AXESS AX-ALOC700 Käyttöohje

AXESS Ei luokiteltu AX-ALOC700

Lue alta 📖 käyttöohje suomeksi merkille AXESS AX-ALOC700 (2 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/2
AX-ALOC700
INS TALL AT ION INSTR UCT ION S
REV. 1/15/18© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
Wire Color & Function: The audio input wire colors are an EIA standard
for car stereo applications as follows.
INPUT HARNESS
= Left front (+) inputWhite
= Left front (-) inputWhite/Black
= Right front (+) inputGray
Gray/Black = Right front (-) input
= Reference ground (-)Brown
(Reference ground optional if noise is present)
Note:
Be sure that all audio input connections are polarized or in phase
with each other. That is, the positive output wires from the audio source
need to be connected to the corresponding positive input wires of the
AX-ALOC700. The same goes for the negative audio wires. Failure to do
this will result in poor bass response and low quality audio.
Adjusting the AX-ALOC700 for maximum performance: After completing
all of the necessary connections, turn the AX-ALOC700 adjustment pots
all of the way down by rotating them completely counter-clockwise.
Now, turn the stereo system on and adjust the main volume control on
the stereo to approximately 3/4 maximum volume. Select one of the
adjustment pots on the AX-ALOC700 and turn it slowly clockwise until
you notice audio distortion and then stop. Turn the remaining pot to the
same position as the previously adjusted pot. The audio set-up of the
AX-ALOC700 is now complete and ready to be enjoyed.
The AX-ALOC700 is designed to convert speaker level audio to line level
audio. This allows for the installation of line level products such as amplifiers,
EQs and crossovers on systems that do not have RCA line level outputs.
Features:
80 Watts Maximum Input, Input Circuit Corrects Crossover Distortion
Commonly Found On Other Brands of LOCs, 6:1 Step Down with
Variable Output, Detachable Input Plug, Gold Plated RCAs, Attractive &
Durable Enclosure
2 Channel, Adjustable Line Output Converter
AX-ALOC700
REV. 1/15/18© COPYRIGHT 2018 METRA ELECTRONICS CORPORATION
Integrate • AxxessInterfaces.com
INSTRUCCIONES DE INSTALACIÓN
El AX-ALOC700 está diseñado para convertir el nivel de audio de las boci-
nas a un audio a nivel de línea. Esto permite la instalación de productos a
nivel de línea como amplificadores, ecualizadores y divisores de frecuen-
cia en los sistemas que no cuentan con salidas RCA a nivel de línea.
Características:
El voltaje máximo de entrada es de 80 watts. El circuito de entrada
corrige la distorsión de cruce por cero comúnmente encontrada en
otras marcas de convertidores de salida de línea. Reducción de voltaje
6:1 con salida variable. Enchufe de entrada desmontable. Cables RCA
recubiertos en oro. Empaque atractivo y duradero.
Convertidor de salida de línea
ajustable de dos canales
Función y color del cableado: Los colores del cable de entrada de
audio son un estándar de la EIA para las aplicaciones para estéreos de
auto, como se detalla a continuación.
MAZO DE CABLES DE ENTRADA
= Entrada izquierda delantera (+)Blanco
= Entrada izquierda delantera (-)Blanco/Negro
= Entrada derecha delantera (+)Gris
= Entrada derecha delantera (-)Gris/Negro
= Puesta a Tierra (-) Marrón
(Puesta a tierra opcional si hay ruido)
Nota:
Asegúrese de que todas las conexiones de entrada de audio estén
polarizadas o en fase, es decir, los cables positivos de salida de la fuente
de audio deben estar conectados a los cables positivos de entrada del
AX-ALOC700. La misma configuración aplica para los cables negativos
de audio. Si los cables no se conectan de esta manera, el resultado será
una reproducción de bajos deficiente y un audio de baja calidad
.
Ajuste del AX-ALOC700 para su máximo rendimiento: Tras completar todas
las conexiones necesarias, gire los potenciómetros de ajuste del AX-ALOC700
para que queden apuntando hacia abajo, rotándolos completamente
en sentido opuesto a las manecillas del reloj. A continuación, encienda
el sonido estéreo y ajuste el control de volumen principal del mismo
a aproximadamente 3/4 del volumen máximo. Seleccione uno de los
potenciómetros de ajuste del AX-ALOC700 y gírelo despacio en el sentido
de las manecillas del reloj. Deténgase cuando escuche que se distorsiona el
sonido. Gire el otro potenciómetro hasta ponerlo en la misma posición que
el potenciómetro recién ajustado. Ha finalizado la configuración de audio
para el AX-ALOC700 y está listo para disfrutar de su uso.

Tuotetiedot

Merkki: AXESS
Kategoria: Ei luokiteltu
Malli: AX-ALOC700

Tarvitsetko apua?

Jos tarvitset apua merkille AXESS AX-ALOC700 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu AXESS Käyttöohjeet

AXESS

AXESS AXDIS-BW122 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS 99-3303 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AXBT-MZ2 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AX-ALOC618 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS ANC-GMH3 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS ANC-GMH2 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS ANC-CHH2 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AX-AB-CH3 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AX-AB-CH4 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AX-TOYCAM3 Käyttöohje

15 Lokakuuta 2024

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet