Blackstar ID:CORE Stereo 10 V4 Käyttöohje
Blackstar
Kitaran vahvistin
ID:CORE Stereo 10 V4
Lue alta 📖 käyttöohje suomeksi merkille Blackstar ID:CORE Stereo 10 V4 (51 sivua) kategoriassa Kitaran vahvistin. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/51
Designed and Engineered by
Blackstar Amplication UK
Owner’s Manual
ID:CORE STEREO 10 V4, ID:CORE STEREO 10 V4 BT,
ID:CORE STEREO 20 V4, ID:CORE STEREO 40 V4
IMPORTANT SAFETY INSTR
4
Warning!
Important safety information!
READ THE FOLLOWING INFORMATION CAREFULLY. SAVE ALL
INSTRUCTIONS FOR FUTURE REFERENCE!
Follow all warnings and instructions marked on the product!
Danger! High internal operating voltages.
Do not open the equipment case. There are no user serviceable parts in this
equipment. Refer all servicing to qualied service personnel.
Clean only with a dry cloth.
Condensation can form on the inside of an amplier if it is moved from a cold
environment to a warmer location. Before switching the unit on, it is recommended
that the unit be allowed to reach room temperature.
Unauthorised modication of this equipment is expressly forbidden by Blackstar
Amplication Ltd.
Never push objects of any kind into ventilation slots on the equipment casing.
Do not expose this apparatus to rain, liquids or moisture of any type.
Avoid placing vessels lled with liquid on top of the amplier.
Do not place this product on an unstable trolley, stand or table. The product may
fall, causing serious damage to the product or to persons!
Do not cover or block ventilation slots or openings.
This product should not be placed near a source of heat such as a stove, radiator,
or another heat producing amplier.
Use only the supplied power cord which is compatible with the mains voltage
supply in your area.
Power supply cords should always be handled carefully and should be replaced if
damaged in any way.
Never break o the earth (ground) pin on the power supply cord.
The power supply cord should be unplugged when the unit is to be unused for long
periods of time.
Before the unit is switched on, the loudspeaker should be connected as described
in the handbook using the lead recommended by the manufacturer.
Always replace damaged fuses with the correct rating and type.
Never disconnect the protective mains earth connection.
High loudspeaker levels can cause permanent hearing damage. You should
therefore avoid the direct vicinity of loudspeakers operating at high levels. Wear
hearing protection if continuously exposed to high levels.
If the product does not operate normally when the operating instructions are
followed, then refer the product to a qualied service engineer.
English
Tuotetiedot
| Merkki: | Blackstar |
| Kategoria: | Kitaran vahvistin |
| Malli: | ID:CORE Stereo 10 V4 |
Tarvitsetko apua?
Jos tarvitset apua merkille Blackstar ID:CORE Stereo 10 V4 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Kitaran vahvistin Blackstar Käyttöohjeet
21 Lokakuuta 2024
21 Lokakuuta 2024
Kitaran vahvistin Käyttöohjeet
- Kitaran vahvistin Vox
- Kitaran vahvistin Roland
- Kitaran vahvistin SPL
- Kitaran vahvistin Radial Engineering
Viimeisimmät Kitaran vahvistin Käyttöohjeet
21 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
21 Lokakuuta 2024
19 Lokakuuta 2024
19 Lokakuuta 2024
16 Lokakuuta 2024