Ferrofish Pulse 16 MX Käyttöohje

Ferrofish Ei luokiteltu Pulse 16 MX

Lue alta 📖 käyttöohje suomeksi merkille Ferrofish Pulse 16 MX (14 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 2 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/14
1
Users Guide
F ERROFISH PULSE16 / PULSE16 MX
Professional - A – D/ 16 x 16 channel /D A converter
F ERROFISH Brüderstrasse 10, 53545 Linz am Rhein
www.ferrofish.de
Version 2.0b
3
Introduction
Dear customer,
thank you for purchasing our product. We are very pleased that you have
chosen the PULSE16 series from our product range. let you The PULSE16
simultaneously convert 16 analog channels to digital and 16 channels to
analog. As digital interfaces, you can choose between ADAT and MADI
(Pulse16 MX and MADI Option only), and you can freely route between
them in groups of 8 channels. We also added a headphone output so you
can monitor mono or stereo channels from an arbitrary source.
Two TFT screens show all analog input and output levels at a time. The
intuitive one knob operation makes using the PULSE16 a breeze. We
sincerely hope that you will enj as much as we oy using your PULSE16
enjoyed developing it. If you have any suggestions, praise or criticism for
us, please visit us on Facebook or at www.ferrofish. com.
Best greetings from Linz near the river Rhine.
The Ferrofish Team
Scope of Delivery
This package includes:
1x PULSE16 device
1x Instructions (German & English)
1x Power supply 12V
Symbols used in this manual
This symbol indicated sections of detailed explanation.
Paragraphs showing this symbol require the readers attention.
Software and Updates
For more information, updates and support please visit our website: www.ferrofish.com
7
Main Menu CLOCK
Inside this menu you can select the source of the wordclock and the sample
frequency of the PULSE16 when running as Master/ ader Le :
Clock Screen P Clock Screen PULSE16 (left) – ULSE16 MX (right)
The numbers below the labels show the internal generated clock frequency
when set to Master/Leader or the measured external sample frequency. If
no sample rate is detected “ ---” is shown.
MASTER
If the clock source is set to Master/Leader, the internal wordclock
generator of the 16 is used. All other digital devices attached have PULSE
to be set to Slave/ Follower.
ADAT + MADI (MX or MADI option only)
The wordclock is extracted and conditioned from the ADAT or MADI data
stream and send to the Wordclock output. The conditioning is done via a
proprietary circuit.
BNC
When using an external wordclock on the BNC IN of the PULSE16, the
wordclock signal will also be routed thru the jitter reduction stage and sent
back to the BNC OUT.

Tuotetiedot

Merkki: Ferrofish
Kategoria: Ei luokiteltu
Malli: Pulse 16 MX

Tarvitsetko apua?

Jos tarvitset apua merkille Ferrofish Pulse 16 MX esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Ferrofish Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet