Fezz Sagita Evo Käyttöohje

Fezz Ei luokiteltu Sagita Evo

Lue alta 📖 käyttöohje suomeksi merkille Fezz Sagita Evo (6 sivua) kategoriassa Ei luokiteltu. Tämä opas oli hyödyllinen 17 henkilölle ja sai 4.5 tähden keskimäärin 2 käyttäjältä

Sivu 1/6
U SER`S MA NU A L
S AG ITA
2




2


3

3
Unpacking
3
Package content
3

4
Interconnection
4
Hook up the signal source
5
Power cord hook up
5

5

5

TA B L E OF C O N T E N TS
Type: Line preamplier
Model: Sagita, Line: Evolution
Inputs: 7x RCA + 1 direct
Ouputs: 2x RCA
Harmonic distortion THD: <0,005%
AC fuse: 0,2A T
Power consumption: 12W
Net weight 9,5 kg
Dimensions 420x380x95mm
Optional equipment: remote control
3
- Never place the preamplier near heat sources, such as radiators, heaters or direct sunlight. Ensure adequate ventilation
and airow
- We also warn against exposure of the preamplier to conditions such as very low temperatures and/or high humidity.
- The preamplier should be plugged directly into a wall socket. If you must use an extension cord, please make sure that it
has load parameters sucient to ensure proper handling of current delivery to the device.
- When cleaning, always disconnect the preamplier from the power source. Use a dry, soft cloth. Do not use water or
cleaning agents.
- If your preamplier starts to misbehave or to work incorrectly, if it’s temperature gets too high or you start feeling smoke -
immediately disconnect the device from the mains.
- Due to the risk of exposure to high voltages – please do not open the lid of the preamplier. ATTENTION: This warning
remains in force also in a situation where the device is already disconnected from the wall outlet.
- Always replace fuses in accordance with the original, intended specication.
- Do not make repairs on your own, or adjustments beyond those as described in this manual. Execution of any
unauthorized repairs or modications of the device result in a loss of warranty
New version of Sagita line preamplier. In standard equipped with anti-vibration feet, adapted to the weight of the device.
Backlight logo. Sagita Fezz Audio is a top-class line preamplier equipped with 8 RCA inputs, including one direct. Two pairs
of RCA outputs creates a possibility to be used in a Hi- systems, based on up to four monophonic power ampliers. It is a
perfect match with tube-based and transistor sets. Sagita provides linear sound without unnecessary tone coloration. The
Sagita pre-amp is based on the high-end Burson V6 Vivid opamps. An important part of the power section is the audio grade
Toroidy.pl transformer.
  


Please kindly check if the packaging of the Sagita preamplier has not been damaged during transit. If you nd any damages,
please immediately contact your dealer. Remove the preamplier and accessories from the packaging. Make sure that the
content is not damaged.



U N PA CK I N G
Package contains:
Sagita preamplier
Power cord
User`s manual
Warranty card

CO N TE N T S O F T H E P A CK AG E

Tuotetiedot

Merkki: Fezz
Kategoria: Ei luokiteltu
Malli: Sagita Evo

Tarvitsetko apua?

Jos tarvitset apua merkille Fezz Sagita Evo esitä kysymys alla ja muut käyttäjät vastaavat sinulle




Ei luokiteltu Fezz Käyttöohjeet

Ei luokiteltu Käyttöohjeet

Viimeisimmät Ei luokiteltu Käyttöohjeet