CRUX CFD-05VY Käyttöohje

CRUX Valvontakamera CFD-05VY

Lue alta 📖 käyttöohje suomeksi merkille CRUX CFD-05VY (1 sivua) kategoriassa Valvontakamera. Tämä opas oli hyödyllinen 6 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/1
CFD-05VY
Third Brake Light Camera with 1/3” Sony CCD Sensor
for Ford Transit Full Size Vans 2014 - 2015
- Uses 1/3” Sony CCD sensor. a
- Replaces the factory third brake light to maintain the OEM look.
- LED brake light included.
- 6 Infra Red LEDs for night me use.
- With built-in microphone.
- Uses 4-pin aviaon type water resistant connectors.
PRODUCT FEATURES:
PARTS INCLUDED:
R
INTERFACING SOLUTIONS
Sightline
CAMERAS
1. Third Brake Light camera
2. Extension cable
3. 4-pin aviaon connector to RCA adapter
4. Male to Male RCA adapter
INSTALLATION INSTRUCTIONS:
1. Remove the factory third brake light.
2. Run the extension cable provided towards the radio.
3. Plug the 4-pin aviaon connector of the extension cable to the camera cable.
4. Make the power and video connecons at the radio or aermarket monitor.
5. Tap the CFD-05VY brake light wires to the factory brake light wires.
6. Test the camera and third brake light prior to installing.
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.082520
VEHICLE APPLICATIONS:
2014 - 2015 Transit Van
To Aftermarket Radio
Backup Camera Input
OR
Reverse Camera Interface
Backup Camera Input
RED Wire to brake light +12V
BLACK Wire Ground
Extension Cable
RED wire camera Power +12V
Ground
MIC Output
Video Output
FORD
1
SPECIFICATIONS:
Sensor: 1/3” SONY CCD sensor.
Pixels: 975H x 582V (NTSC)
Resoluon: 600TVL (horizonal)
Viewing Angle: 150°
Illuminaon: .01Lux (18 IR LEDs)
Connecon: G16 Aviaon 4pin connectors

Tuotetiedot

Merkki: CRUX
Kategoria: Valvontakamera
Malli: CFD-05VY

Tarvitsetko apua?

Jos tarvitset apua merkille CRUX CFD-05VY esitä kysymys alla ja muut käyttäjät vastaavat sinulle