Dual XDC100BT Käyttöohje

Dual Autoradio XDC100BT

Lue alta 📖 käyttöohje suomeksi merkille Dual XDC100BT (24 sivua) kategoriassa Autoradio. Tämä opas oli hyödyllinen 6 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/24
INSTALLATION/OWNER'S MANUAL
AM/FM/CD/USB Receiver
XDC100BT
2
XDC100BT INSTALLATION
Preparation
Please read entire manual before installation.
Before You Start
Disconnect negative battery terminal. Consult a qualified technician for
instructions.
Avoid installing the unit where it would be subject to high temperatures, such
as from direct sunlight, or where it would be subject to dust, dirt or excessive
vibration.
Getting Started
Remove trim ring from unit.
Remove 2 transit screws located on top of the unit.
Insert the supplied keys into the slots as shown, and slide the unit out of the
mounting sleeve.
Install mounting sleeve into opening, bending tabs to secure.
Connect wiring harness and antenna. Consult a qualified technician if you are
unsure.
Certain vehicles may require an installation kit and/or wiring
harness adapter (sold separately).
Test for correct operation and slide into mounting sleeve to secure.
TYPICAL FRONT-LOAD
DIN MOUNTING METHOD
3
XDC100BT INSTALLATION
Wiring Diagram
FUSE
When replacing the
fuse, make sure new
fuse is the correct type
and amperage. Using
an incorrect fuse could
damage the radio.
The
10 amp ATC fuse
located beside the wiring
connector.
unit uses one
Antenna
Connector
Remote Turn On
Connect to amplifier or power
antenna. Insulate wi if not used.re

Tuotetiedot

Merkki: Dual
Kategoria: Autoradio
Malli: XDC100BT

Tarvitsetko apua?

Jos tarvitset apua merkille Dual XDC100BT esitä kysymys alla ja muut käyttäjät vastaavat sinulle