Audibax Detroit 200 Go BT Käyttöohje
Lue alta 📖 käyttöohje suomeksi merkille Audibax Detroit 200 Go BT (4 sivua) kategoriassa Kaiutin. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/4
Detroit 200 Go BT
Please read the manual before using the product
USER´S
MANUAL
3
Detroit 200 Go BT
Safety Precautions
Do not clean the plastic enclosure with solvents or other chemical based cleaning products.
Do not place heat such as lighting equipment and smoke machines on the speaker cabinet.
Keep the device away from rain and moisture!
Always place the device in a secure manner to prevent the device from causing injury.
Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defects or problems.
Additional precautions for amplified devices
The device is designed use in dry conditions only.
Handle the power cord and all connections to the main power with particular caution!
The device should only be connected to 230V AC,50 Hz.
Never handle the power cord or the device when wet, as this could lead to electronic
shock.
Make sure the power-cord is in perfect condition before connecting.
Only handle the power-cord by the plug.
Always insert the power plug last. The power plug must always be interested without force.
Make sure that the power plug is tightly connected with the outlet.
Never let the power cord come into contact with other cables.
Only replace the fuse when the device is disconnected from the main power.
Only use fuses of the same rating and power. The correct fuse value is specified on the rear
panel.
Bluetooth connection
The first time you connect at device to the PA system, press the [MODE] button on the
MP3-player to enter Bluetooth mode, then find the PA system on the device you are
connecting. When using the connected device with Bluetooth, now you only need to switch
to Bluetooth mode on the PA system’s MP3-player—you don’t need to connect the device
again. If you need use the TWS, just push the Pair button after change to Bluetooth mode of
the two speakers. Then connect the Bluetooth with one of them, they will play the music
together.
How to connect two Detroit 200 Go BT speakers
It is possible to connect two Detroit 200 Go BT speakers with a simple XLR(male)-to-XLR(fema-
le)-cable using one speaker as a ‘master’ and another speaker as a ‘slave’.
Connect the female end of the XLR cable to the male ‘mix out’ on the ‘master’
speaker—then connect the 3-pin male end to the female line input on the ‘slave’ speaker.
BATTERY RECHARGE
The speaker has an internal, rechargeable battery capable of up to 6 hours of continuous
audio on a full charge. Even though the speaker may have some charge when first taken
out of the box, we recommend full charging your speaker before using the system. To
charge the battery:
1. Connect the speaker to a power outlet using the included power adapter.
2. Keep it plugged in until the indicator changes to 100%, that’s well charged. The speaker
utilizes a sealed lithium battery. When not in use, the battery will slowly self-discharge. If you
not use the speaker for long time, it should in full charge before storing. Better to charge the
unit every six months if no use. It will be good and longer to use. If the battery is in low
charge, impossible to recharge the battery, but the charge time is 6 hours more.
Detroit 200 Go BT USER´S
MANUAL
1 2
OPERATION Functions
1.SD card slot
2. [TWS Stereo Link] Bluetooth® connection button
3. Display of the built-in media player
4. USB port
5.MP3 Player
6. [MASTER] Rotary control to adjust the overall volume
7. [MUSIC] / [SPEECH] — [BASS BOOST] Rotary control to adjust the bass.
Turn the control to the left to reduce the bass. Turn the control to the right to increase the
bass.
8. [LEVEL]
Rotary control for adjusting the volume of the input signal at the line input
9. [POWER] / [LIMIT] Indicator LEDs for power supply and limiter
[POWER]: The LED lights up green once the unit is powered.
[LIMIT]: The LED lights up green when the signal is clipping. Turn down the control for the
master volume ([MASTER]) until the LED is no longer lit.
10. [LINE | MP3] Input signal switch. Use this button to toggle between external ([LINE] input)
and internal signal source (built-in media player).
When pressed, [MP3] the signal of the internal media player is played. When not pressed,
[LINE] the audio signal of an external audio player is played.
11. [LINE] 3.5 mm mini jack socket to connect an external audio device (CD or MP3 player)
12. [LINE OUT] Line output, designed as XLR output socket, 3-pin
13. [MIC/LINE 1] and [MIC/LINE 2] Mic / line inputs, designed as XLR input socket, 3-pin
14. Mic / line inputs, designed as 1/4" jack socket
15. [MIC] / [LINE] for channel 1 and 2 Toggle switch for the input signal of the respective
channel. Use these buttons to switch between mic and line input.
When pressed, [MIC] the microphone signal is played. When not pressed, [LINE] the line
signal is played.
16. [LEVEL 1] and [LEVEL 2] Rotary control for adjusting the volume of the input signal at the
line input of channel 1 or 2
17. [EFFECT 1] and [EFFECT 2] Rotary control for adjusting the echo effect of the input signal at
the line input of channel 1 or 2
18. IEC chassis plug with fuse holder for the power supply
19. [POWER] On / off switch
①
⑰
③
⑮
⑯
⑬
⑤
④
⑭
②
⑦
⑧
⑩
⑪
⑫
⑨
⑥
⑱ ⑲
MODE
Exchange between: USB/ SD/ BLUETOOTH REMOTE CONTROL
Play/Pause
Repeat
Last
Next
Detroit 200 Go BT
Por favor, lea el manual antes de usar el producto
MANUAL
DE USUARIO
3
Detroit 200 Go BT
¡Mantenga el dispositivo alejado de la lluvia y la humedad!
Coloque siempre el dispositivo de manera segura para evitar que cause lesiones.
Los daños causados por el incumplimiento de este manual de usuario no están sujetos a
garantía. El distribuidor no aceptará responsabilidad por los defectos o problemas
resultantes.
Precauciones adicionales para dispositivos amplificados
El dispositivo está diseñado para usarse únicamente en condiciones secas.
Manipule el cable de alimentación y todas las conexiones a la red eléctrica con especial
cuidado. El dispositivo solo debe conectarse a 230 V CA, 50 Hz.
Nunca manipule el cable de alimentación o el dispositivo cuando estén húmedos, p3-ya que
esto podría provocar una descarga electrónica.
Asegúrese de que el cable de alimentación esté en perfectas condiciones antes de
conectarlo. Manipule el cable de alimentación únicamente por el enchufe.
Inserte siempre el enchufe de alimentación en último lugar. El enchufe de alimentación debe
estar siempre interesado sin forzar.
Asegúrese de que el enchufe de alimentación esté firmemente conectado a la toma de
corriente.
Nunca permita que el cable de alimentación entre en contacto con otros cables.
Solo reemplace el fusible cuando el dispositivo esté desconectado de la alimentación
principal. Utilice únicamente fusibles del mismo calibre y potencia. El valor correcto del
fusible se especifica en el panel posterior.
Conexión Bluetooth
La primera vez que conecte un dispositivo al sistema PA, presione el botón [MODE] en el
reproductor de MP3 para ingresar al modo Bluetooth, luego busque el sistema PA en el
dispositivo que está conectando. Cuando use el dispositivo conectado con Bluetooth, ahora
solo necesita cambiar al modo Bluetooth en el reproductor de MP3 del sistema PA; no
necesita volver a conectar el dispositivo. Si necesita usar el TWS, simplemente presione el
botón Emparejar después de cambiar al modo Bluetooth de los dos altavoces. Luego
conecte el Bluetooth con uno de ellos, reproducirán la música juntos.
Cómo conectar dos altavoces Detroit 200 Go BT
Es posible conectar dos altavoces Detroit 200 Go BT con un simple cable XLR (macho) a XLR
(hembra) utilizando un altavoz como "maestro" y otro altavoz como "esclavo".
Conecte el extremo hembra del cable XLR a la "salida de mezcla" macho en el "maestro"
altavoz—luego conecte el extremo macho de 3 pines a la entrada de línea hembra en el
altavoz 'esclavo'.
RECARGA DE BATERÍA
El altavoz tiene una batería interna recargable con capacidad para hasta 6 horas de audio
continuo con una carga completa. Aunque el parlante puede tener algo de carga cuando
se saca de la caja por primera vez, recomendamos cargar completamente el altavoz antes
de usar el sistema. Para cargar la batería:
1. Conecte el altavoz a una toma de corriente con el adaptador de corriente incluido.
2. Manténgalo enchufado hasta que el indicador cambie al 100%, que esté bien cargado. El
altavoz utiliza una batería de litio sellada. Cuando no esté en uso, la batería se autodescar-
gará lentamente. Si no utiliza el altavoz durante mucho tiempo, debe cargarse por completo
antes de guardarlo. Es mejor cargar la unidad cada seis meses si no se usa. Será bueno y más
largo de usar. Si la batería tiene poca carga, es imposible recargar la batería, pero el tiempo
de carga es de 6 horas más.
Tuotetiedot
| Merkki: | Audibax |
| Kategoria: | Kaiutin |
| Malli: | Detroit 200 Go BT |
Tarvitsetko apua?
Jos tarvitset apua merkille Audibax Detroit 200 Go BT esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Kaiutin Audibax Käyttöohjeet
4 Tammikuuta 2025
4 Tammikuuta 2025
4 Tammikuuta 2025
4 Tammikuuta 2025
4 Tammikuuta 2025
4 Tammikuuta 2025
4 Tammikuuta 2025
4 Tammikuuta 2025
4 Tammikuuta 2025
4 Tammikuuta 2025
Kaiutin Käyttöohjeet
- Kaiutin Aiwa
- Kaiutin Bauhn
- Kaiutin LG
- Kaiutin Power Dynamics
- Kaiutin Vonyx
- Kaiutin Grundig
- Kaiutin Sharp
- Kaiutin Hama
- Kaiutin AOC
- Kaiutin Philips
- Kaiutin IKEA
- Kaiutin Edifier
- Kaiutin Fender
- Kaiutin Axton
- Kaiutin Kogan
- Kaiutin Soundcore
- Kaiutin Turbosound
- Kaiutin Sony
- Kaiutin GoGEN
- Kaiutin Pro-Ject
- Kaiutin Yamaha
- Kaiutin Morel
- Kaiutin Axis
- Kaiutin Extron
- Kaiutin Media-tech
- Kaiutin Pioneer
- Kaiutin EarFun
- Kaiutin Ecler
- Kaiutin Audac
- Kaiutin KEF
- Kaiutin Audio-Technica
- Kaiutin Toa
- Kaiutin Pyle
- Kaiutin Sencor
- Kaiutin Bose
- Kaiutin Orava
- Kaiutin Kanto
- Kaiutin JVC
- Kaiutin Sharper Image
- Kaiutin Kicker
- Kaiutin Auna
- Kaiutin OSD Audio
- Kaiutin Fenton
- Kaiutin MB Quart
- Kaiutin Aplic
- Kaiutin Advance
- Kaiutin Sonance
- Kaiutin AXESS
- Kaiutin Artsound
- Kaiutin Denon
- Kaiutin Ion
- Kaiutin Elac
- Kaiutin Marshall
- Kaiutin Yorkville
- Kaiutin V-Tac
- Kaiutin Braun
- Kaiutin JBL
- Kaiutin Infinity
- Kaiutin Majority
- Kaiutin Helix
- Kaiutin Genesis
- Kaiutin Logilink
- Kaiutin Klipsch
- Kaiutin Muse
- Kaiutin Ground Zero
- Kaiutin Karma
- Kaiutin Glemm
- Kaiutin Match
- Kaiutin Speed-Link
- Kaiutin Renkforce
- Kaiutin Definitive Technology
- Kaiutin QSC
- Kaiutin Q Acoustics
- Kaiutin GoldenEar
- Kaiutin Pyramid
- Kaiutin FoneStar
- Kaiutin Trevi
- Kaiutin Monitor Audio
- Kaiutin Peavey
- Kaiutin Canton
- Kaiutin Sven
- Kaiutin Energy Sistem
- Kaiutin PSB
- Kaiutin Vizio
- Kaiutin Polk
- Kaiutin ESX
- Kaiutin Omnitronic
- Kaiutin MEE Audio
- Kaiutin Monacor
- Kaiutin ModeCom
- Kaiutin Hercules
- Kaiutin Electro-Voice
- Kaiutin Wharfedale
- Kaiutin Boss
- Kaiutin Tannoy
- Kaiutin Mount-It!
- Kaiutin GMB Audio
- Kaiutin Mad Dog
- Kaiutin Samson
- Kaiutin Memphis Audio
- Kaiutin Focal
- Kaiutin Alpine
- Kaiutin Boompods
- Kaiutin Kramer
- Kaiutin Genelec
- Kaiutin Bazooka
- Kaiutin Lamax
- Kaiutin Aiaiai
- Kaiutin RCF
- Kaiutin N-Gear
- Kaiutin Vimar
- Kaiutin Phoenix Gold
- Kaiutin Aconatic
- Kaiutin Bogen
- Kaiutin Atlas
- Kaiutin PowerBass
- Kaiutin Harman Kardon
- Kaiutin Yamazen
- Kaiutin Lexibook
- Kaiutin Ibiza Sound
- Kaiutin Creative
- Kaiutin REL Acoustics
- Kaiutin Phonic
- Kaiutin Lexon
- Kaiutin Apart
- Kaiutin Magnat
- Kaiutin Boston Acoustics
- Kaiutin Crest Audio
- Kaiutin Devialet
- Kaiutin AudioSource
- Kaiutin Taga Harmony
- Kaiutin SoundTube
- Kaiutin Ruark Audio
- Kaiutin MB
- Kaiutin Antelope
- Kaiutin Lenco
- Kaiutin M-Audio
- Kaiutin SureFire
- Kaiutin Dali
- Kaiutin Berker
- Kaiutin LD Systems
- Kaiutin Denon DJ
- Kaiutin Nikkei
- Kaiutin HK Audio
- Kaiutin Eve Audio
- Kaiutin Delvcam
- Kaiutin Grimm Audio
- Kaiutin DAP Audio
- Kaiutin Cerwin-Vega
- Kaiutin Ikegami
- Kaiutin Revel
- Kaiutin New One
- Kaiutin Mission
- Kaiutin Proel
- Kaiutin Mackie
- Kaiutin Bowers Wilkins
- Kaiutin Sonus Faber
Viimeisimmät Kaiutin Käyttöohjeet
7 Tammikuuta 2025
5 Tammikuuta 2025
5 Tammikuuta 2025
5 Tammikuuta 2025
5 Tammikuuta 2025
5 Tammikuuta 2025
5 Tammikuuta 2025
5 Tammikuuta 2025
5 Tammikuuta 2025
4 Tammikuuta 2025