Whirlpool SW8 AM2C XAR Käyttöohje

Whirlpool Jääkaappi SW8 AM2C XAR

Lue alta 📖 käyttöohje suomeksi merkille Whirlpool SW8 AM2C XAR (3 sivua) kategoriassa Jääkaappi. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Lataa PDF
Sivu 1/3
EN
Quick guide
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT
In order to receive a more complete assistance, please
register your product on www . whirlpool . eu/ register
Before using the appliance carefully read the Safety
Instruction.
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting the
appliance to the power supply.
Connect the appliance to the power supply and turn the thermostat
knob to switch on the appliance.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available).
CONTROL PANEL
1. On/standby
2. Temperature display
3. Fast cool button
4. Alarm indicator
5. Temperature button
6. 6th sense fresh control
4.
5.
1. 3.2.6.
ON/STANDBY
To put the product in Stand-by, press and hold the button for 3
seconds. All the icons turn o except On/Standby indicator . To
reactivate the appliance press once (briey) this button. (seethe
Instructions for Use)
FAST COOL BUTTON
Using Fast Cool function it is possible to increase the cooling
capacity in the refrigerator compartment. The use of this function
is recommended when placing a very high quantity of food in the
refrigerator compartment. Press the Fast Cool button to activate
Fast Cool function. When activated, the Fast Cool indicator turns on.
The function is automatically disabled after 6 hours, or can be manually
disabled by pressing Fast Cool button again.
STOP ALARM BUTTON
Press in case of alarm to mute the acoustic alarm.
TEMPERATURE BUTTON
Press the temperature button to change the temperature: thevalue
changes cyclically between 8°C ad 2°C.
Note: Displayed set points correspond to the average temperature
throughout the whole refrigerator.
6TH SENSE FRESH CONTROL
This function automatically works to ensure the optimal conditions to
preserve the stored food. To deactivate the “6thSense Fresh Control”,
press and hold Fast Cool and Stop Alarm buttons at the same
time for 3seconds until an audible signal sounds and “6th Sense Fresh
Control” icon turns o as conrmation that the feature has been
deactivated. To reactivate this function repeat the same procedure.
Note: Deactivation of the function switch-o the FAN in the fridge.
FAN
The Fan improves temperature distribution inside the product,
allowing better preservation of stored food. By default, the fan is
switched on. To switch o the FAN press and hold Fast Cool and
Stop alarm buttons at the same time for 3 seconds until an audible
signal sounds and “6th Sense Fresh Control” icon will turn o as
conrmation that the fan has been switched o. To switch on the FAN
repeat the same procedure. As a conrmation audible signal sounds
and the icon turns on.
Note: Reasons why switch o the fan look for “ENERGY-SAVING TIPS” in the
Instructions for Use.
VACATION BUTTON
This function can be activated to reduce the energy consumption of
the appliance during a prolonged period of time.
Before activating the feature, all perishable food should be removed
from the refrigeration compartment and make sure that the door
is closed properly, since the refrigerator will maintain asuitable
temperature to prevent the formation of unpleasant odors (+12°C). To
activate/ deactivate press the Vacation mode button for 3 seconds.
When the function is enabled, the related symbol will light up
and the temperature of the refrigerator compartment will be set
to a higher setpoint (thetemperature display will show the new
temperature setpoint of +12°C). Changing the temperature setpoint
will automatically deactivate the function.
HOW TO STORE FOOD AND BEVERAGE
X X
Legend
FREEZER ZONE
TEMPERATE ZONE
Suggested for the storage of tropical fruit, cans, drinks,
eggs, sauces, pickles, butter, jam
COOL ZONE
Suggested for the storage of cheese, milk, daily food,
delicatessen, yogurt
COOLEST ZONE
Suggested for the storage of cold cuts, desserts, sh and
meat
FRUIT & VEGETABLE DRAWER
ZERO DEGREES DRAWER*
The Zero Degrees Drawer is specically designed to maintain a low
temperature and a suitable humidity level, in order to keep foods
fresher for longer (e.g. meat, sh, fruit and winter vegetables).
ACTIVATING AND DEACTIVATING THE BOX
To activate / deactivate the box, press the
button as illustrated in the gure.
When the box has been activated, the
symbol lights up.
The temperature inside the box, when active, is approximately 0°. The
following factors are vital for the “Zero Degrees” box to work properly:
• the refrigerator compartment must be switched on
• the temperature of the refrigerator compartment must be
between +2°C and +5°C
• the box must be inserted to enable activation
• no special functions must have been selected (Standby, Vacation –
where applicable).
If one of these special functions has been selected, the “Zero Degrees”
box must be deactivated manually, and any fresh food inside it
removed. If manual deactivation does not take place, the box will be
deactivated automatically after 8 hours.
Note:
-if the symbol does not light up when the function is activated, check
that the drawer is properly inserted; if the problem persists, contact
your nearest authorized After-sales Service
-if the function is active and the drawer open, the symbol on the
control panel may be deactivated automatically. If the drawer is
inserted, the symbol will become active again
-irrespective of the state of the function, a slight noise may be heard:
this is normal and is not a cause for concern.
-when the function is not active, the temperature in the drawer
depends on the general temperature inside the refrigerator.
In this case, we recommend it is used to store fruit and vegetables which
are not sensitive to cold temperatures (fruits of the forest, apples, apricots,
carrots, spinach, lettuce, etc.).
Important: when the function is activated and there are foodstus with
a high water content, condensation may form on shelves. In this case,
disable the function temporarily.
TROUBLESHOOTING
What to do if... Possible reasons Solutions
The appliance doesn’t work. There may be an appliance power
supply problem.
Make sure:
• there is not a power failure;
• the plug is properly inserted in the power socket and the double-
pole switch (if present) is in the correct position (on);
• the household electrical system protection devices function;
• the power cable is not broken;
The inside light does not
work.
It may be necessary to replace the light
bulb.
Disconnect the appliance from the power supply and contact the
Technical Assistance Service if you need a replacement.
The internal temperature
of the compartments is not
cold enough.
The reasons could vary (see “Solution”)
column.
Check that:
• the doors are closed properly;
• the appliance is not installed near a heat source;
• the temperature is appropriately set;
• the circulation of air through the ventilation grilles on the base of
the appliance is not obstructed.
There is water on the
bottom of the refrigerator
compartment.
The defrost water drain is blocked. Clean the defrosting water drain (see section “Cleaning and
Maintenance").
The front edge of the
appliance that the door
gaskets seal against is hot.
This is not a problem. It prevents
condensation from forming.
A solution is not needed.
The temperature of the
refrigerator compartment is
too cold.
• The set temperature is too cold. • Try to set a less cold temperature.
• Turn o the fan (if present) described in the paragraph “FAN”.
19515445500
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
• Visiting our website docs . whirlpool . eu
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product's identication
plate.

Tuotetiedot

Merkki: Whirlpool
Kategoria: Jääkaappi
Malli: SW8 AM2C XAR

Tarvitsetko apua?

Jos tarvitset apua merkille Whirlpool SW8 AM2C XAR esitä kysymys alla ja muut käyttäjät vastaavat sinulle


Jääkaappi Whirlpool Käyttöohjeet

Whirlpool

Whirlpool WHD2 6473 X5E Käyttöohje

8 Huhtikuuta 2025
Whirlpool

Whirlpool WHD2 6472 X4E Käyttöohje

8 Huhtikuuta 2025
Whirlpool

Whirlpool ARG 7532 Käyttöohje

9 Maaliskuuta 2025
Whirlpool

Whirlpool ARG 8672 Käyttöohje

9 Maaliskuuta 2025
Whirlpool

Whirlpool WHC18D071A1 Käyttöohje

26 Helmikuuta 2025
Whirlpool

Whirlpool WHC20D011B1 Käyttöohje

26 Helmikuuta 2025
Whirlpool

Whirlpool WHLS 2131B4 Käyttöohje

26 Helmikuuta 2025
Whirlpool

Whirlpool WHSD18A021B1 Käyttöohje

26 Helmikuuta 2025
Whirlpool

Whirlpool WHSD18A013C2 Käyttöohje

26 Helmikuuta 2025
Whirlpool

Whirlpool WHC18 T514 Käyttöohje

15 Helmikuuta 2025

Jääkaappi Käyttöohjeet

Viimeisimmät Jääkaappi Käyttöohjeet

Daikin

Daikin LMDMD063AV3 Käyttöohje

9 Huhtikuuta 2025
Daikin

Daikin LREQ15BY1R Käyttöohje

9 Huhtikuuta 2025
Sharp

Sharp SJ-FTA03ITXLE-EU Käyttöohje

9 Huhtikuuta 2025
Liebherr

Liebherr IKGBN 51Vd23i Plus Käyttöohje

9 Huhtikuuta 2025
Miele

Miele K 7035 D Käyttöohje

8 Huhtikuuta 2025
Miele

Miele KU 7016 D Käyttöohje

8 Huhtikuuta 2025
Liebherr

Liebherr SKBBS 4210 Käyttöohje

7 Huhtikuuta 2025
Costway

Costway EP24436US Käyttöohje

4 Huhtikuuta 2025
Costway

Costway EP22756US Käyttöohje

4 Huhtikuuta 2025
Liebherr

Liebherr RO 510 Käyttöohje

3 Huhtikuuta 2025