CRUX CLP-140 Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille CRUX CLP-140 (1 sivua) kategoriassa Valvontakamera. Tämä opas oli hyödyllinen 6 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/1
Crux Interfacing Solutions • Chatsworth, CA 91311
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.092420
CLP-140
Wide Angle License Plate Camera
with 720p AHD Sensor and140 Degree Viewing Angle
1
- 140 degree viewing angle
- 720p AHD chipset for a clearer image
- Low light sensitivity
- With optional parking guide lines
- Includes a license plate and buttery mount for mounting exibility
PRODUCT FEATURES:
PARTS INCLUDED:
INSTALLATION DIAGRAM:
CLP-140 CAMERA EXTENSION CABLE Buery Mount
WHITE Wire
Parking Guideline
Cut = ON
Joined = OFF
Regulator
Extension Coax Cable
GROUND
RED Wire (A)*
License Plate Camera
RED Wire (B)*
Make sure the arrows
line up and push in
the connectors well.
To Aftermarket Radio
Backup Camera Input
OR
Reverse Camera Interface
Backup Camera Input
*NOTE: The camera needs a +12V trigger. Power the camera at the headunit using RED Wire B or from the reverse light
wire using RED Wire A. DO NOT connect both wires to +12V at the same me. Insulate the red wire that is not being
used. Tap the Black wire to an exisng ground lead, or ground Black wire securely to vehicle body metal.
R
INTERFACING SOLUTIONS
Sightline
CAMERAS
1. Remove the license plate. 2. The license plate bar is mounted
behind the license plate.
3. Adjust the angle if necessary.
LICENSE PLATE CAMERA INSTALLATION:

Tuotetiedot

Merkki: CRUX
Kategoria: Valvontakamera
Malli: CLP-140

Tarvitsetko apua?

Jos tarvitset apua merkille CRUX CLP-140 esitä kysymys alla ja muut käyttäjät vastaavat sinulle