Crystal Video Pro 800 Plus Käyttöohje

Lue alta 📖 käyttöohje suomeksi merkille Crystal Video Pro 800 Plus (28 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/28
Version:1 .2
Model:CP7041+CP3041
PRO 800 Plus
2018.11.05
User Manual
Please read this user manual carefully before you use this product. It contains all the necessary
notes and Important things regarding operating the product. In accordance with the safety
precautions and operating Instructions listed in this user manual, we assure the product’s
long-term lifetime. Following cases are not included for normal lifetime assurance:
Repairing or modification have been executed by unauthorized personnel;
Damages caused by accidents including but not limited to lightning, fire, exposed under
rain and moisture
Damages caused by using power adapter, whose output voltage is not in the allowed range
required, which is shown on device label.
The model label on the product has been modified or the warranty tag has been removed by
unauthorized personnel.
To reduce the risks of electric shock, do not remove or open
the cover.No spare parts for user are included, please return
to original factory for maintenance.
Be careful of the scalding by the high temperature during the
working of device, especially under hot weather.
Please use the standard power adapter or non-standard power
adapter with the same electrical parameters as that of standard
one.
Be sure that the device is powered off when connecting to other equipment
(such as monitor or TV).
Be sure that the power socket output voltage within the required range to prevent electric
shock or fire , short circuit.
Electrical plug used on the receivers and transmitters power cord are compliant with the
rated voltage range.
Do not place any heavy articles ON the power cord. To avoid being stepped on or pinched by
heavy items, the power cords should not be located where people pass by frequently.
Do no overload the power socket and its extension cord, otherwise could result in electric
shock or fire.
Disconnect the plug from the wall socket when lighting weather happens.
Disconnect the plug from the wall socket if the product is unused for long time.
Do not exposed to dripping or splashing. Do not place any container filled with liquid on the
product (eg. vases ).
Do not block or stick anything on the air vent of product ; Do not remove the cover or put
objects just like steel pins Into the gap of the air vent to avoid electric shock ,
Please place the receiver / transmitter on flat and stable surface.
Be sure that there is adequate ventilation distance between the receiver and TV, also away from
direct sunlight or any source of heat. Blocking the air flow can damage the product.
Do not expose the receiver or transmitter to rain or moisture to reduce the risk of electric shock
or fire.
We endure no responsibility for any damages or bad results caused by using non-standard
adapters.
Although the transmit signal has been encrypted, you still need to pay attention to the
deliberate interception. It is possible that a third party intentionally intercepts the transmission
signal since the product adopt wireless communication. Please do not use the product on
confidential and very important communications or life-related communications. The main
concern is that the content of wireless communication might be received by the third wireless
devices deliberately.
For the serious path loss or interference by wireless signals(such as the following cases),
the received audio and video signals maybe abnormal (such as pausing, mosaic, noise, etc).
1) Thick cement wall existence between transmit and receiver, which will cause serious signal loss
for transmission.
2) Quite close to the refrigerator, microwave ovens or other fitments with large metal surface.
3) Places where crowded person and vehicles passing through.
Although this product is designed and tested to comply with national electrical safety standard,
there will be noise caused by the interference from other machines in rare cases. If this happens,
please try to increase the distance from other machines.
The product is susceptible to interference from nearby strong 5GHz wireless signals from
WLAN or other devices, which will cause less communication distance or worse picture effect.
Optimal distance between transmitter and receiver refers to that line of sight distance.
Obstacles between transmitter and receiver may shorter the communication distance .
Do not install the transmitter and receiver within metal box, as it will shield the wireless signals.
It needs 15-20 seconds to boot the system before normal work.

Tuotetiedot

Merkki: Crystal Video
Kategoria: Ei luokiteltu
Malli: Pro 800 Plus

Tarvitsetko apua?

Jos tarvitset apua merkille Crystal Video Pro 800 Plus esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Crystal Video Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet