AXESS AXDSPX-GM33 Käyttöohje

AXESS Ei luokiteltu AXDSPX-GM33

Lue alta 📖 käyttöohje suomeksi merkille AXESS AXDSPX-GM33 (8 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 4 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/8
AXDSPX-GM33
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2024 METRA ELECTRONICS CORPORATION REV. 2/12/24 INSTAXDSPX-GM33
INTERFACE FEATURES
INTERFACE COMPONENTS
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip ties • Multimeter
TABLE OF CONTENTS
Installation Options 2 ...............................................
Installation 2 .............................................................
Connections 3-4 ........................................................
Mobile App 5-6 .........................................................
Specifications 7 .........................................................
GM DSP Interface With Pre-Wired Harness
2021-Up
Designed for non-amplified models
Includes a DSP (Digital Signal Processor)
31 Band graphic EQ or 5 Band Parametric EQ
10 individually assignable outputs
Independent equalization on each of the 10 outputs
Independent high pass, low pass, and bandpass filters
Each channel can be delayed independently up to 10ms
Clipping detection and limiting circuits
Retains factory parking sensor chimes
Retains OnStar® voice prompts
Adjustable chime level
Easy behind the radio installation with pre-wired harness
Bass knob included for level control of subwoofer amp
Settings adjusted via Bluetooth® in a smart device application (tablet
or mobile phone), compatible with both Android and Apple devices
Read, write, and store configurations for future recall
Password protect feature available in the mobile app
Micro-B USB updatable
• AXDSPX-GM33 interface
• AXDSPX-GM33 output harness (LD-AX-DSP-OUT2)
• AXDSPX-GM33 vehicle T-harness (LD-DSP-GM33)
• Resistor Pad (LD-DSP-RPAD2)
• Bass knob (LD-BASSKNOB)
APPLICATIONS
Visit for current application listaxxessinterfaces.com
www.MetraOnline.com
MetraOnline.com may be used
to assist with dash assembly
instructions. Simply enter your
Year, Make, Model vehicle into the
vehicle fit guide and look for the
Dash Kit Installation Instructions.
2
Adding a sub to a factory system:
This feature offers the ability to add a subwoofer to a factory system. (refer to page 3)
Adding a full-range amp & sub to a factory system:
This feature offers the ability to add a full-range amp and sub to a factory system. (refer to page 4)
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Remove the factory radio †, then unplug all connectors.
2. AXDSPX-GM33 vehicle T-harness Install the to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. AXDSPX-GM33 vehicle T-harness AXDSPX-GM33 interface Plug the to the .
4. AXDSPX-GM33 interface harness AXDSPX-GM33 interface Plug the to the .
5. Google Play Store Apple App Store Download and install the AXDSP-X app from the or .
6. Bluetooth Connection Open the app then select the tab. Follow the instructions to pair
the mobile device to the interface. Refer to page 5 for more information.
7. Configuration Lock Down Scroll to the tab then select the vehicle type. Press the
button to save the configuration. Refer to page 6 for more information.
8. Connect the amp turn-on wire.
9. Lock Down Adjust the settings in the app as desired. Press the button to save any
new configurations.
Refer to Metra online for dash disassembly. If Metra makes a dash kit for the vehicle,
disassembly will be within those instructions.
Anytime the interface is locked down the key must be cycled off then back on
INSTALLATION OPTIONS INSTALLATION
3
REV. 2/12/24 INSTAXDSPX-GM33
Factory Radio
Keep nnec dCo te
Any remaining wires
tape o and disregard
(RGIQ - Ground
5XGTMK - lContro
Bass Knob
Factory Radio Harness
Interface
Any remaining wires
tape o and disregard
Vehicle T-Harness
(R[K=NOZK - Amp Turn-On Wire
These outputs can be used for
additional sub amps, or r addingfo
onto the system at a later date
RCA Jacks
(sold separately)
ADDING A SUB TO A FACTORY SYSTEM

Tuotetiedot

Merkki: AXESS
Kategoria: Ei luokiteltu
Malli: AXDSPX-GM33

Tarvitsetko apua?

Jos tarvitset apua merkille AXESS AXDSPX-GM33 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu AXESS Käyttöohjeet

AXESS

AXESS AXDSPX-BM1 Käyttöohje

25 Lokakuuta 2024
AXESS

AXESS AXDIS-BW122 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS 99-3303 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AXBT-MZ2 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AX-ALOC618 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS ANC-GMH3 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS ANC-GMH2 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS ANC-CHH2 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AX-AB-CH3 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AX-AB-CH4 Käyttöohje

15 Lokakuuta 2024

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet