Yamaha CTL-BN1 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Yamaha CTL-BN1 (17 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/17
CONTROLLER
CTL-BN1 Reference Manual
EN
CTL-BN1 Reference Manual
2
Introduction 3
About this product............................. ................. ........................................... ............................... ........3
Available utility software ................... ................................................. ..................................................3
Available manuals................................................................................................................................4
Product manuals ........................................................................................................................................... 4
Other related manuals .................................................................................................................................. 4
About this document........................................... ................................. ................................................4
Included items .....................................................................................................................................5
Items to prepare............................. ................................................. .....................................................5
Part names and functions 6
Part names ................................ ........................................................ ........................... ............. ..........6
Overview of functions that can be assigned to the button ...................................................................7
About operations/statuses of Preset Recall and Control Sets functions..............................................8
Connection diagram 9
Installing on a wall 10
Items to prepare............................. ................................................. ...................................................10
Installation procedure ........................................................................................................................10
Controlling with software 12
Appendix 13
Updating the firmware ......................................................................... ................................. .............13
Initializing the unit........................................ ................................. .....................................................14
General specifications .......................................................................................................................15
Assigned functions and related details ..............................................................................................16
Contents
CTL-BN1 Reference Manual
3
About this product
This programmable button controller is primarily intended for ADECIA devices.
It can be used as a mute button during meetings when placed on the desk or to switch between presets to suit the
purpose of the room.
Supports an Ethernet connection and PoE (Power over Ethernet)
This unit can be incorporated into digital audio network systems such as ADECIA.
Can accommodate devices other than ADECIA
In addition to controlling ADECIA devices (RM-CR, RM-CG, RM-TT, RM-WAP, VXL1-16P and VXC2P), this unit can
send control commands directly to other devices.
Supports multiple installation options
Instead of being installed on a desk, this unit can also be mounted on the wall of the room.
Available utility software
The following utility software can be used to set up and operate this unit according to its use and environment. For
information on what can be done with each software, refer to “Controlling with software” (page 12).
Introduction
RM-CR Device Manager Controls RM-CR as well as devices connected to RM-CR. It is used to register
CTL-BN1 with RM-CR or select commands to be sent from CTL-BN1 to RM-CR.
This software runs on a computer browser.
RM Device Finder This is application software for controlling ADECIA devices on the same network.
It detects the ADECIA devices on the network, displays the Device Manager for
each device, and updates firmware. In addition, it is used to select commands to
be sent from CTL-BN1 to RM-CG, RM-TT, RM-WAP, VXL1-16P or VXC2P, or to
program CTL-BN1 with control commands to be sent to other devices.

Tuotetiedot

Merkki: Yamaha
Kategoria: Ei luokiteltu
Malli: CTL-BN1

Tarvitsetko apua?

Jos tarvitset apua merkille Yamaha CTL-BN1 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Yamaha Käyttöohjeet

Yamaha

Yamaha CTL-BN1 Käyttöohje

17 Joulukuuta 2024
Yamaha

Yamaha BAG-STP100 Käyttöohje

4 Joulukuuta 2024

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet