CAME-TV Power Track Dolly Käyttöohje

CAME-TV Ei luokiteltu Power Track Dolly

Lue alta 📖 käyttöohje suomeksi merkille CAME-TV Power Track Dolly (4 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/4
7
8
109
11
12
13
15
14
OK
A
10S OK“STOP”
A
B
50%
I I
B
T
CAME-TV
0%
100%
12
3
4
5
6
SET USB-C
CAME-TV
1
2
3
4
5
6
On /Off Button
Type-C USB
Transmit Antenna
Adjust the Wheel
Display Screen
Function Key Area
7
8
9
10
11
12
Receiver Antenna
Type-C USB
Wireless Pair Button
Indicator Light
On / Off Button
Power Drive Wheel
V-mount Battery Lock
13
V-mount Battery Plate
14
15 Dolly Connector
OK
A
10S“STOP”
A
B
50%
I I
B
T
CAME-TV
0%
100%
Power Track Dolly
User Manual
Specification:
Frequency:2.4G
Transmitter:Built-in 3.7v/1000mah Battery
Receiver:External battery rated voltage 14.8v
Max.Payload:20KG
Max.Speed:22s/m
Min.Speed:160s/m
Movement Distance:Unlimited
Rail diameter:25mm
RoHS
MADE IN CHINA
Controller
ReceiverParameters
OK
A
10S OK“STOP
A
B
50%
I I
B
T
CAME-TV
0%
100%
OK
A
I I
B
Wireless signal Battery level
Trip distance data
Pause Charging
Calibration completeRunning speed
Function button
S10 OKSTOP
A
B
50%
T
Trip progress bar
Point BPoint A
Point A Menu Up / Speed Up
Menu Down / Speed Down
Menu Confirmation
Menu Back
Point B
Pause
Start
Menu and Confirmation
OK
A
I I
B
14.8V
SET USB-C
14.8V
Type-C USB
IN 5V/1A
Controller charging and receiver battery installation
Operation Instructions
Press and hold
for 3 seconds
to switch on/off
Press and hold
for 3 seconds
to switch on/off
Important: Please correctly select the Type-C USB data cable and the adapter with 5V/1A to
charge the controller, otherwise it is easy to cause bad or serious consequences!
Important: Please correctly select the 12V--16.8V V mount Battery for photography to supply
power to the device, otherwise it is easy to cause bad or serious consequences!
Display Screen Interface
MENU
CALIBRATE
PAIRING
POWER OFF
DEFAULT
CALIBRATE
Receiver
Emitter
CALIBRATE
Receiver
Emitter
RECEIVER
START
Emitter-hand
START
Emitter-hand
XX.X%
MAX-POINT
Emitter-hand
XX.X%
MIN-POINT
Emitter-hand
DONE
RECEIVER
POSITIVE
RECEIVER
REVERSE
RECEIVER
DONE
OK
OK
CAME-TV
0%
100%
CAME-TV
0%
100%
CALIBRATE Press OK to display START, then press OK to display POSITIVE, long press or short press the menu up button. Control the receiver to run in the positive direction to the desired position or the 1.Receiver Calibration:
positive limit position and stop. That is to confirm that the point is the forward limit position. Press the OK key to display REVERSE to enter the reverse stroke setting. Then long press or short press the menu down button to control the
receiver to run in the reverse direction to the desired position or the reverse limit position and stop. That is to confirm that the current position is the reverse limit position. Short press the OK key to display DONE and then OK again to
set successfully and return to the main menu interface.)
2.Emitter Calibration: Press the OK key to display START and then press the OK key to display MAX-POINT. Turn the handwheel clockwise to the maximum limit and stop. Then press the OK key, display MIN-POINT.
At this time reverse Turn the handwheel clockwise to the minimum limit and stop. Then press the OK key to display DONE and press the OK key to return to the main menu. The setting should be set after this process.
OK OK
OK OK OK OK OK
OK
OK
PAIRING: 1.CONNECT: To pair the transmitter with the receiver, Press the receiver pairing button for more than 3 seconds to enter the pairing mode. At this time, the transmitter enters the CONNECT interface. Select START. If the interface displays
Connect, it means that the transmitter is in pairing mode. When the interface displays Connect.....->OK, it means the pairing is successful.
To avoid interferences, when the singal is bad, press the up or down button to modify the channel, the channel modification range is 20~36.2.CHANNEL:
POWER OFFAuto stand-by and sleep mode: 10 minutes, 30 minutes, 60 minutes, never off
DEFAULT Restore the factory default Settings, but the calibration process of the receiver will remain unchanged.
ABOUT Display the firmware version number of the transmitter and receiver. If the receiver is not connected, the receiver part will display "Unknown".
The remote and dolly are paired at the factory and ready for use when they are powered on.
They can be connected automatically and no need to pair again.
*

Tuotetiedot

Merkki: CAME-TV
Kategoria: Ei luokiteltu
Malli: Power Track Dolly

Tarvitsetko apua?

Jos tarvitset apua merkille CAME-TV Power Track Dolly esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu CAME-TV Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet