Creality K2 Plus Käyttöohje
Creality
3D-tulostin
K2 Plus
Lue alta 📖 käyttöohje suomeksi merkille Creality K2 Plus (27 sivua) kategoriassa 3D-tulostin. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä
Sivu 1/27
User nual
s 3D Printer
V 1.6_EN
K2 P s
Thank you for choosing Creality. For your convenience, please read through this User Manual before you sta and follow
the instructions provided carefully.
Creality is always ready to provide you with high-quality seices. If you encounter any issues or have any questions when
using our products, please use the contact information at the end of this manual to contact us. To fuher improve your
user experience, you can nd more about our devices via the following methods:
User manual: You can nd instructions and videos in the USB ash disk provided with the printer.
You can also visit our ocial website (https://www.creality.com) to nd information regarding software, hardware,
contact information, device instructions, device warranty information, and more.
1. You can upgrade the rmware directly through the device screen;
2. You can upgrade the rmware via the Creality Cloud OTA;
3. Please visit the ocial website https://www.creality.com, click on “Suppo → Download Center ” , select the corresponding
model to download the required rmware, (Or click on“Creality Cloud → Downloads → Firmware”) , after installation is complete,
you can use it.
To Our Dear Users
Firmware Upgrade
Product Operation and After-Sales Seice Information
1. You can log in to the Creality Ocial Wiki (https://wiki.creality.com) to explore more
detailed after-sales seice tutorials.
2. Or contact our after-sales seice center at +86 755 3396 5666, or send e-mail to
cs@creality.com.
Creality Wiki
NOTES
1. Do not use the printer in any way other than described herein in order to avoid personal inju or propey damage;
2. Do not place the printer near any heat source or ammable or explosive objects. We suggest placing it in a well-venti-
lated, cool and dustless environment;
3. Do not expose the printer to a violent vibration or any other unstable environment, as this may cause poor print
quality;
4. Please use recommended laments to avoid clogging of the extrusion head and causing damage to the machine;
5. Do not use the power cable of other products during installation. Always use a grounded three-prong power outlet,
which accompanies the printer;
6. Do not touch the nozzle and the heated bed during operation to avoid burns or personal inju;
7. Do not wear gloves or wraps while operating the machine to prevent entrapment of movable pas that could cause
crushing and cutting injuries to bodily pas;
8. Use the provided tools to clean the lament from the extruder in time taking advantage of the residual temperature
after printing. Do not touch the extruder directly when cleaning, otherwise it may cause burns;
9. Clean the printer frequently. Clean the printer body with a d cloth regularly after powering o the printer, wipe away
dust, bonded print lament and foreign objects on the guide rails;
10. Children under 10 years old should not use the printer without supeision, otherwise it may cause personal inju;
11. Users should comply with the laws and regulations of the corresponding countries and regions where the equipment
is located (used), abide by professional ethics, pay attention to safety obligations, and strictly prohibit the use of our
products or equipment for any illegal purposes; Creality will not be responsible for any violators' legal liability under any
circumstance;
12. Tip: Do not plug in or unplug wires on a charged basis.
Tuotetiedot
| Merkki: | Creality |
| Kategoria: | 3D-tulostin |
| Malli: | K2 Plus |
Tarvitsetko apua?
Jos tarvitset apua merkille Creality K2 Plus esitä kysymys alla ja muut käyttäjät vastaavat sinulle
3D-tulostin Creality Käyttöohjeet
17 Tammikuuta 2025
17 Tammikuuta 2025
25 Joulukuuta 2024
25 Joulukuuta 2024
25 Joulukuuta 2024
25 Joulukuuta 2024
3D-tulostin Käyttöohjeet
- 3D-tulostin Wasp
- 3D-tulostin Raise3D
- 3D-tulostin Creality3D
- 3D-tulostin Craftbot
- 3D-tulostin MakerBot
- 3D-tulostin Orbbec
Viimeisimmät 3D-tulostin Käyttöohjeet
27 Tammikuuta 2025
15 Tammikuuta 2025
15 Tammikuuta 2025
10 Tammikuuta 2025
29 Joulukuuta 2024
12 Joulukuuta 2024
16 Lokakuuta 2024
16 Lokakuuta 2024