AFX Callie CALP05WHLNR3 Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille AFX Callie CALP05WHLNR3 (1 sivua) kategoriassa Lamppu. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/1
E26 Bulb door Luminaires In
Ceiling Mount
120VAC / 60Hz
Page 1 of 1 R0 8061463
Part #: CALP05WH 3 LNR
Part #:
Limited Factory Warranty
AFX Inc. hereby warrants that this xture is free from defects in materials and workmanship when installed and used under normal operating conditions
for a period of 5 years from date of purchase. This warranty covers all component parts and extends only to replacement of defective xture or
components; it does not cover failure due to improper installation, misuse, mishandling or damage incurred in transit.
View shown for
reference only.
Individual models
may vary.
Safety Precautions
Read all safety precautions and installation instructions carefully before installing or servicing this xture. Failure to comply with these instructions could result in potentially fatal
electric shock and/or property damage.
is recommended that a qualied electrician perform all wiring. This xture must be wired in accordance with all national and local electrical codes. It
Do not handle any energized xture or attempt to energize any xture with wet hands or while standing on a wet or damp surface or in water.
This xture is designed for use in a 120 / 60Hz circuit. VAC
Make sure that the power source conforms to the requirements of the xture. (See labels on the xture housing).
To reduce the risk of electrical shock, and to assure proper operation, this xture must be adequately grounded. To accomplish proper grounding, there must be a separate ground
wire (green) contact between this xture and the ground connection of your main power supply panel.
This xture is intended to be used for general indoor lighting in dry or damp locations.
Assembly Instructions
Step 1 Preparing for installation–
A. at fuse or circuit breaker box before installing or servicing Disconnect electrical power
any part of this xture.
B. Carefully remove the xture from the carton, remove components from hardware kit.
C. Install the channel (1) to the junction box (not included) using two screws (2) to secure it.
D. Mark the locations of the four extra mounting holes on the ceiling. Take the channel (1)
down and punch a small hole into the ceiling at each location using a nail or an awl to see
if there is a wood joist. If there is a joist, use suitable wood screws (7) to mount the
channel (1). Where there is no joist to screw into, use a wall anchor (6) to mount pan
securely to the ceiling.
Step 2 Installing pendants –
A. Install pendant to the cover plate (3) by pulling cord through the canopy strain relief (4).
Tighten the strain relief screw when the cord is at the desired height. Repeat for each
pendant.
Note: Each co rd is 108” long.
B. Once all pendants are their desired height, group all of the black pendant wires at
together along with an extra ying single black lead wire. This single lead will be used to
connect to the power source in Step 3. Secure with wire nut (provided).
C. Repeat Step 2B for all white pendant wires.
Wiring All wiring must take place inside junction box (not included) –
Caution: Make sure power is o at fuse or circuit breaker box. Check power wires for
damage or scrapes. Use wire suitable for at least 90°C (194°F). Most dwellings Note:
built before 1985 have supply wire rated to 60°C. Consult a qualied electrician to ensure
correct branch circuit conductor before installing.
Step 3 Wiring xture –
A. Make all wire connections to appropriate wire. Secure with wire nuts (provided).
B. Connect the green wire from the xture to the supply source ground wire.
C. Connect the black wire from the pendants to the black (L) wire from supply power source.
D. Connect the white wire from the pendants to the white (N) wire from supply power source.
E. Pull on each wire lead to make sure connections are secure. Make Do not mix wires.
certain no bare wires are exposed outside of wire connectors. Tuck all connections neatly
into the junction box.
Step 4 Installing cover pla –te
A. Align the mounting holes on the xture plate with the two screws on the xture channel (1)
and use two nials (5) to secure it.
Step 5 Installing diusers –
A. Slide glass diuser (9) over the socket assembly (8) and use the fastener 0 to secure (1 )
the diuser in place. Note: Do not over tighten as it may cause chipping of the glass.
Step 6 Lamping –
A. Install medium base bulb (E26, 60W max not included) into each socket and turn clockwise until –
secured.
Step 7 Restore power at fuse or circuit breaker box –
Tuotetiedot
| Merkki: | AFX |
| Kategoria: | Lamppu |
| Malli: | Callie CALP05WHLNR3 |
Tarvitsetko apua?
Jos tarvitset apua merkille AFX Callie CALP05WHLNR3 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Lamppu AFX Käyttöohjeet
1 Tammikuuta 2025
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
15 Lokakuuta 2024
Lamppu Käyttöohjeet
- Lamppu Ledlenser
- Lamppu Hama
- Lamppu Neewer
- Lamppu Hazet
- Lamppu Philips
- Lamppu Topeak
- Lamppu Schwaiger
- Lamppu Godox
- Lamppu IKEA
- Lamppu Samsung
- Lamppu Sony
- Lamppu Xiaomi
- Lamppu Trust
- Lamppu Integral LED
- Lamppu Lutec
- Lamppu Golden Lighting
- Lamppu ET2
- Lamppu Quoizel
- Lamppu Crystorama
- Lamppu Brennenstuhl
- Lamppu Aputure
- Lamppu NEO Tools
- Lamppu Westinghouse
- Lamppu Schneider
- Lamppu Dainolite
- Lamppu EMOS
- Lamppu Nanlite
- Lamppu Cameo
- Lamppu BeamZ
- Lamppu Livoo
- Lamppu Steinel
- Lamppu Maxim
- Lamppu Nordlux
- Lamppu Brandson
- Lamppu NUVO
- Lamppu Maginon
- Lamppu Sonneman
- Lamppu Elgato
- Lamppu Ansmann
- Lamppu Makita
- Lamppu Intermatic
- Lamppu V-Tac
- Lamppu JBL
- Lamppu Nedis
- Lamppu Elation
- Lamppu Fredrick Ramond
- Lamppu Chauvet
- Lamppu Karma
- Lamppu Ridem
- Lamppu Dedra
- Lamppu Black Diamond
- Lamppu Powerplus
- Lamppu BenQ
- Lamppu Hansa
- Lamppu Livarno Lux
- Lamppu Eurolite
- Lamppu Casalux
- Lamppu Beghelli
- Lamppu American DJ
- Lamppu Profoto
- Lamppu Claypaky
- Lamppu Petzl
- Lamppu Gravity
- Lamppu Ikan
- Lamppu AVM
- Lamppu Olight
- Lamppu Honeywell
- Lamppu Theben
- Lamppu Vimar
- Lamppu Genaray
- Lamppu Physa
- Lamppu Altman
- Lamppu Setti+
- Lamppu Kanlux
- Lamppu Xline
- Lamppu ARRI
- Lamppu Osram
- Lamppu Savio
- Lamppu Bresser
- Lamppu Currey & Company
- Lamppu Deko-Light
- Lamppu Cateye
- Lamppu Zhiyun
- Lamppu Angler
- Lamppu ColorKey
- Lamppu Livex Lighting
- Lamppu Hinkley Lighting
- Lamppu Ranex
- Lamppu COLBOR
- Lamppu Norwell
- Lamppu Bolt
- Lamppu Lucide
- Lamppu Nicols
- Lamppu HQ Power
- Lamppu Heitronic
- Lamppu Dorr
- Lamppu Apa
- Lamppu Pixel
- Lamppu Silva
- Lamppu Allegri
- Lamppu Perfect Christmans
- Lamppu XCell
- Lamppu Jinbei
- Lamppu Exagerate
- Lamppu Craftmade
- Lamppu Unilux
- Lamppu Trio Lighting
- Lamppu Louis Poulsen
- Lamppu SLV
- Lamppu Rotolight
- Lamppu Falcon Eyes
- Lamppu Yeelight
- Lamppu Lowel
- Lamppu Schonbek
- Lamppu Hoffman
Viimeisimmät Lamppu Käyttöohjeet
8 Huhtikuuta 2025
8 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
5 Huhtikuuta 2025
4 Huhtikuuta 2025
4 Huhtikuuta 2025
4 Huhtikuuta 2025
4 Huhtikuuta 2025
4 Huhtikuuta 2025