Ampeg Heritage SVT-CL Käyttöohje

Ampeg Ei luokiteltu Heritage SVT-CL

Lue alta 📖 käyttöohje suomeksi merkille Ampeg Heritage SVT-CL (11 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/11
Owners Manual
Heritage SVT-CL
Bass Guitar Amplifier
1
234
hi
lo
ultra hi / lo
5
master standby
standby/
power/
fault
powertreblefrequencymidrangebassgain
-15dB0dB
pb
no
pa
jh
2
Heritage SVT-CL Bass Guitar Amplifier
What’s in the Box
Ampeg Heritage™ SVT®-CL Amplier, Power Cable, Quick Start Guide.
Introduction
Welcome to the world of Ampeg. Whether this is your rst experience with Ampeg or you’re
a well-seasoned player who’s been around the globe a few times with our gear, you are taking
part in a piece of musical history. From here on out, nothing else will sound the same...
everything else will pale in comparison. You are one of the lucky few to take part in a new
chapter of an American legacy. Ampeg has come home! Each Heritage Series amplier and
cabinet is designed and assembled right here in the U.S.A. We’ve heard from bass players
around the globe about their dedication and commitment to Ampeg, and the Heritage Series
is made specically for those players. Just our way of saying thank you and letting you know
that we heard you loud and clear.
Ampeg is the standard by which all others are measured. We’ve been pounding bass
players’ chests and audiences’ booties for over 60 years now and we’re not going to slow
down anytime soon. From our early days of building “amplied pegs” for upright players, to
building the world famous, stadium rattling SVT, Ampeg has been choice for bassists, the
from touring professionals to weekend warriors and everyone in between. We were the rst
ones on the block listening to and building gear for bass players. Heck, even our company’s
founding fathers were working, gigging players. When they weren’t tinkering around the
shop on new ideas, they were out in the clubs of New York earning their living. Not much has
changed since then.
The average length of a hit song is 3 minutes and 40 seconds. We have been a part of most of
those hits for over 60 years. Now that you own a piece of Ampeg history, we want to be a part
of your next hit.
This document covers the features and specs of your new Heritage SVT-CL amp. We
recommend fully reading and understanding this Owner's Manual, as well as the Important
Safety Instructions included with your amplier, before using it.
On a personal note, the team at Ampeg would sincerely like to thank you for your support
and dedication to our mission in bringing you some of the best amps and cabs the world has
known. We wish you the best of luck in all of your musical endeavors!
Sincerely,
The dedicated team at Ampeg
TABLE OF CONTENTS
What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
The Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
The Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Suggested Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Changing the Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Setting Tube Bias . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Technical Specications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Warranty and Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
3
Heritage SVT-CL Bass Guitar Amplifier
The Front Panel
1. 0 dB INPUT: This Input jack is
recommended for the signal from a
passive instrument through a shielded
instrument cable.
2. -15 dB INPUT: This Input jack is
recommended for the signal from an
active instrument, or one with high
output pickups, through a shielded
instrument cable.
3. GAIN: This control adjusts the basic level
of signal in the preamp.
4. ULTRA HI: This switch, when engaged,
enhances the amount of high frequency
output by 9 dB at 8 kHz.
5. ULTRA LO: This switch, when engaged,
enhances the amount of low-end output
by 2 dB at 40 Hz, and 10 dB cut, at 500 Hz.
6. BASS: Use to adjust the low frequency
level of the amplier. This provides up to
12 dB of boost, or 12 dB of cut, at 40 Hz.
The low frequency output is at at the
center position.
7. MIDRANGE: Use to adjust the midrange
frequency level of the amplier. This
provides up to 10 dB of boost, or 20 dB of
cut, at the selected frequency [8]. The
midrange frequency output is at at
the center position. Rotate the control
counter-clockwise for acontoured
sound (more distant, less midrange
output), or clockwise for a sound that
really cuts through.
8.
FREQUENCY: This control allows you
to select the center frequency for the
Midrange control, giving you a choice of
ve frequencies for the midrange. The
numbers correspond to the following
center frequencies: 1=220 Hz, 2=450 Hz,
3=800 Hz, 4=1.6 kHz, and 5=3 kHz.
9. TREBLE: Use to adjust the high
frequency level of the amplier. This
provides up to 15 dB of boost, or 20 dB of
cut, at 4 kHz. The high frequency output
is at at the center position.
10. MASTER: Use to control the overall
output level. It affects the Speaker
Outputs and the Preamp Output. Use
it wisely and turn it down when making
connections or trying something new.
11. STANDBY/POWER/FAULT INDICATOR
LED: This is a multi-function LED. In
Standby mode it glows red. In the On
mode (when the high voltage comes on)
it glows green. If it does not turn green
in the On mode, this indicates there is no
high voltage present, and the unit needs
servicing. If the amp detects a fault in
the power tube circuit, the high voltage is
turned off and the LEDashes between
red and green. This usually indicates a
bad power tube. The amp will remain in
this condition until the unit is turned off.

Tuotetiedot

Merkki: Ampeg
Kategoria: Ei luokiteltu
Malli: Heritage SVT-CL

Tarvitsetko apua?

Jos tarvitset apua merkille Ampeg Heritage SVT-CL esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Ampeg Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet