Bolt BO-1006 Käyttöohje
Bolt
Muut kameran tarvikkeet
BO-1006
Lue alta 📖 käyttöohje suomeksi merkille Bolt BO-1006 (3 sivua) kategoriassa Muut kameran tarvikkeet. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/3
User’s Guide
This locking ash cable is made with high-quality,
wear-resistant insulated wires. It connects your
battery pack to your ash. The locking mechanism
ensures a secure connection between the battery
pack and the cable. This cable is compatible with
major battery pack brands, including Quantum,
Lumedyne, Dynalite, and Impact.
Warnings
• Use only as instructed. Both terminal connectors
output high voltage.
• Only connect your ash unit to your battery pack
with a cable that is compatible with both.
• Do not use if any wire is exposed as a result of
damage or wear.
• Keep out of reach of children.
• Make sure the cable is rmly connected at both
ends when using your battery pack.
• Unplug this cable from the sockets on the
battery pack and ash unit when it is not in use.
Locking Flash Cable
1
2
31. Plug the 5-pin metal connector of the cable rmly
into the output socket on your battery.
2. Be sure the cable is securely seated in the socket,
and rotate the locking collar to the locked position.
3. Plug the other end of the cable securely into the
compatible power port on your ash unit.
Connecting Your Battery Pack to Your Flash
For use with other battery pack brands, follow the instructions provided by the battery pack manufacturer.
Important! Load your ash unit with its standard batteries before connecting it to your battery pack. Most compatible ash
units require the standard batteries to be installed in order to power the computer functions that allow the ash to work.
One-Year Limited Warranty
This Bolt product is warranted to the original purchaser to be free from defects in materials and workmanship under normal
consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs
later. The warranty provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement,
at the provider’s discretion, of any product that fails during normal use of this product in its intended manner and in its intended
environment. Inoperability of the product or part(s) shall be determined by the warranty provider. If the product has been
discontinued, the warranty provider reserves the right to replace it with a model of equivalent quality and function.This warranty
does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance.
EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. This warranty provides you with specic legal rights, and you may also have additional rights that vary from state to
state. To obtain warranty coverage, contact the Bolt Customer Service Department to obtain a return merchandise authorization
(“RMA”) number, and return the defective product to Bolt along with the RMA number and proof of purchase. Shipment of the
defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.boltashes.com or call Customer Service at 212-594-2353.
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Bolt is a registered trademark of the Gradus Group. © 2014 Gradus Group LLC. All Rights Reserved. GG2
Locking Flash Cable
Tuotetiedot
| Merkki: | Bolt |
| Kategoria: | Muut kameran tarvikkeet |
| Malli: | BO-1006 |
Tarvitsetko apua?
Jos tarvitset apua merkille Bolt BO-1006 esitä kysymys alla ja muut käyttäjät vastaavat sinulle
Muut kameran tarvikkeet Bolt Käyttöohjeet
14 Joulukuuta 2024
Muut kameran tarvikkeet Käyttöohjeet
Viimeisimmät Muut kameran tarvikkeet Käyttöohjeet
8 Joulukuuta 2024
8 Joulukuuta 2024
8 Joulukuuta 2024