Chord CM-50 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Chord CM-50 (1 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/1
CM- 50
Item ref: 174.176 UK
Compressor Pedal
User Manual
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
Thank you for choosing a Chord effect pedal to give your instrument a new sound dimension. Please
read below for an explanation of the controls and to get the best results from your new effect.
Each Chord 50-series effect pedal is supplied with a 9V battery, which needs to be connected to the
battery clip inside the underside battery compartment. Carefully remove the plastic cover by squeezing
its clip and levering outwards. Clip back into place once the battery is fitted.
Controls and connections are described below.
The -50 is a compressor pedal that can be set to provide clean sustain and/or control peaks in the CM
guitar signal to keep the tone clean. The main function of the compressor is to reduce gain of a loud
signal and increase the gain of a low signal. This has the effect of reducing the attack (picking) of the
guitar string(s) and then gradually increasing gain as the string sound starts to fade out, making its
sound last longer (i.e. sustain). Th more Sustain that is added can reduce the overall output and so e
the Level control allows this to be corrected or even boosted for clean solos. The Attack control slightly
delays the effect of the compressor to allow picked or strummed notes to have more peak signal at the
start of each phrase, reinstating the attack of the guitar that would otherwise be compression. lost to
Unplug the guitar input jack to preserve the battery when not in use. If the pedal is not being used for
long periods, it is advised to remove the 9V battery. Optional external power can be from a 9Vdc
adaptor, centre-negative polarity with a rating of 100mA or higher recommended.
1.
Optional 9V DC jack power input
2.
Effect on/off indicator
3.
Sustain - adjusts the level of compression applied
4.
6.3mm jack output - to amplifier
5.
Level - adjusts the output level
6.
Attack - adjusts the speed of the compression effect
7.
6.3mm jack input - from guitar
8.
Effect on/off footswitch
Disposal: The “Crossed Wheelie Bin” symbol on the product means that the product is classed as Electrical
or Electronic equipment and should not be disposed with other household or commercial waste
at the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted. Copyright© 2024. AVSL Group Ltd.
Unit 2-4 Bridgewater Park, Taylor Rd. Manchester. M41 7JQ
AVSL (EUROPE) Ltd, Unit 3D North Point House, North Point Business Park, New Mallow Road, Cork, Ireland

Tuotetiedot

Merkki: Chord
Kategoria: Ei luokiteltu
Malli: CM-50

Tarvitsetko apua?

Jos tarvitset apua merkille Chord CM-50 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Chord Käyttöohjeet

Chord

Chord MT-50 Käyttöohje

4 Maaliskuuta 2025
Chord

Chord CM-50 Käyttöohje

4 Maaliskuuta 2025

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet