AXESS AXDSPX-MI2 Käyttöohje

AXESS Ei luokiteltu AXDSPX-MI2

Lue alta 📖 käyttöohje suomeksi merkille AXESS AXDSPX-MI2 (16 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 6 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/16
AXDSPX-MI2
I N S T A L L A T I O N I N S T R U C T I O N S
AxxessInterfaces.com © COPYRIGHT 2021 METRA ELECTRONICS CORPORATION REV. 12/7/21 INSTAXDSPX-MI2
Google Play Store Apple App Store
iOS 12.1 or higher
TOOLS & INSTALLATION ACCESSORIES REQUIRED
• Crimping tool and connectors, or solder gun,
solder, and heat shrink • Tape • Wire cutter
• Zip-ties • Multimeter tester
TABLE OF CONTENTS
Installation Options ........................................................2
Installation ...................................................................... 2
Connections ................................................................. 3-4
Mobile App ................................................................. 5-14
Specifications .................................................................15
Mitsubishi DSPX Interface w/Pre-Wired
Harness
(for non-amplified vehicles)
2007-Up
INTERFACE FEATURES
Includes a DSP (Digital Signal Processor)
Selectable 31 Band Graphic EQ or 5 Band Parametric EQ
10 individually assignable outputs
Independent equalization on each of the 10 outputs
Independent high pass, low pass, and bandpass filters
Each channel can be delayed independently up to 10ms
Clipping detection and limiting circuits
Designed for non-amplified models
Easy behind the radio installation with pre-wired harness
Bass knob included for level control of subwoofer amp
Settings adjusted via Bluetooth
®
in a smart device application (tablet
or mobile phone), compatible with both Android and Apple devices
Read, write, and store configurations for future recall
Password protect feature available in the mobile app
updatableUSB Micro B
INTERFACE COMPONENTS
• AXDSPX-MI2 interface
• AXDSPX-MI2 interface harness
• AXDSPX-MI2 vehicle T-harness • Bass knob
• AXDSPX-MI2 display T-harness
APPLICATIONS
Visit axxessinterfaces.com for current application list.
2
Adding a subwoofer to a factory system:
The diagram on Page 3 shows the connections that need to be made to add a subwoofer to the
factory system.
Note: RCA jacks sold separately.)
Adding a full-range of amps and subwoofer to a factory system:
The diagram on Page 4 shows the connections that need to be made to add:
Subwoofer (RCA jacks sold separately)
Amplifier (SPDT relay E-123 required) or Additional Amp (RCA jacks sold separately).
Note: The interface provides a 12-volt 1-amp output to turn on aftermarket amp(s). If installing
multiple amps, an SPDT automotive relay will be required if the amp turn-on current of all amps
combined exceeds 1-amp. Use Metra part number E-123 (sold separately) for best results.
1. Disassemble the dash, unplug all connectors, and then remove the factory radio. †
2. Install the AX-DSPX-MI2 vehicle T-harness to the vehicle and make all necessary
connections, but leave the amp turn-on wire disconnected.
3. AX-DSPX-MI2 vehicle T-harness Plug the to the AX-DSPX-MI2 interface.
4. Plug the AX-DSPX-MI2 interface harness AX-DSPX-MI2 interface to the .
5. AX-DSP-XL Download and install the app from the Google Play Store Apple App Store or .
6. Bluetooth Connection Open the app then select the tab. Follow the instructions to
pair the mobile device to the interface. Refer to page 6 for more information.
7. Scroll to the tab then select the vehicle type. Press theConfiguration Lock Down
button to save the configuration. Refer to page 7 for more information.
8. Connect the amp turn-on wire.
9. Adjust the settings in the app as desired. Press the ‡ button to save any Lock Down
new configurations.
For dash disassembly instructions, refer to metraonline.com. Enter the year, make,
and model of the vehicle in the Vehicle Fit Guide and find instructions under Metra
Radio Install kits.
Anytime the interface is locked down the key must be cycled off then back on.
INSTALLATION OPTIONS INSTALLATION
3
REV. 12/7/21 INSTAXDSPX-MI2
SUB
Factory Radio Chassis
Factory Radio Harness
Interface
Any remaining wires
tape off and disregard
These outputs can be used for
additional sub amps, or for adding
onto the system at a later date
Vehicle T-Harness
Interface T-Harness
Bass Knob
Black - Chassis Ground
Orange - Control Wire
Blue/White - Amp Turn-On Wire
Keep Connected
Any remaining wires
tape off and disregard
RCA Jacks
(sold separately)
ADDING A SUB TO A FACTORY SYSTEM

Tuotetiedot

Merkki: AXESS
Kategoria: Ei luokiteltu
Malli: AXDSPX-MI2

Tarvitsetko apua?

Jos tarvitset apua merkille AXESS AXDSPX-MI2 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu AXESS Käyttöohjeet

AXESS

AXESS AXDSPX-BM1 Käyttöohje

25 Lokakuuta 2024
AXESS

AXESS AXDIS-BW122 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS 99-3303 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AXBT-MZ2 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AX-ALOC618 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS ANC-GMH3 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS ANC-GMH2 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS ANC-CHH2 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AX-AB-CH3 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AX-AB-CH4 Käyttöohje

15 Lokakuuta 2024

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet