Anova D226 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Anova D226 (38 sivua) kategoriassa Grastrimmer. Tämä opas oli hyödyllinen 10 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/38
D226
Owner s Manual (4 in 1): Petrol Brush cuer Petrol grass trimmer Petrol Pole Pruner / /
Long-reach petrol combuson engine hedge trimmer
English 1
INFORMATION TO SYMBOLS
Symbols
WARNING! A brush cutter or trimmer can be dangerous if used incorrectly or
carelessly, and can cause serious or fatal injury to the operator others. It is or
extremely important that you read and understand the contents of this owners
manual.
Please read the operators manual carefully and make sure you understand the
instructions before using the machine.
Always w r: ea
A protective helmet where there is a risk of falling objects
Approved hearing protection
Approv e protection ed ey
Max. speed of output shaft (if applicable) r , pm
Watch out for thrown objects and ricochets.
Wear sturdy, non-slip boots.
Always wear approved protective gloves.
Do not use saw blades
The operator of the machine must ensure, while working, that no persons or
anima come closer than 15 metres. ls
Machines tted with sa blades or ass blades can w gr be thro violently to wn
the side when the blade comes into contact with a fix object. This is called ed
blade thrust. The blade is capab le of an or amputating arm leg. ways k Al eep
people and animals least metres from the machine. at 15
Keep the machine a sucient distance away from electrical power lines.
Noise emission to the environment according to the European Community s
Directive. The machine s emission is specied in chapter Technical data and
on label.
English 2
INFORMATION TO SYMBOLS
Close the choke.
Open the choke.
The screw beside the "T" stamp is The Idle-speed adjustment screw.
The screw beside the "H" stamp is The High-speed adjustment screw.
The screw beside the "L" stamp is The Low-speed adjustment screw.
This machine shall always e a mixture of petrol and two-stroke oil. us
The chain oil tank
Adjust the oil pump
If you turn the rod by screwdriver follow the arrow to the "MAX" position, the
chain oil ow increase, and if you turn to the "MIN" position, decrease.
Shows the direction of the saw chain installation.
Machine can equip a typical metal blade three teeth blade.
Machine can equip a typical metal blade four teeth blade.
Do not use saw blades.
An arrow indicating rotation direction of cutting attachment.

Tuotetiedot

Merkki: Anova
Kategoria: Grastrimmer
Malli: D226

Tarvitsetko apua?

Jos tarvitset apua merkille Anova D226 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Grastrimmer Anova Käyttöohjeet

Anova

Anova D546HXP Käyttöohje

27 Joulukuuta 2024
Anova

Anova D226 Käyttöohje

27 Joulukuuta 2024
Anova

Anova D526 Käyttöohje

15 Lokakuuta 2024
Anova

Anova D536 Käyttöohje

15 Lokakuuta 2024
Anova

Anova D545 Käyttöohje

15 Lokakuuta 2024
Anova

Anova D553 Käyttöohje

15 Lokakuuta 2024

Grastrimmer Käyttöohjeet

Viimeisimmät Grastrimmer Käyttöohjeet

Toro

Toro 51464 Käyttöohje

8 Huhtikuuta 2025
Toro

Toro 51930 Käyttöohje

8 Huhtikuuta 2025
Makita

Makita BCX2500 Käyttöohje

1 Huhtikuuta 2025
Bavaria

Bavaria BBC 43 Käyttöohje

29 Maaliskuuta 2025
Einhell

Einhell BG-BC 43 AS Käyttöohje

29 Maaliskuuta 2025
Einhell

Einhell BG-BC 25 S Käyttöohje

29 Maaliskuuta 2025
Makita

Makita DST300 Käyttöohje

29 Maaliskuuta 2025
Makita

Makita BCM4300 Käyttöohje

28 Maaliskuuta 2025
Makita

Makita BCM2600 Käyttöohje

28 Maaliskuuta 2025
Makita

Makita BCM2310 Käyttöohje

28 Maaliskuuta 2025