VTech CS6114 Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille VTech CS6114 (4 sivua) kategoriassa Puhelin. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/4
What’s in the box
Your telephone package contains the following
items. Save your sales receipt and original
packaging in the event warranty service is
necessary.
Handset overview
1 – Handset earpiece
2 – LCD display
3 – CID/VOL-
• Review the caller ID log when the telephone is not
in use.
• Scroll down while in a menu, or in the directory,
caller ID log or redial list.
• Move the cursor to the left when entering numbers
or names.
• Decrease the listening volume during a call.
4 – /FLASH
• Make or answer a call.
• Answer an incoming call when you receive a call
waiting alert.
5 – 1
• Press repeatedly to add or remove 1 in front of the
caller ID log entry before dialing or saving it to the
directory.
6 – TONE
• Switch to tone dialing temporarily during a call.
7 – MUTE/DELETE
• Mute the microphone during a call.
• Silence the handset ringer temporarily while the
phone is ringing.
• Delete the displayed entry while reviewing the
directory, caller ID log or redial list.
• Delete digits or characters when entering numbers
or names.
8 – Microphone
9 – Charging pole
10 – MENU/SELECT
• Show the menu.
• While in a menu, press to select an item, or save
an entry or setting.
11 – /VOL+
• Review the directory when the phone is not in
use.
• Scroll up while in a menu, or in the directory,
caller ID log or redial list.
• Move the cursor to the right when entering
numbers or names.
• Increase the listening volume during a call.
12 – OFF/CANCEL
• Hang up a call.
• Return to the previous menu or idle mode without
making changes.
• Delete digits while predialing.
• Silence the handset ringer temporarily while the
phone is ringing.
• Erase the missed call indicator while the handset
is not in use.
13 – 0/OPER
• Enter space character during text editing.
14 – #
• Show other dialing options when reviewing a
caller ID log entry.
15 – REDIAL/PAUSE
• Review the redial list.
• Insert a dialing pause while dialing or entering
numbers into the directory.
16 – Battery compartment cover
Telephone base overview
1 – /FIND HANDSET
• Page all system handsets.
2 – Charging pole
Charger overview
1 – Charging pole
Display icons overview
The battery icon flashes when the
battery is low and needs charging.
The battery icon animates when the
battery is charging.
The battery icon becomes solid when
the battery is fully charged.
There are new voicemail received
from your telephone service provider.
NEW There are new caller ID log entries.
Connect
You can choose to connect the telephone base
for desktop usage or wall mounting.
NOTES
• Use only the adapters provided.
• Make sure the electrical outlets are not controlled by
wall switches.
• The adapters are intended to be correctly oriented in
a vertical or floor mount position. The prongs are not
designed to hold the plug in place if it is plugged into
a ceiling, under-the-table or cabinet outlet.
TIP
• If you subscribe to digital subscriber line (DSL) high-
speed Internet service through your telephone line,
make sure you install a DSL filter (not included)
between the telephone line cord and telephone wall
jack. Contact your DSL service provider for more
information.
Connect the telephone base
Connect the charger
Mount the telephone base
Install and charge the battery
Install the battery
Install the battery as shown below.
NOTES
• Use only supplied battery.
• Charge the battery provided with this product only
in accordance with the instructions and limitations
specified in this manual.
• If the handset will not be used for a long time,
disconnect and remove the battery to prevent
possible leakage.
Charge the battery
Place the handset in the telephone base or the
charger to charge.
Once you have installed the battery, the handset
LCD display indicates the battery status (see the
table below).
NOTES
• For best performance, keep the handset in the
telephone base or charger when not in use.
• The battery is fully charged after 16 hours of
continuous charging.
• If you place the handset in the telephone base or
the charger without plugging in the battery, the
screen displays No battery.
Battery
indicators Battery status Action
The screen
is blank, or
displays Put in
charger and
flashes.
The battery has
no or very little
charge. The
handset cannot
be used.
Charge without
interruption
(at least 30
minutes).
The screen
displays
Low battery
and flashes.
The battery has
enough charge
to be used for a
short time.
Charge without
interruption
(about 30
minutes).
The screen
displays
HANDSET X.
The battery is
charged.
To keep
the battery
charged,
place it in the
telephone base
or charger when
not in use.
Before use
After you install your telephone or power returns
following a power outage, the handset will prompt
you to set the date and time.
Set date and time
1. Use the dialing keys ( ) to enter the month 0-9
( ), date ( ) and year ( ). Then press MM DD YY
SELECT.
2. Use the dialing keys ( ) to enter the hour 0-9
( ) and minute ( ). Then press HH MM
or
to
choose AM or .PM
3. Press SELECT to save.
Check for dial tone
Press . If you hear a dial tone, the installation is
successful.
If you do not hear a dial tone:
• Make sure the installation procedures
described above are properly done.
• It may be a wiring problem. If you have
changed your telephone service to digital
service from a cable company or a VoIP
service provider, the telephone line may need
to be rewired to allow all existing telephone
jacks to work. Contact your cable/VoIP service
provider for more information.
Operating range
This cordless telephone operates with the
maximum power allowed by the Federal
Communications Commission (FCC). Even
so, this handset and telephone base can
communicate over only a certain distance - which
can vary with the locations of the telephone base
and handset, the weather, and the layout of your
home or office.
When the handset is out of range, the handset
displays Out of range or no pwr at base.
If there is a call while the handset is out of range,
it may not ring, or if it does ring, the call may not
connect well when you press . Move closer to
the telephone base, then press to answer the
call.
If the handset moves out of range during
a telephone conversation, there may be
interference. To improve reception, move closer
to the telephone base.
Use the handset menu
1. Press MENU when the phone is not in use.
2. or until the screen displays the Press
desired feature menu.
3. Press SELECT.
• To return to the previous menu, press
CANCEL.
• To return to idle mode, press and hold
CANCEL.
Configure your telephone
Set language
The LCD language is preset to English. You can
select English, French or Spanish to be used in all
screen displays.
1. Press MENU when the handset is not in use.
2. Scroll to , then press Settings SELECT twice.
3. Scroll to choose , or English Français
Español.
4. Press SELECT twice to save your setting.
Set date and time
1. Press MENU on the handset when not in use.
2. Scroll to and then press Set date/time
SELECT.
3. Use the dialing keys ( ) to enter the month 0-9
( ), date ( ) and year ( ). Then press MM DD YY
SELECT.
4. Use the dialing keys ( ) to enter the hour 0-9
( ) and minute ( ). Then press HH MM
or
to
choose AM or .PM
5. Press SELECT.
Temporary tone dialing
If you have pulse (rotary) service only, you
can switch from pulse to touch-tone dialing
temporarily during a call.
1. During a call, press .TONE
2. Use the dialing keys to enter the relevant
number. The telephone sends touch-tone
signals. It automatically returns to pulse dialing
mode after you end the call.
Telephone operations Make a call
• , and then dial the telephone number.Press
Answer a call
• or any of the dialing keys.Press
End a call:
• or put the handset back in the Press OFF
telephone base or charger.
Volume
• During a call, press or to adjust VOL- VOL+
the listening volume.
Mute
The mute function allows you to hear the other party
but the other party cannot hear you.
1. During a call, press . The handset MUTE
displays Muted.
2. again to resume the Press MUTE
conversation. The handset displays
Microphone on briefly.
Call waiting
When you subscribe to call waiting service from
your telephone service provider, you hear an alert
tone if there is an incoming call while you are
already on a call.
• to put the current call on hold Press FLASH
and take the new call.
• at any time to switch back and Press FLASH
forth between calls.
Find handset
Use this feature to find the system handset.
To start paging:
• Press /FIND HANDSET on the telephone
base when not in use. All idle handsets ring
and display ** Paging **.
To end paging:
• Press /FIND HANDSET at the telephone
base.
-OR-
• or any of the dialing keys on the Press
handset.
NOTE
• Do not press and hold for /FIND HANDSET
more than four seconds. It may lead to handset
deregistration.
Redial list
Each handset stores the last five telephone
numbers dialed. When there are already five
entries, the oldest entry is deleted to make room
for the new entry.
Review and dial a redial list entry
1. Press REDIAL when the handset is not in use.
2. Press , or repeatedly until the REDIAL
desired entry displays.
3. Press to dial.
Delete a redial list entry
• When the desired redial entry displays, press
DELETE.
Directory
The directory can store up to 30 entries, which are
shared by all handsets. Each entry may consist of
a telephone number up to 30 digits, and a name
up to 15 characters.
Add a directory entry
1. Enter the number when the phone is not in
use. Press MENU, then go to Step 3.
-OR-
Press MENU when the phone is not in use,
then press SELECT to choose Directory.
Press SELECT again to choose .Add contact
2. Use the dialing keys to enter the number.
-OR-
Copy a number from the redial list by pressing
REDIAL and then press , or REDIAL
repeatedly to select a number. Press SELECT
to copy the number.
3. to move on to enter the name.Press SELECT
4. Use the dialing keys to enter the name.
Additional key presses show other characters
of that particular key.
5. Press SELECT to save.
While entering names and numbers, you can:
• to backspace and erase a digit Press DELETE
or character.
• Press and hold to erase the entire DELETE
entry.
• or to move the cursor to the left or Press
right.
• Press and hold to insert a dialing PAUSE
pause (for entering numbers only).
• Press 0 to add a space (for entering names
only).
Review a directory entry
Entries are sorted alphabetically.
1. Press when the phone is not in use.
2. Scroll to browse through the directory, or use the
dialing keys to start a name search.
Delete a directory entry
1. When the desired entry displays, press
DELETE.
2. When the handset displays Delete contact?,
press SELECT.
Edit a directory entry
1. When the desired entry displays, press
SELECT.
2. Use the dialing keys to edit the number, then
press SELECT.
3. Use the dialing keys to edit the name, then
press SELECT.
Dial a directory entry
• When the desired entry appears, press to
dial.
Caller ID
If you subscribe to caller ID service, information
about each caller appears after the first or
second ring. If you answer a call before the caller
information appears on the screen, it will not be
saved in the caller ID log.
The caller ID log stores up to 30 entries. Each
entry has up to 24 digits for the phone number
and 15 characters for the name.
If the telephone number has more that 15
digits, only the last 15 digits appear. If the name
has more than 15 characters, only the first 15
characters are shown and saved in the caller ID
log.
Review a caller ID log entry
1. Press CID when the phone is not in use.
2. Scroll to browse through the caller ID log.
Missed call indicator
When there are calls that have not been reviewed
in the caller ID log, the handset displays
XX missed calls.
Each time you review a caller ID log entry marked
, the number of missed calls decreases by
one.
Abridged user’s manual
(Canada version)
Telephones identified with this
logo have reduced noise and
interference when used with most
T-coil equipped hearing aids and
cochlear implants. The TIA-1083
Compliant Logo is a trademark of
the Telecommunications Industry
Association. Used under license.
T
Compatible with
Hearing d T-CoilAi
TIA-1083
Congratulations
on purchasing your new VTech product. Before
using this telephone, please read Important
safety instructions.
This abridged user’s manual provides you with
basic installation and use instructions. A limited
set of features are described in abbreviated form.
Please refer to the online user’s manual for a full
set of installation and operation instructions at
www.vtechcanada.com.
CS6114
CS6114-11
CS6114-2
CS6114-21
DECT 6.0 cordless telephone
Go to www.vtechcanada.com
for the latest VTech product news.
1 set for
CS6114/
CS6114-11;
2 sets for
CS6114-2/
CS6114-21
1 set for CS6114-2/CS6114-21
THIS SIDE UP
Abridged
user’s
manual
Handset control key panel:
CANCEL
When you have reviewed all the missed calls, the
missed call indicator no longer displays.
If you do not want to review the missed calls
one by one, press and hold on the idle CANCEL
handset to erase the missed call indicator. All the
entries are then considered old.
Dial a caller ID log entry
• When the desired entry appears, press to
dial.
Save a caller ID log entry to the directory
1. When the desired caller ID log entry displays,
press SELECT.
2. Use the dialing keys to modify the number, if
necessary. Then press SELECT.
3. Use the dialing keys to modify the name, if
necessary. Then press SELECT.
Delete the caller ID log entries
• When the desired caller ID log entry displays,
press DELETE.
To delete all caller ID log entries:
1. Press MENU when the phone is not in use.
2. Scroll to and then press Caller ID log SELECT.
3. Scroll to Del all calls then press SELECT
twice.
Sound settings
Key tone
You can turn the key tone on or off.
1. Press MENU when the handset is not in use.
2. Scroll to and then press Settings SELECT.
3. Scroll to choose , then press Key tone
SELECT.
4. Press or to choose or On Off, then press
SELECT to save.
Ringer tone
You can choose from different ringer tones for
each handset.
1. Press MENU when the handset is not in use.
2. Scroll to and then press Ringers SELECT.
3. Scroll to choose , then press Ringer tone
SELECT.
4. Press or to sample each ringer tone, then
press SELECT to save.
NOTE
• If you turn off the ringer volume, you will not hear
ringer tone samples.
