Angler LCSB-1212 Käyttöohje

Angler Ei luokiteltu LCSB-1212

Lue alta 📖 käyttöohje suomeksi merkille Angler LCSB-1212 (8 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 9 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/8
INSTRUCTIONS
Collapsible LED Softbox
LEDSB-1818
For 1 × 1 LED Lights
2
Overview
Corner straps
Securing straps
Adjustable corners
Diuser
Recessed touch-connect strip
Carry bag
Notches
3
Attaching the Softbox
Preparing the Light Fixture
If the fixture has height adjustment knobs, raise the fixtures height
so it sits above the bottom of the yoke.
Some 1 × 1 fixtures have two sets of side knobs for tilt and height
adjustment. Adjust the height so the tilt knobs are in the middle of
the fixture. This will make it easier to fit the softbox onto it.
Tip: Tilting the fixture upward in its yoke will make it easier to fit the
softbox onto the fixture.
Attaching the Softbox
1.
Open the adjustable corners held
together with straps and touch-
connect strips.
2.
Align the softbox with a 1 × 1 light so
the securing straps don’t interfere
with the light’s rear control panel.
Note: For Luxli’s Timpani, the securing straps should be on the
sides of the fixture, the buckles should be on the right, and the
strap that’s closest to the edge of the softbox is on top.
1

Tuotetiedot

Merkki: Angler
Kategoria: Ei luokiteltu
Malli: LCSB-1212

Tarvitsetko apua?

Jos tarvitset apua merkille Angler LCSB-1212 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Angler Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet