screws
(Qty 4)
2
1
5/16″ Flat Washers
(Qty 4)
Adapter Plates and
Hardware

Tuotetiedot

Merkki: Vogels
Kategoria: Ei luokiteltu
Malli: PFW 6852

Tarvitsetko apua?

Jos tarvitset apua merkille Vogels PFW 6852 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Vogels Käyttöohjeet

Vogels

Vogels PFW 6880 Käyttöohje

1 Huhtikuuta 2025
Vogels

Vogels PFW 6870 Käyttöohje

27 Maaliskuuta 2025
Vogels

Vogels PFF 5211 Käyttöohje

21 Helmikuuta 2025
Vogels

Vogels PFF 7920 Käyttöohje

21 Helmikuuta 2025
Vogels

Vogels THIN 405 Käyttöohje

21 Helmikuuta 2025
Vogels

Vogels PFW 2040 Käyttöohje

28 Tammikuuta 2025
Vogels

Vogels PFW 6800 Käyttöohje

28 Tammikuuta 2025
Vogels

Vogels PFW 2020 Käyttöohje

28 Tammikuuta 2025
Vogels

Vogels PFW 3040 Käyttöohje

28 Tammikuuta 2025
Vogels

Vogels PFW 6810 Käyttöohje

28 Tammikuuta 2025

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet