Atlona AT-VTP-FMK-10-BL Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Atlona AT-VTP-FMK-10-BL (6 sivua) kategoriassa Reititin. Tämä opas oli hyödyllinen 20 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/6

1
Installation Guide
AT-VTP-FMK-10-BL
Flush Mount Kits for Velocity Touch Panels
AT-VTP-FMK-10-BL
The Atlona AT-VTP-FMK-10 is a ush mount kit for Velocity™ 10” touch panels. It allows the
touch panel to be recessed into a wall so the panel face is virtually ush with the wall surface.
The VTP-FMK-10 kit fastens to the wall with adjustable metal tabs and the touch panel attaches
to the mount via four magnets. These magnets secure the touch panel to the enclosure when in
use while also allowing it to easily be removed for maintenance if necessary. The VTP-FMK-10
is available in black and compatible with Velocity 10” touch panels including the AT-VTP-1000VL
and AT-VTPG-1000VL.
1 x AT-VTP-FMK-10-BL
1 x Perforated Wall Cutout Template
4 x Magnets
4 x Plastic Washers
4 x Screws
Package Contents

2
Installation Guide
AT-VTP-FMK-10-BL
Mounting Instructions
Use the following steps to install the AT-VTP-FMK into the wall.
1. Remove the inner two cut outs from the Perforated Wall Cutout Template. Just the outer ring
should remain.
10” Cutout Ring
8.09 inch
205.5 mm
10.71 inch
272 mm
5.41 inch
137.5 mm
7.76 inch
197 mm
8.09 inch
205.5 mm
5.41 inch
137.5 mm
10.71 inch
272 mm
7.76 inch
197 mm
2. Trace the inside edge of the cutout ring onto the wall.
3. Cut and remove the traced part of the wall.

3
Installation Guide
AT-VTP-FMK-10-BL
4. Pull the Ethernet cable through the hole in the wall and thread it through the VTP-FMK.
5. Slide the VTP-FMK into the hole in the wall until it is pressed fully against the wall.
6. Press a screwdriver into the triangle metal aps of the unit to secure the VTP-FMK into the
wall. There are 8 triangles to press in, two on each side.
Tuotetiedot
Merkki: | Atlona |
Kategoria: | Reititin |
Malli: | AT-VTP-FMK-10-BL |
Tarvitsetko apua?
Jos tarvitset apua merkille Atlona AT-VTP-FMK-10-BL esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Reititin Atlona Käyttöohjeet

16 Lokakuuta 2024
Reititin Käyttöohjeet
- Reititin D-Link
- Reititin DeWalt
- Reititin Lancom
- Reititin IFM
- Reititin TP Link
- Reititin Totolink
- Reititin StarTech.com
- Reititin Kogan
- Reititin Xiaomi
- Reititin Asus
- Reititin Cudy
- Reititin Netgear
- Reititin Digitus
- Reititin RGBlink
- Reititin Dell
- Reititin Nec
- Reititin Smart-AVI
- Reititin Hikvision
- Reititin Mikrotik
- Reititin Keezel
- Reititin Silentwind
- Reititin Alcatel
- Reititin StarIink
- Reititin Ubiquiti Networks
- Reititin SPL
- Reititin Advantech
- Reititin A-NeuVideo
- Reititin DVDO
- Reititin Luxul
- Reititin Rocstor
- Reititin Edimax
- Reititin Teltonika
- Reititin MuxLab
- Reititin Blackmagic Design
- Reititin Starlink
- Reititin Evolution
- Reititin AVM
- Reititin Huawei
- Reititin Bea-fon
- Reititin Kramer
- Reititin ATen
- Reititin Blustream
- Reititin Milesight
- Reititin Arris
- Reititin Vimar
- Reititin Draytek
- Reititin WyreStorm
- Reititin Alfatron
- Reititin Strong
- Reititin Ocean Matrix
- Reititin Marshall Electronics
- Reititin ZTE
- Reititin Sabrent
- Reititin Comprehensive
- Reititin Mercusys
- Reititin Hamlet
- Reititin Alfa
- Reititin KanexPro
- Reititin Eero
- Reititin Digitalinx
- Reititin Intelix
- Reititin Predator
- Reititin PulseAudio
- Reititin VigilLink
- Reititin Allnet
- Reititin Digital Forecast
Viimeisimmät Reititin Käyttöohjeet

9 Huhtikuuta 2025

9 Huhtikuuta 2025

8 Huhtikuuta 2025

30 Maaliskuuta 2025

30 Maaliskuuta 2025

30 Maaliskuuta 2025

30 Maaliskuuta 2025

29 Maaliskuuta 2025

25 Helmikuuta 2025

21 Helmikuuta 2025