Akai BTH-W150ANC Käyttöohje

Akai Kuulokkeet BTH-W150ANC

Lue alta 📖 käyttöohje suomeksi merkille Akai BTH-W150ANC (30 sivua) kategoriassa Kuulokkeet. Tämä opas oli hyödyllinen 10 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Lataa PDF
Sivu 1/30
BTH-W150ANC
Bluetooth wooden headphones
User Manual
EN – ENGLISH
SAFETY INFORMATION :
To avoid possible hearing damage, limit listening time to high volumes !
PACKAGE CONTENT:
User manual
Warranty card
Earphones
Type C charging cable
SPECIFICATIONS:
Li-Po battery: 400mAh
Frequency range: 20Hz-20KHz
Max RF output: 6dBm
Bluetooth compatible version: V5.3
Bluetooth frequency: 2.402 2.480GHZ -
Bluetooth channel emission power: 8dBM
Working distance: 10m
ANC DB: 23±2dB
Music playing time: Around hours13
Charging time: s 1.5 hour
Input: 1000DC5 V mA
Output: DC5 3 V 00mA
Supported systems: IOS, Android
FEATURES :
ECO friendly materials
ANC noise reduction
Light weight
NTC charging protection
Operation and function descriptions :
1. Power on/off
Power on: Press and hold for 2 seconds, the blue and red lights will flash alternatively after power on.
Power off: Press and hold for 2 seconds, the red light will flash 2 times and then the headphones are shutting
down.
2. Wired connection mode
When the headphone is turned on, external the 3.5mm plug audio cable, the headphone will automatically
shut down and a voice prompt will specify: power off. (At this time, the headphone can only listen to the
music in the mobile phone, and all the buttons of the headphone are invalid).
3. Wireless Bluetooth connection mode
a. Bluetooth reconnection:
After the headphone , is on and enter to pairing mode, the red and blue lights flash alternately, and the
headphone will automatically re-connect with the mobile phone which was previously used. bluetooth of
After the reconnection will be made a voice prompt will specify: connected and the blue light is on.
b. Bluetooth connection :
After the headphone , the red and blue lights the mobile is on and enter to pairing mode flash alternately, use
phone to search the Bluetooth name and connect it. After the connection is made, a voice - " "BTH W150ANC
prompt will specify: connected and the blue light is on.
c. B utton function:
Short press for volume increase, long press for the next song, and there will be a beep when the volume
reaches at maximum level.
Short press to pause; short press this button to resume playback and long press for turn off the headphones.
Short press for volume down, long press for previous song, and there will be a beep when the volume is at
minimum.
d. disconnection:Bluetooth
Turn on the wireless connection from the mobile phone, click "BTH , and a prompt -W150ANC" to disconnect
voice will specify: disconnected. The red and blue lights flash alternately for 1S/time.
4. Call
a. Answer the phone:
When there is an incoming call, short press to answer the call.
b. End the call:
During a call, short press once, to End the call.
c. Decline calls:
When there is an incoming call, press and hold for one second to reject the call.
d. Last Code Redial:
D ouble tap to dial the last call in Bluetooth mode.
5. ANC mode
ANC On
ANC Off
6. Noise cancellation key (ANC)
Noise-cancelling technology cannot wholly isolate sound due to the air trapped between your audio device
and eardrum. For using this function, please remember However, the air is essential for you to hear music.
the following:
The noise cancelling effect may not be pronounced in a tranquil environment, or some sound may be heard.
If there is little ambient noise, it is even advisable not to switch on the NC function, as it needs ambient input
to function optimally.
Noise cancellation does not transfer during telephone calls. Although it protects the headphones user from
the surrounding noise, it does not apply to the receiver of the call: they will potentially hear background
noise.
Depending on how you wear the headset, the noise cancelling effect may vary, or a beeping sound (howling) -
may occur. In these cases, take off the headset and put it on again.
The noise cancelling function primarily works for noise in the low frequency band (train, airplane, engine -
noise). Although noise is reduced, it is not cancelled altogether.
When you use the headphone in a train or a car, noise may occur depending on environmental conditions. It
is not advisable to wear noise cancellation headphones while driving, as taking notice of traffic sounds is -
essential for your safety.
Mobile phones may cause interference and noise. Should this occur, locate the headphones further away
from the mobile phone.

Tuotetiedot

Merkki: Akai
Kategoria: Kuulokkeet
Malli: BTH-W150ANC

Tarvitsetko apua?

Jos tarvitset apua merkille Akai BTH-W150ANC esitä kysymys alla ja muut käyttäjät vastaavat sinulle


Kuulokkeet Akai Käyttöohjeet

Akai

Akai BTH-W150ANC Käyttöohje

2 Tammikuuta 2025

Kuulokkeet Käyttöohjeet

Viimeisimmät Kuulokkeet Käyttöohjeet

Meze Audio

Meze Audio POET Käyttöohje

9 Huhtikuuta 2025
Steelseries

Steelseries Arctis Nova 5X Käyttöohje

9 Huhtikuuta 2025
Nacon

Nacon RIG 900 MAX HX Käyttöohje

8 Huhtikuuta 2025
Trust

Trust Nouna 25277 Käyttöohje

3 Huhtikuuta 2025
PowerLocus

PowerLocus P2 Käyttöohje

3 Huhtikuuta 2025
Sennheiser

Sennheiser RS 120-W Käyttöohje

1 Huhtikuuta 2025
Behringer

Behringer SD251-CL PRO Käyttöohje

1 Huhtikuuta 2025
Celly

Celly PC2USBCEARPIN Käyttöohje

1 Huhtikuuta 2025
Celly

Celly Ultrasound Käyttöohje

1 Huhtikuuta 2025
Celly

Celly UP600 Käyttöohje

1 Huhtikuuta 2025