Ringer volume
You can adjust the ringer volume level, or turn the
ringer off.
1. Press MENU when the handset is not in use.
2. Scroll to and then press Ringers SELECT
twice.
3. to sample each volume level, Press or
then press SELECT to save.
NOTE
• When the ringer volume is set to Off, the handset
still rings when you press at the /FIND HANDSET
telephone base.
Temporary ringer silencing
When the telephone is ringing, you can
temporarily silence the ringer without
disconnecting the call. The next call rings
normally at the preset volume.
To silence the handset ringer:
• or . The handset Press CANCEL MUTE
displays Ringer muted.
Retrieve voicemail from telephone
service
Voicemail is a feature available from most
telephone service providers. It may be included
with your telephone service, or may be optional.
Fees may apply.
Retrieve voicemail
When you received a voicemail, the handset
displays and . To retrieve, New voicemail
you typically dial an access number provided by
your telephone service provider, and then enter
a security code. Contact your telephone service
provider for instructions on how to configure the
voicemail settings and listen to messages.
NOTE
• After you have listened to all new voicemail
messages, the indicators on the handset turn off
automatically.
Turn off the new voicemail indicators
If you have retrieved your voicemail while away
from home, and the handset still displays the new
voicemail indicators, use this feature to turn off
the indicators.
NOTE
• This feature turns off the indicators only, it does not
delete your voicemail messages.
1. Press MENU when the phone is not in use.
2. Scroll to and then press Settings SELECT.
3. Scroll to and then press Clr voicemail
SELECT.
4. Press SELECT again to confirm.
Register a handset
When your handset is deregistered from the
telephone base, follow the steps below to register
it back to the telephone base.
1. Remove the handset from the telephone base.
2. Press and hold at the /FIND HANDSET
telephone base for about four seconds until
the IN USE light turns on.
3. on the handset. It displays Then press #
Registering...
The handset show and you hear a Registered
beep when the registration process completes.
The registration process takes about 60 seconds
to complete.
General product care
Taking care of your telephone
Your cordless telephone contains sophisticated
electronic parts, so it must be treated with care.
Avoid rough treatment
Place the handset down gently. Save the original
packing materials to protect your telephone if you
ever need to ship it.
Avoid water
Your telephone can be damaged if it gets wet.
Do not use the handset outdoors in the rain,
or handle it with wet hands. Do not install the
telephone base near a sink, bathtub or shower.
Electrical storms
Electrical storms can sometimes cause power
surges harmful to electronic equipment. For your
own safety, take caution when using electrical
appliances during storms.
Cleaning your telephone
Your telephone has a durable plastic casing that
should retain its luster for many years. Clean it
only with a dry non-abrasive cloth. Do not use
dampened cloth or cleaning solvents of any kind.
Frequently asked questions
Below are the questions most frequently asked
about the cordless telephone. If you cannot find
the answer to your question, visit our website at
www.vtechcanada.com or call 1 (800) 267-7377
for customer service.
My telephone
does not work
at all.
Make sure the telephone
base is installed properly,
and battery is installed
and charged correctly. For
optimum daily performance,
return the handset to the
telephone base after use.
The display
shows . No line
I cannot hear the
dial tone.
Disconnect the telephone
line cord from your
telephone and connect it to
another telephone. If there
is no dial tone on that other
telephone either, then the
telephone line cord may be
defective. Try installing a
new telephone line cord.
If changing the telephone
line cord does not help,
the wall jack (or the wiring
to this wall jack) may be
defective. Contact your
telephone service provider.
You may be using a new
cable or VoIP service, the
existing telephone jacks in
your home may no longer
work. Contact your service
provider for solutions.
I accidentally
set my LCD
language to
Spanish or
French, and I
don’t know how
to change it back
to English.
While the handset is not
in use, press and MENU
then enter to change 364#
the handset LCD language
back to English.
Important safety instructions
When using your telephone equipment, basic
safety precautions should always be followed to
reduce the risk of fire, electric shock and injury,
including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked on
the product.
3. Unplug this product from the wall outlet before
cleaning. Do not use liquid or aerosol cleaners.
Use a damp cloth for cleaning.
4. Do not use this product near water such as
near a bath tub, wash bowl, kitchen sink,
laundry tub or a swimming pool, or in a wet
basement or shower.
5. Do not place this product on an unstable table,
shelf, stand or other unstable surfaces.
6. Avoid placing the telephone system in places
with extreme temperature, direct sunlight, or
other electrical devices. Protect your phone
from moisture, dust, corrosive liquids and
fumes.
7. Slots and openings in the back or bottom of the
telephone base and handset are provided for
ventilation. To protect them from overheating,
these openings must not be blocked by placing
the product on a soft surface such as a bed,
sofa or rug. This product should never be
placed near or over a radiator or heat register.
This product should not be placed in any area
where proper ventilation is not provided.
8. This product should be operated only from the
type of power source indicated on the marking
label. If you are not sure of the type of power
supply in your home or office, consult your
dealer or local power company.
9. Do not allow anything to rest on the power
cord. Do not install this product where the cord
may be walked on.
10. Never push objects of any kind into this
product through the slots in the telephone base
or handset because they may touch dangerous
voltage points or create a short circuit. Never
spill liquid of any kind on the product.
11. To reduce the risk of electric shock, do
not disassemble this product, but take it to
an authorized service facility. Opening or
removing parts of the telephone base or
handset other than specified access doors may
expose you to dangerous voltages or other
risks. Incorrect reassembling can cause electric
shock when the product is subsequently used.
12. Do not overload wall outlets and extension
cords.
13. Unplug this product from the wall outlet and
refer servicing to an authorized service facility
under the following conditions:
• When the power supply cord or plug is
damaged or frayed.
• If liquid has been spilled onto the product.
• If the product has been exposed to rain or
water.
• If the product does not operate normally by
following the operating instructions. Adjust
only those controls that are covered by the
operation instructions. Improper adjustment
of other controls may result in damage
and often requires extensive work by an
authorized technician to restore the product
to normal operation.
• If the product has been dropped and the
telephone base and/or handset has been
damaged.
• If the product exhibits a distinct change in
performance.
14. Avoid using a telephone (other than cordless)
during an electrical storm. There is a remote
risk of electric shock from lightning.
15. Do not use the telephone to report a gas
leak in the vicinity of the leak. Under certain
circumstances, a spark may be created when
the adapter is plugged into the power outlet, or
when the handset is replaced in its cradle. This
is a common event associated with the closing
of any electrical circuit. The user should not
plug the phone into a power outlet, and should
not put a charged handset into the cradle,
if the phone is located in an environment
containing concentrations of flammable or
flame-supporting gases, unless there is
adequate ventilation. A spark in such an
environment could create a fire or explosion.
Such environments might include: medical
use of oxygen without adequate ventilation;
industrial gases (cleaning solvents; gasoline
vapors; etc.); a leak of natural gas; etc.
16. Only put the handset of your telephone next to
your ear when it is in normal talk mode.
17. The power adapter is intended to be correctly
oriented in a vertical or floor mount position.
The prongs are not designed to hold the plug
in place if it is plugged into a ceiling, under-the-
table or cabinet outlet.
SAVE THESE INSTRUCTIONS
Battery
• Use only the battery provided or equivalent.
To order a replacement, visit our website at
www.vtechcanada.com or call
1 (800) 267-7377.
• Do not dispose of the battery in a fire. Check
with local waste management codes for
special disposal instructions.
• Do not open or mutilate the battery. Released
electrolyte is corrosive and may cause burns
or injury to the eyes or skin. The electrolyte
may be toxic if swallowed.
• Exercise care in handling batteries in order
not to create a short circuit with conductive
materials.
• Charge the battery provided with or identified
for use with this product only in accordance
with the instructions and limitations specified
in this manual.
Precautions for users of implanted cardiac
pacemakers
Cardiac pacemakers (applies only to digital
cordless telephones):
Wireless Technology Research, LLC (WTR),
an independent research entity, led a
multidisciplinary evaluation of the interference
between portable wireless telephones and
implanted cardiac pacemakers. Supported by
the U.S. Food and Drug Administration, WTR
recommends to physicians that:
Pacemaker patients
• Should keep wireless telephones at least six
inches from the pacemaker.
• Should NOT place wireless telephones directly
over the pacemaker, such as in a breast
pocket, when it is turned ON.
• Should use the wireless telephone at the ear
opposite the pacemaker.
WTR’s evaluation did not identify any risk to
bystanders with pacemakers from other persons
using wireless telephones.
About cordless telephones
• Privacy: The same features that make a
cordless telephone convenient create some
limitations. Telephone calls are transmitted
between the telephone base and the
cordless handset by radio waves, so there
is a possibility that the cordless telephone
conversations could be intercepted by radio
receiving equipment within range of the
cordless handset. For this reason, you should
not think of cordless telephone conversations
as being as private as those on corded
telephones.
• Electrical power: The telephone base of this
cordless telephone must be connected to a
working electrical outlet. The electrical outlet
should not be controlled by a wall switch. Calls
cannot be made from the cordless handset if
the telephone base is unplugged, switched off
or if the electrical power is interrupted.
• Potential TV interference: Some cordless
telephones operate at frequencies that may
cause interference to televisions and VCRs.
To minimize or prevent such interference, do
not place the telephone base of the cordless
telephone near or on top of a TV or VCR.
If interference is experienced, moving the
cordless telephone farther away from the
TV or VCR often reduces or eliminates the
interference.
• Rechargeable batteries: Exercise care in
handling batteries in order not to create a short
circuit with conducting material such as rings,
bracelets and keys. The battery or conductor
may overheat and cause harm. Observe
proper polarity between the battery and the
battery charger.
• Nickel-metal hydride rechargeable
batteries: Dispose of these batteries in a safe
manner. Do not burn or puncture the battery.
Like other batteries of this type, if burned or
punctured, they could release caustic material
which could cause injury.
The RBRC® seal
The RBRC® seal on the nickel-metal hydride
battery indicates that VTech Communications,
Inc. is voluntarily participating in an industry
program to collect and recycle these batteries at
the end of their useful lives, when taken out of
service within the United States and Canada.
The RBRC® program provides a convenient
alternative to placing used nickel-metal hydride
batteries into the trash or municipal waste, which
may be illegal in your area.
VTech’s participation in RBRC® makes it easy
for you to drop off the spent battery at local
retailers participating in the RBRC® program or
at authorized VTech product service centers.
Please call 1 (800) 8 BATTERY
® for information
on Ni-MH battery recycling and disposal bans/
restrictions in your area. VTech’s involvement
in this program is part of its commitment to
protecting our environment and conserving
natural resources.
RBRC® and 1 (800) 8 BATTERY
® are registered
trademarks of Rechargeable Battery Recycling
Corporation.
FCC, ACTA and IC regulations
FCC Part 15
This equipment has been tested and found
to comply with the requirements for a Class
B digital device under Part 15 of the Federal
Communications Commission (FCC) rules. These
requirements are intended to provide reasonable
protection against harmful interference in a
residential installation. This equipment generates,
uses and can radiate radio frequency energy
and, if not installed and used in accordance with
the instructions, may cause harmful interference
to radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
Changes or modifications to this equipment not
expressly approved by the party responsible for
compliance could void the user’s authority to
operate the equipment.
This device complies with Part 15 of the FCC
rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept
any interference received, including interference
that may cause undesired operation. Privacy of
communications may not be ensured when using
this telephone.
To ensure safety of users, the FCC has
established criteria for the amount of radio
frequency energy that can be safely absorbed by a
user or bystander according to the intended usage
of the product. This product has been tested and
found to comply with the FCC criteria. The handset
may be safely held against the ear of the user. The
telephone base shall be installed and used such
that parts of the user’s body other than the hands
are maintained at a distance of approximately 20
cm (8 inches) or more.
This Class B digital apparatus complies with
Canadian requirement:
CAN ICES-3 (B)/NMB-3(B).
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC
rules and with technical requirements adopted
by the Administrative Council for Terminal
Attachments (ACTA). The label on the back
or bottom of this equipment contains, among
other things, a product identifier in the format
US:AAAEQ##TXXXX. This identifier must be
provided to your telephone service provider upon
request.
The plug and jack used to connect this equipment
to premises wiring and the telephone network
must comply with applicable Part 68 rules and
technical requirements adopted by ACTA. A
compliant telephone cord and modular plug is
provided with this product. It is designed to be
connected to a compatible modular jack that is
also compliant. An RJ11 jack should normally be
used for connecting to a single line and an RJ14
jack for two lines. See the installation instructions
in the user’s manual.
The Ringer Equivalence Number (REN) is used
to determine how many devices you may connect
to your telephone line and still have them ring
when you are called. The REN for this product is
encoded as the 6th and 7th characters following
the US: in the product identifier (e.g., if ## is 03,
the REN is 0.3). In most, but not all areas, the
sum of all RENs should be five (5.0) or less. For
more information, please contact your telephone
service provider.
This equipment may not be used with Party
Lines. If you have specially wired alarm dialing
equipment connected to your telephone line,
ensure the connection of this equipment
does not disable your alarm equipment. If you
have questions about what will disable alarm
equipment, consult your telephone service
provider or a qualified installer.
If this equipment is malfunctioning, it must
be unplugged from the modular jack until the
problem has been corrected. Repairs to this
telephone equipment can only be made by the
manufacturer or its authorized agents. For repair
procedures, follow the instructions outlined under
the Limited warranty.
If this equipment is causing harm to the telephone
network, the telephone service provider may
temporarily discontinue your telephone service.
The telephone service provider is required to
notify you before interrupting service. If advance
notice is not practical, you will be notified as soon
as possible. You will be given the opportunity to
correct the problem and the telephone service
provider is required to inform you of your right
to file a complaint with the FCC. Your telephone
service provider may make changes in its
facilities, equipment, operation, or procedures
that could affect the proper functioning of
this product. The telephone service provider
is required to notify you if such changes are
planned.
If this product is equipped with a corded or
cordless handset, it is hearing aid compatible.
If this product has memory dialing locations,
you may choose to store emergency telephone
numbers (e.g., police, fire, medical) in these
locations. If you do store or test emergency
numbers, please:
Remain on the line and briefly explain the reason
for the call before hanging up.
Perform such activities in off-peak hours, such as
early morning or late evening.
Industry Canada
This device complies with Industry Canada
licence-exempt RSS standard(s).
Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept
any interference, including interference that may
cause undesired operation.
The term ‘’IC:‘’ before the certification/registration
number only signifies that the Industry Canada
technical specifications were met.
The Ringer Equivalence Number (REN) for
this terminal equipment is 1.0. The REN is an
indication of the maximum number of devices
allowed to be connected to a telephone interface.
The termination on an interface may consist of
any combination of devices subject only to the
requirement that the sum of the RENs of all the
devices does not exceed five.
This product meets the applicable Industry
Canada technical specifications.
Limited warranty
What does this limited warranty cover?
The manufacturer of this VTech Product warrants
to the holder of a valid proof of purchase
(“Consumer” or “you”) that the Product and
all accessories provided in the sales package
(“Product”) are free from defects in material and
workmanship, pursuant to the following terms
and conditions, when installed and used normally
and in accordance with the Product operating
instructions. This limited warranty extends only to
the Consumer for Products purchased and used
in the United States of America and Canada.
What will VTech do if the Product is not free
from defects in materials and workmanship
during the limited warranty period (“Materially
Defective Product”)?
During the limited warranty period, VTech’s
authorized service representative will repair
or replace at VTech’s option, without charge,
a Materially Defective Product. If we repair
the Product, we may use new or refurbished
replacement parts. If we choose to replace
the Product, we may replace it with a new or
refurbished Product of the same or similar
design. We will retain defective parts, modules, or
equipment. Repair or replacement of the Product,
at VTech’s option, is your exclusive remedy.
VTech will return the repaired or replacement
Products to you in working condition. You
should expect the repair or replacement to take
approximately 30 days.
How long is the limited warranty period?
The limited warranty period for the Product
extends for ONE (1) YEAR from the date
of purchase. If VTech repairs or replaces a
Materially Defective Product under the terms of
this limited warranty, this limited warranty also
applies to the repaired or replacement Product
for a period of either (a) 90 days from the date the
repaired or replacement Product is shipped to you
or (b) the time remaining on the original one-year
warranty; whichever is longer.
What is not covered by this limited warranty?
This limited warranty does not cover:
1. Product that has been subjected to misuse,
accident, shipping or other physical damage,
improper installation, abnormal operation or
handling, neglect, inundation, fire, water or other
liquid intrusion;
2. Product that has been damaged due to repair,
alteration or modification by anyone other than
an authorized service representative of VTech;
3. Product to the extent that the problem
experienced is caused by signal conditions,
network reliability, or cable or antenna systems;
4. Product to the extent that the problem is caused
by use with non-VTech accessories;
5. Product whose warranty/quality stickers,
product serial number plates or electronic
serial numbers have been removed, altered or
rendered illegible;
6. Product purchased, used, serviced, or shipped
for repair from outside the United States of
America or Canada, or used for commercial or
institutional purposes (including but not limited
to Products used for rental purposes);
7. Product returned without a valid proof of
purchase (see item 2 below); or
8. Charges for installation or set up, adjustment of
customer controls, and installation or repair of
systems outside the unit.
How do you get warranty service?
To obtain warranty service our website , please visit
at www.vtechcanada.com or call
1 (800) 267-7377.
NOTE: Before calling for service, please review the
user’s manual - a check of the Product’s controls
and features may save you a service call.
Except as provided by applicable law, you assume
the risk of loss or damage during transit and
transportation and are responsible for delivery
or handling charges incurred in the transport of
the Product(s) to the service location. VTech
will return repaired or replaced Product under
this limited warranty. Transportation, delivery or
handling charges are prepaid. VTech assumes no
risk for damage or loss of the Product in transit.
If the Product failure is not covered by this limited
warranty, or proof of purchase does not meet the
terms of this limited warranty, VTech will notify you
and will request that you authorize the cost of repair
prior to any further repair activity. You must pay for
the cost of repair and return shipping costs for the
repair of Products that are not covered by this limited
warranty.
What must you return with the Product to get
warranty service?
1. Return the entire original package and
contents including the Product to the VTech
service location along with a description of the
malfunction or difficulty; and
2. Include a “valid proof of purchase” (sales
receipt) identifying the Product purchased
(Product model) and the date of purchase or
receipt; and
3. Provide your name, complete and correct
mailing address, and telephone number.
Other limitations
This warranty is the complete and exclusive
agreement between you and VTech. It supersedes
all other written or oral communications
related to this Product. VTech provides no
other warranties for this Product. The warranty
exclusively describes all of VTech’s responsibilities
regarding the Product. There are no other
express warranties. No one is authorized to make
modifications to this limited warranty and you
should not rely on any such modification.
State/Provincial Law Rights: This warranty gives
you specific legal rights, and you may also have
other rights, which vary from state to state or
province to province.
Limitations: Implied warranties, including those of
fitness for a particular purpose and merchantability
(an unwritten warranty that the Product is fit for
ordinary use) are limited to one year from the date
of purchase. Some states/provinces do not allow
limitations on how long an implied warranty lasts,
so the above limitation may not apply to you. In no
event shall VTech be liable for any indirect, special,
incidental, consequential, or similar damages
(including, but not limited to lost profits or revenue,
inability to use the Product or other associated
equipment, the cost of substitute equipment, and
claims by third parties) resulting from the use
of this Product. Some states/provinces do not
allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or
exclusion may not apply to you.
Please retain your original sales receipt
as proof of purchase.
Technical specifications
Frequency
control
Crystal controlled PLL synthesizer
Transmit
frequency
1921.536-1928.448 MHz
Channels 5
Nominal
effective
range
Maximum power allowed by
FCC and IC. Actual operating
range may vary according to
environmental conditions at the
time of use.
Power
requirements
Handset: 2.4V Ni-MH battery
Telephone base: 6V AC @ 300mA
Charger: 6V AC @ 300mA
Memory Directory:
30 memory locations;
up to 30 digits and 15 characters
Caller ID log:
30 memory locations;
up to 24 digits and 15 characters
VTech Technologies Canada Ltd.
A member of THE VTECH GROUP OF COMPANIES.
VTech is a registered trademark of VTech Holdings Limited.
Specifications are subject to change without notice.
© 2017 VTech Technologies Canada Ltd.
All rights reserved. 03/17. CS6114-X_CA_ACIB_V12.0
Document order number: 91-006295-070-100
Designed to fit your home.
And your life.
Handset control key panel:
CANCEL
Tuotetiedot
| Merkki: | VTech |
| Kategoria: | Puhelin |
| Malli: | CS6114 |
Tarvitsetko apua?
Jos tarvitset apua merkille VTech CS6114 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Puhelin VTech Käyttöohjeet
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
14 Joulukuuta 2024
Puhelin Käyttöohjeet
- Puhelin Philips
- Puhelin AEG
- Puhelin Xiaomi
- Puhelin Panasonic
- Puhelin Roland
- Puhelin FlyingVoice
- Puhelin Lewitt
- Puhelin Jabra
- Puhelin Alcatel
- Puhelin Primare
- Puhelin Profoon
- Puhelin Vogtec
- Puhelin ClearOne
- Puhelin Ranex
- Puhelin HTC
Viimeisimmät Puhelin Käyttöohjeet
12 Joulukuuta 2024
12 Joulukuuta 2024
11 Joulukuuta 2024
7 Joulukuuta 2024
6 Joulukuuta 2024
6 Joulukuuta 2024
26 Lokakuuta 2024
22 Lokakuuta 2024
21 Lokakuuta 2024
18 Lokakuuta 2024