Comica ADCaster C2 Käyttöohje

Comica Ei luokiteltu ADCaster C2

Lue alta 📖 käyttöohje suomeksi merkille Comica ADCaster C2 (1 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 3 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/1
19
Specifications
Interface
Input Port
AUX Port
Digital Port
OUT Port
SPK Output
Headphone Output
2 x XLR/6.35mm, 1 x 3.5mm
1 x 3.5mm
1 x USB-C
2 x 3.5mm
1 x 3.5mm
2 x 3.5mm
Audio Resolution
Sample Rate
Bit Depth
48kHz
24bit
Microphone Input
Dynamic Range
Frequency Responce
THD+N
Equivalent Noise
Input Impedance
Maximum Input Level
Gain Range
100dB(A-weighted, as per IEC651)
20Hz ~ 20kHz, ±0.1dB
0.003%, 1kHz, -3dBFS, 22Hz/22kHz BPF
-130dBu(A-weighted, as per IEC651)
5kΩ
-4dBu
6dB ~ 60dB
Instrument Input
Dynamic Range
Frequency Responce
THD+N
Equivalent Noise
Input Impedance
Maximum Input Level
Gain Range
100dB(A-weighted, as per IEC651)
20Hz ~ 20kHz, ±0.1dB
0.003%, 1kHz, -3dBFS, 22Hz/22kHz BPF
-130dBu(A-weighted, as per IEC651)
50kΩ
4dBu
0dB ~ 30dB
2120
SPK Output
Dynamic Range
Frequency Responce
Output Impedance
Maximum Output Level
100dB(A-weighted,as per IEC651)
20Hz ~ 20kHz, ±1dB
600Ω
4dBu
Headphone Output
Dynamic Range
Frequency Responce
Output Impedance
Maximum Output Level
100dB(A-weighted, as per IEC651)
20Hz ~ 20kHz, ±1dB
4dBu
Others
Battery
Charging
Phantom Power Output
Net Weight
Dimension
Working Temperature
Storage Temperature
Lithium Battery 2900mAh 3.7V
With 48V Phantom Power on: 6Hours
With 48V Phantom Power o: 10Hours
USB-C 5V2A
48V±2V
670g
239 x158 x 51mm
0 ~ 50℃ ℃
-20 ~ 60℃ ℃
2218
1. Please turn o the 48V phantom power before connecting/
disconnecting microphones to avoid damage to the mics
2.When connecting mics not requiring 48V phantom power, please
make sure to turn o 48V phantom power to avoid damage to the mics
Monitor
1. Connect Microphones
Connect XLR/6.35mm microphones to ADCaster C2 via Input Port1/2(XLR/
6.35mm) (Please switch on the 48V phantom power when using mics powered
by it); connect 3.5mm microphones to ADCaster C2 via Input Port2(3.5mm)
and rotate the Mic Gain Control Knob 1/2 to adjust the gain of mic1/2
2. Connect Instruments
Connect 6.35mm instruments to ADCaster C2 via Input Port1/2(XLR/6.35mm)
and rotate the Mic Gain Control Knob 1/2 to adjust the gain of the instrument
input
13
DAW Software Setting:
If ADCaster C2’ cannot be found in the software, please make sure
that ADCaster C2 is connected to the computer and open the sound
settings in the computer to see if ADCaster C2 has been set as the
default output device of the computer
When Recording with Digital Audio Workshop, please follow the instructions
below to set up (Take Cubase and Pro Tools as examples)
Cubase
1. Please download and install the driver ASIO4ALL in advance
2. Connect ADCaster C2 to the computer, open Cubase, and create a new
project
3. Click ‘Devices - Device Setup’. SelectVST Audio System - ASIO4ALL v2’
4. Click ‘ASIO4ALL v2 - Control Panel’ to activate the ‘ADCaster C2’
input/output port (click to lighten the power and play icons)
ProTools
1. Please download and install the driver ASIO4ALL in advance
2. Connect ADCaster C2 to the computer, open Pro Tools, and create a new
project
3. Click ‘Setup- Playback Engine’, and choose ‘ASIO4ALL v2’
4. Click ‘Setup - Hardware - ASIO4ALL v2 -Launch Setup App’ to activate
theADCaster C2’ input/output port (click to lighten the power and play
icons)
15
Monitoring Headphone
Usage Scenes:
4. Gaming on Computer
4.1 Connect microphone, monitoring headphones to ADCaster C2
according to the diagram above
4.2 Connect computer and ADCaster C2 via 2-in-1 audio cable. Computer
will automatically recognize ADCaster C2 and match the driver
4.3 Click “Windows Settings - System - Sound”, set “Comica_ADCaster C2”
as the default input/output device of the computer
4.4 Open your chosen game live application and check if
“Comica_ADCaster C2” is the default audio/playback device
4.5 Start your game live streaming
Monitoring Headphone
Microphone
16
3. Live Streaming on Smartphone
3.1 Connect live streaming smartphone, accompaniment smartphone,
microphone, monitoring headphones to ADCaster C2 according to the
diagram above
3.2 Turn on ADCaster C2 and select the sound eects needed
3.3 Open a live streaming app on the smartphone and start streaming
Smartphone
Microphone
Phone for
Accompaniment
Phone for
Accompaniment
17
Pairing Method: Turn on Bluetooth of ADCaster C2 and smartphone,
search for ‘Comica_ADCaster C2’ on the smartphone and click to
connect. The Bluetooth input can be used after paired
3. External Audio Input
3.1 Wired Input
Connect ADCaster C2 to smartphone/computer via Output Port1/2/AUX
Input Port/USB-C Port to input audio signals and turn the AUX Input
Volume Control Knob to adjust the volume or adjust the volume on the
input devices (The volume of audio signals input via Output Port1/2 can
only be adjusted on the input devices.)
3.2 Bluetooth Input
Connect ADCaster C2 to smartphone via Bluetooth to input audio signals
and turn the AUX Input Volume Control Knob to adjust the volume
4. Connect Monitoring Headphones
ADCaster C2 has dual 3.5mm headphone monitor ports. Connect TRS/TRRS
headphone to monitor and turn the Monitor Volume Control Knob to adjust
monitor volume
5. Connect Speakers
Connect speakers to ADCaster C2 via 3.5mm Speaker Output Port and turn
the Output Gain Control Knob to adjust the output volume
6. Connect Smartphone/Computer
Connect ADCaster C2 to smartphone/computer via USB-C Port/Output
Port1/2 and turn the Output Gain Control Knob to adjust the output volume
1.1 Connect microphone, monitoring headphones to ADCaster C2
according to the diagram above
1.2 Connect computer and ADCaster C2 via 2-in-1 audio cable. Computer
will automatically recognize ADCaster C2 and match the driver
1.3 Click “Windows Settings - System - Sound”, set “Comica_ADCaster C2”
as the default input/output device of the computer
1.4 Open your chosen recording application and check if
“Comica_ADCaster C2” is the default audio/playback device
1.5 Record your podcast audio
1.6 Export and upload your audio to podcast platform
2.1 Connect accompaniment smartphone, microphone, monitoring
headphones to ADCaster C2 according to the diagram above
2.2 Connect computer and ADCaster C2 via 2-in-1 audio cable. Computer
will automatically recognize ADCaster C2 and match the driver
2.3 Click “Windows Settings - System - Sound”, set “Comica_ADCaster C2”
as the default input/output device of the computer
2.4 Open the live streaming software on computer and check if
“Comica_ADCaster C2” is the default audio/playback device
14
Connection and Usage
Connect devices to ADCaster C2 referring to the following pictures
Audio
Input/Output
External
Audio Input
Mic Input
3V/5V/Wireless Mic)
Speaker Output Mic/Instrument Input
48V Condenser/
Dynamic Mic)
Audio
Input/Output
12
Microphone
Computer
2. Live Streaming on Computer
Monitoring Headphone
Phone for
Accompaniment
Phone for
Accompaniment
Microphone
Computer
1. Podcast on Computer
Monitoring Headphone
Standby Time
Streaming/Podcasting/Recording Multi-functional Audio Interface
ADCaster C2
User Manual
Foreword
Main Features
Notice
Thank you for purchasing COMICA Streaming/Podcasting/Recording
Multi-functional Audio Interface ADCaster C2
· 48kHz/24bit Record, Broadcasting-level Sound Quality
· Revolutionary CalMixTM Denoise Algorithm, Two-stage Denoise Mode
· Integrated XLR/6.35mm/3.5mm Interface, Support 48V Mic and Instrument
Input
· Multiple I/O Interfaces to Connect Phone, Tablet, and Computer
· Built-in Bluetooth 5.3 Chipset with Stable Transmission and Low Latency
· Support Individual Input Gain, Output Gain, and Monitor Volume Control
· Adjustable High/Mid/Low Tone, Reverb Depth, and Sound Pad Volume
· Support Auto-tune, 6 Scene Reverb, 6 Pitch Changers, and 12-step
Electronic Sounds
· 8 Sound Pads to Create Live Streaming and Podcasting Atmosphere
· Support Music Only/Dry Sound/Loopback/Ducking/Mute Function
· Support Real-time Monitoring and Audio Dynamic Monitor
· Operating Time Up to 6 Hours, Support Charging While Using
When working with other highly sensitive products, it is recommended
to adjust the gain of ADCaster C2 to the minimum before turning it on.
Users can then adjust the gain step by step to avoid sound peak or
audio feedback
When connecting to mics that do not require 48V phantom power,
please turn o 48V phantom power to avoid damage to the mics
Before connecting/disconnecting the microphones, please turn o the
48V phantom power to avoid damage to the devices
Please read this user manual thoroughly before using the product,
and keep it for future reference
Please do not expose the product to rain or moisture, and avoid
spilling water or other liquids on it
Please do not use or store the product near radiators, stoves, or other
heat-producing appliances
This product is of high-precision, please prevent it from dropping or
colliding
1 2
Packing List
Main Part:
Accessories:
ADCaster C2
3.5mm TRRS-TRRS Audio Cable x2 Charging Cable2 in 1 Audio Cable
Warranty CardUser Manual
多功能迷你直播录音一体声卡
ADCaster C1
用户使用手册
3
Components and Instruction
⑨ ⑨
⑧ ⑧
③ ③
1. High/Mid/Low Pitch Control Knob
Reduce/strengthen the high/mid/low pitch of the audio input through IN1/2;
turning to the midpoint keeps the original sound; turn counterclockwise to
reduce and turn clockwise to strengthen the pitch
2. AUX Input Volume Control Knob
Adjust the volume of audio signals input from Bluetooth, AUX, and USB-C
ports
3. Mic Gain Control Knob 1/2
Adjust the gain of IN1/2
4. Monitor Volume Control Knob
Adjust the monitor volume
5. Output Gain Control Knob
Adjust the total output gain
6. Reverb Depth Control Knob
Adjust the reverb depth of vocal signals input from IN1/2
7. Sound Pad Volume Control Knob
Adjust the volume of the 8 sound pads
8. Input1/2 Volume Control Fader
Push up/down to adjust the volume of IN1/2
9. Sound Pads
8 sound pads, including 4 preset audio eects
(applause/laughter/cheering/funny) and 4 custom audio eects.
Short press to turn on/o audio eects and the indicator turns on/o
9.1 How to set customized audio eects: Long press to start recording
and the indicator blinks; short press to stop recording. The longest
recording time is 15 seconds and the recording will stop automatically
when time is up. Short press the button again to repeat the audio recorded
and the previous audio will be overwritten after re-recording
4
Customized audio eect has not been recorded by default
5
10. Sound Eect Buttons
Short touch to turn on/o a function and the light will turn on/o
Music Only:
Remove the vocals in the background music and reserve the music part
Dry Sound:
Turn o all audio eects temporarily and output only the dry sound recorded
by the microphone
Loopback:
The audio input from the USB-C port can be recorded and output to the
computer via USB-C port. After turning the function o, the audio input from
USB-C port can be monitored, but cannot be output to the computer via
USB-C port
Ducking:
Lower the volume of background music to highlight vocals
Denoise:
Short press to tum on/switch/turn o denoise. The indicator shows blue when
the first-stage denoise is on, and shows orange when the second-stage
denoise is on. Denoise automatically fiIters background noise of mic1/2
MUTE:
Mute the output audio from IN1/2
6
11. Electron Switch Button
Short touch to turn on Electron. Short touch again to switch A-Ab eect and
the corresponding light will glow. When switch to Ab, short touch again to
turn o Electron. Long touch can also turn it o
5. Power Status Indicators
Show the interface’s power and charging status
5.2 Four lights blink in sequence while charging. When the battery life is
higher than 20%, the first light glows, the last three blink in sequence, and
so on
6. 48V Indicator1/2
Shows blue when 48V phantom power of IN1/2 is on
7. Bluetooth Indicator
Blinks when the Bluetooth is on and not connected. Glows when the Bluetooth
is connected
8. Auto Tune Switch Button
Short touch to turn on/o Auto Tune. When it is on, the light glows and the
ADCaster C2 will slightly fix the o-pitch notes in vocal performance of mic1/2
9. Scene Reverb Switch Button
Short touch to turn on Scene Reverb and switch Room/Stage/Hall/Host/MC/
KTV scene reverb and the corresponding light glows. When switch to KTV,
short touch again to turn o Scene Reverb. Long touch can also turn it o
10. Pitch Switch Button
Short touch to turn on Pitch and switch Male/Female/Baby/Monster/Electr./
Robot eect and the corresponding light will glow. When switch to Robot,
short touch again to turn o Pitch. Long touch can also turn it o
Auto Tune, Electron and Pitch cannot be used simultaneously; Pitch
and Scene Reverb cannot be used simultaneously
8 9
① ②
③ ④
10
4. USB-C Port
Connect smartphone/computer to input/output audio signal
5. Output Port1/2
3.5mm TRRS port, connect smartphone/computer/tablet to input/output
audio signal
6. Speaker Output Port
3.5mm TRS output port, connect speakers to output audio signal
7. AUX Input Port
3.5mm TRS/TRRS input port, connect smartphone/computer to input audio
signal
8. Input Port2(3.5mm)
3.5mm TRS input port, connect microphone to input audio signal
9. Input Port1/2(XLR/6.35mm)
Connect XLR/6.35mm microphone or instrument to input audio signal.
Support 48V phantom power
10. 48V/DM/INST Switch Button1/2
Adjust to switch between 48V phantom power mode (48V), dynamic mic
mode (DM) and instrument mode (INST). Switch to the corresponding
mode according to the input device of IN1/2 (XLR)
11. 3.5mm Monitor Port1/2
Plug in a TRS/TRRS headphone to monitor
12. Reset Hole
If there is an abnormal phenomenon such as a charging problem, insert a
reset pin into the reset hole to reset
1. Power Button
Long press to power on/o
2. Bluetooth Switch
Turn on/o Bluetooth
3. USB-C Charging Port
Connect power bank/DC power to get charged
11
① ②
③ ④
1. Input1/2 Dynamic Bar
Shows the input level of IN1/2
2. AUX Input Audio Dynamic Bar
Shows background music volume level
3. Output Audio Dynamic Bar
Shows the total output volume level
4. Monitor Audio Dynamic Bar
Shows the monitor volume level
Each audio dynamic bar contains 9 lights. 6 cyan at the bottom,
2 yellow in the middle and one red on the top. The more lights
glow, the higher the level is
7
80%-100% 60%-80% 40%-60% 20%-40%
four lights on three lights on two lights on one light on
20%
the first light
blinks
5.1 Battery life:
Up to three mics can be connected to ADCaster C2 at the same
time, including one 3.5mm mic and two XLR/6.35mm mics. Please
connect mics according to your need
1. ADCaster C2 supports live streaming on two dierent platforms
at the same time, please connect devices according to your need
2. ADCaster C2 supports live streaming on smartphone and
computer at the same time. Please connect devices according to
the diagrams of Live Streaming on Computer”
Computer

Tuotetiedot

Merkki: Comica
Kategoria: Ei luokiteltu
Malli: ADCaster C2

Tarvitsetko apua?

Jos tarvitset apua merkille Comica ADCaster C2 esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Comica Käyttöohjeet

Comica

Comica AX3 Käyttöohje

16 Lokakuuta 2024

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet