AXESS USB-MINI-CAB Käyttöohje

AXESS Ei luokiteltu USB-MINI-CAB

Lue alta 📖 käyttöohje suomeksi merkille AXESS USB-MINI-CAB (3 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/3
USB-MINI-CAB
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
1-800-221-0932 metraonline.com
REV. 10/16/13
Introduction
For installation and operation instructions, please go to
www.axxessinterface.com (http://www.axxessinterface.com/) and click on
the “Firmware Downloads” tab.
USB-MINI-CAB
INSTRUCTIONS
1. Download the webxxpress updater program from
www.axxessinterface.com.
2. Once downloaded double click the webxxpress program icon located on
your desktop and follow prompts. Note: For windows Vista users right
click on icon and click “run as administrator”.
3. Once installed connect the USB-MINI-CAB to your computer
(sold separately) and follow prompts to install drivers. Note: Not all
computers will need to do this.
4. Once drivers are installed open the USB bootloader program which is
located in the “all program” section of your start menu.
5. Open up the Axxess interface box that needs to be updated to access the
micro “B” port on the circuit board.
6. With the USB boot loader program opened, click “update unit board”.
When prompted, plug the USB-MINI-CAB into the micro “B” port of the
Axxess interface and the board will begin to update to the latest version.
USB-MINI-CAB
© COPYRIGHT 2004-2011 METRA ELECTRONICS CORPORATION
1-800-221-0932 metraonline.com
REV. 10/16/13
Introducción
Para ver instrucciones de instalación y operación, visite www.
axxessinterface.com (http://www.axxessinterface.com/) y haga clic en la
pestaña “Firmware Downloads” (Descargas de firmware).
USB-MINI-CAB
INSTRUCCIONES
1. Descargue el programa actualizador webxxpress de
www.axxessinterface.com.
2. Una vez descargado, haga doble clic en el ícono del programa
webxxpress localizado en su escritorio y siga las indicaciones. Nota: Si
es usuario de Windows Vista, haga clic con el botón derecho en el ícono
y haga clic en “ejecutar como administrador”.
3. Cuando haya instalado el programa, conecte el USB-MINI-CAB a su
computadora (se vende por separado) y siga las indicaciones para
instalar los controladores. Nota: No es necesario hacer esto en
todas las computadoras.
4. Cuando los controladores se hayan instalado, abra el programa cargador
de USB que se localiza en la sección “todos los programas de su menú
de inicio.
5. Abra el cuadro de interfase Axxess que necesita actualizarse para
acceder al micro puerto “B en la tarjeta de circuitos.
6. Con el programa cargador de USB abierto, haga clic en “actualizar la
tarjeta de la unidad”. Cuando se le solicite, conecte el USB-MINI-CAB
en el micro puerto “B” de la interfase Axxess y la tarjeta empezará a
actualizarse a la versión más reciente.

Tuotetiedot

Merkki: AXESS
Kategoria: Ei luokiteltu
Malli: USB-MINI-CAB

Tarvitsetko apua?

Jos tarvitset apua merkille AXESS USB-MINI-CAB esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu AXESS Käyttöohjeet

AXESS

AXESS AXDIS-BW122 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS 99-3303 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AXBT-MZ2 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AX-ALOC618 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS ANC-GMH3 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS ANC-GMH2 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS ANC-CHH2 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AX-AB-CH3 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AX-AB-CH4 Käyttöohje

15 Lokakuuta 2024
AXESS

AXESS AX-TOYCAM3 Käyttöohje

15 Lokakuuta 2024

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet